BNSF Roadway Worker Protection Questions With Verified Correct Answers

1. Roadway Worker Protection training - Correct Answer C. Must be renewed annually. 2. The cardinal rule of railroading is: - Correct Answer B. Always expect a train or equipment to move on any track in either direction at any time. 3. "Fouling" the track means being within __ feet of the field side of the nearest rail. - Correct Answer A. 4 4. According to the FRA, when working in the foul: - Correct Answer B. A person or equipment could be struck by a train or on-track equipment. 5. The following are roadway workers. - Correct Answer A. Contractor employees whose duties for a railroad client may require fouling a track. 6. Roadway workers are responsible to ascertain on track safety is provided: - Correct Answer B. Prior to fouling the track. 7. A roadway worker shall not foul a track except : - Correct Answer A. When necessary for the performance of duty. 8. Roadway workers who perform work in the fouling space must do all of the following except: - Correct Answer C. Must be trained in the General Code of Operating Rules 9. What must an EIC do before any roadway worker fouls a track? - Correct Answer C. Conduct an on-track safety job briefing. 10.When is an on-track safety job briefing considered complete? - Correct Answer B. When each roadway worker acknowledges understanding of protection provided. 11. A roadway worker has a "Right to Challenge". When concerned about compliance with on-track safety rules he/she must report his/her concerns to: - Correct Answer A. The EIC. 12. The method of on-track safety used depends on what factors? - Correct Answer D. All of the Above 13. When using train approach warning method of on-track safety, roadway workers must ensure they can clear the track and be in a predetermined place of safety: - Correct Answer C. At least 15 seconds prior to train arrival. 14. A Watchman/Lookout is required for this type of on-track safety. - Correct Answer D. Train approach warning 15.