SCTE BPI EXAM STUDY GUIDE Questions with 100% Correct Answers

Certifying the reliability of the customers drop system involves Correct Answer Replacing any defective drop components What is one step in verifying that the digital set-top terminal is operating normally? Correct Answer Calling dispatch or the person designated with access to the billing system software to have the set-top terminal authorized When installing the NIU, you would use Correct Answer A dial-pulse telephone test set to check dial tone on inbound and outbound call capability In twisted pair cable network powering, Correct Answer Always wire the twisted pair power cables first to the NIU power terminals and then to the power terminal of the power distributing tap Telephony inside wiring Correct Answer Is routed from the NID or distribution device through the appropriate compression fitting When testing and verifying NIU operation Correct Answer Call the provisioning center from the test phone or butt set to verify the ability to place an outbound call Items to check in order to certify the reliability of the customer drop system include Correct Answer Installing high pass filters and directional couples, if needed///monitoring, detecting, and eliminating signal leakage The customer access are of an NIU Correct Answer Provides access to the broadband cable output port, RJ-11 testjacks, and telephone tip and ring wiring connectors Which of the following are tests/measurements than can be made on a VOM? Correct Answer Voltage DC&AC///Opens and shorts The federal government mandates the amount of _________________ that is acceptable for cable networks Correct Answer egress Certifying the reliability of the customers drop system requires Correct Answer eliminate signal leakage////check condition and integrity of the drop system What is the main purpose for the MAC address on a EMTA? Correct Answer provides that authorization to ensure only the customers account in the billing system is assigned to that address