Water restoration technician Exam
Questions and Answers 100% Accurate
Restorative drying is a process used to recover from many forms of water intrusion by -
ANSWER-Assessment documentation control dryeing selective replacement
The systems of drying Have been detailed in several key documents including the I
RCRCS 500 standard in reference guide for professional water damage restoration -
ANSWER-Standard of care
The goal of the restoration process is to transform an abnormal with potentially damage
structure into environment that can be real occupied of legal or better appearance and
cleanliness that before the intrusion occurred to do so in the most - ANSWER-
Economical and efficient means possible
The restore begins this Process By identifying all affected materials water must be
tracked from its initial source and diligently followed in every direction it migrated to
establish your an accurate perimeter once the perimeter is identified at the restore then
document what type of materials have been - ANSWER-Affected
Affected materials are evaluated against three criteria to determine if they should be
restored or replacedThe three criteria are - ANSWER-Degree of contamination damage
to the item replacement cost versus restoration cost
After identifying the material and considering contamination damage and caused the
restored decides which material should be dried in which material should be replaced in
addition to the restore will also decide which method of drawing should be used
including - ANSWER-Drained aggressively disruptive
All materials that are determined restorable are inspect it further and the amount of
moisture absorbed by the material is - ANSWER-Measured and documented
Dream process is noted during daily Monitoring visits the restore asks is it drying while
comparing two sets of data on the first and second set of data recorded on the
, monitoring reports reflect the impact of the drain effort on the affected materials over a
______ period - ANSWER-24
If materials are not drying the restore most reevaluate the equipment systems and
processes the current system is not working______Arerequired - ANSWER-Change
Throughout the process materials will return to normal moisture levels. The restore must
constantly ask is it done? There in the motor in process. This means the restroom us
know what "done" is. The materials must be compared against a - ANSWER-Dry
standard or dry goal
It is important that restoration processes and procedures are Carefully evaluating To
ensure that they are appropriate. Because every job is different, the approach should
also be - ANSWER-Unique
The first line of defense against potential safety hazard is - ANSWER-Awareness
It is important to ensure a_______ Level of protection one considering PPE - ANSWER-
Proper
They close evolution of potential____Is necessary in order to identify which type of PPE
would be most appropriate - ANSWER-Risk
To address the many hazards associated with restorative drying work, contractors need
to have ready access to several items these items include - ANSWER-Chemical
resistant gloves
Splash goggles
Appropriate rest Respirator
Hard hat
Rubber boots with harden shank
Protective clothing
Questions and Answers 100% Accurate
Restorative drying is a process used to recover from many forms of water intrusion by -
ANSWER-Assessment documentation control dryeing selective replacement
The systems of drying Have been detailed in several key documents including the I
RCRCS 500 standard in reference guide for professional water damage restoration -
ANSWER-Standard of care
The goal of the restoration process is to transform an abnormal with potentially damage
structure into environment that can be real occupied of legal or better appearance and
cleanliness that before the intrusion occurred to do so in the most - ANSWER-
Economical and efficient means possible
The restore begins this Process By identifying all affected materials water must be
tracked from its initial source and diligently followed in every direction it migrated to
establish your an accurate perimeter once the perimeter is identified at the restore then
document what type of materials have been - ANSWER-Affected
Affected materials are evaluated against three criteria to determine if they should be
restored or replacedThe three criteria are - ANSWER-Degree of contamination damage
to the item replacement cost versus restoration cost
After identifying the material and considering contamination damage and caused the
restored decides which material should be dried in which material should be replaced in
addition to the restore will also decide which method of drawing should be used
including - ANSWER-Drained aggressively disruptive
All materials that are determined restorable are inspect it further and the amount of
moisture absorbed by the material is - ANSWER-Measured and documented
Dream process is noted during daily Monitoring visits the restore asks is it drying while
comparing two sets of data on the first and second set of data recorded on the
, monitoring reports reflect the impact of the drain effort on the affected materials over a
______ period - ANSWER-24
If materials are not drying the restore most reevaluate the equipment systems and
processes the current system is not working______Arerequired - ANSWER-Change
Throughout the process materials will return to normal moisture levels. The restore must
constantly ask is it done? There in the motor in process. This means the restroom us
know what "done" is. The materials must be compared against a - ANSWER-Dry
standard or dry goal
It is important that restoration processes and procedures are Carefully evaluating To
ensure that they are appropriate. Because every job is different, the approach should
also be - ANSWER-Unique
The first line of defense against potential safety hazard is - ANSWER-Awareness
It is important to ensure a_______ Level of protection one considering PPE - ANSWER-
Proper
They close evolution of potential____Is necessary in order to identify which type of PPE
would be most appropriate - ANSWER-Risk
To address the many hazards associated with restorative drying work, contractors need
to have ready access to several items these items include - ANSWER-Chemical
resistant gloves
Splash goggles
Appropriate rest Respirator
Hard hat
Rubber boots with harden shank
Protective clothing
