Osha 30 Construction Final Exam

OSHA 30 CONSTRUCTION FINAL EXAM 1. OSHA requires training to be provided within one year of when a safety and health program is first established A. True B. False (correct answer) The minimum safe distance for equipment operating in proximity to energized power lines that contain up to 50,000 volts is A. 25 feet B. 5 feet C. 10 feet (correct answer) D. 50 feet The GFCI fits into the standard electrical outlet box to protect ground faults. A. Disposable B. Receptacle (correct answer) C. Plastic D. None-conductive Some states may have more stringent requirements than Federal OSHA for working over or near water A. True (correct answer) B. False Load chart ratings will differ when: A. Outriggers are fully-extended B. Outriggers are half-extended C. No outriggers (picking from rubber) D. All of the above (correct answer) The most important A. color B. cons C. degree D. geo (correct answer) Complexity of training depends on which of the following? A. Size and complexity of the worksite B. Characteristics of the hazards and potential hazards at C. The training budget D. All of the above E. Both A and B (correct answer) Federal OSHA requires the employer to initiate and maintain such safety and health programs to ensure a safe and healthful place of employment A. Never B. Sometimes C. Only for governmental agency’s D. True, for all places of employment (correct answer) If it can not fix a serious hazard immediately, you should A. Complain to management B. Hide it C. Prevent employee exposure D. Communicate the hazard to the crew and subs, use signs and bar E. Both C and D (correct answer) Gloves used for electrical work must be inspected and tested prior to use, and be certified every: A. 30 days B. 6 months (correct answer) C. 12 months D. Never Underground electrical hazards are: A. Easy to identify B. Difficult to locate exactly, and may pose a serious risk to laborers and backhoe operators (correct answer) C. Always marked exactly where they are located D. Always buried in red concrete In an effective program, management regards worker safety and health as which the following? A. An overhead expense that is a wasteful part of doing business B. A fundamental value of the organization C. An important business goal D. Both B and C (correct answer) E. None of the above Which of the following is necessary training topics for employees? A. The workplace plan in case of a fire or other emergency B. General site hazards and hazards unique to a workers activity. C. When and where PPE is required D. All of the above (correct answer) Which statement below would be most correct? A. OSHA requires that all employers have “written” safety and health programs B. OSHA encourages employers to clearly document their safety and health programs. (correct answer) C. Written safety and health programs are always required D. Safety and health training E. None of the above. Back disorders, strains and sprains, carpal tunnel syndrome are examples of what type injury A. Chemical exposures B. Musculo-skeletal disorders (MSD's) (correct answer) C. Biological hazards D. None of the above Successful safety leaders generally posses which of the following A. Good people and communication skills B. Work to gain trust and respect with others C. Vision and passion D. Always setting the example as a safety role model E. All of the above (correct answer) An incident investigation: A. Is good for finding who to blame when an incident occurs B. Should focus primarily on the behaviors of those who were closest to an incident C. Should focus primarily on the immediate cause of an injury D. Will help an employer reduce factors that create unsafe conditions (correct answer) Training topics for employees who are exposed to fall hazards should include A. All roof fall hazards that may be encountered B. Fall protection standards and requirements C. Procedures for erecting, maintaining, disassembling, inspecting, fail and using D. Processes for reporting problems or obtaining guidance on fall protection issues E. A All the above (correct answer) Hand Arm Vibration (HAV) can A. Result from using hand-held power tools B. Cause carpal tunnel syndrome in the fingers and hands C. Result in the loss of sense of touch D. All of the above (correct answer) An annual inspection of each crane: A. Is required by OSHA B. Must be documented C. Is typically kept with the crane D. All of the above (correct answer) The means by which workers develop and/or express their own commitment to safety and health protection is an exam A. Management commitment B. Employee involvement (correct answer) C. Worksite analysis D. None of the above OSHA has long recognized that the implementation of a safety and health program is a way of A. Saving on the need for additional compliance officers B. Not having to comply with OSHA's most rigorous requirements C. Demonstrating good faith by an employer with respect to safety and health (correct answer) D. All of the above An important feature of a hot work permit includes which of the following? A. An inspection of the area and isolation of combustibles and flammable materials B. Establishment of trained fire watches (correct answer) C. Standby employee with portable fire extinguishing equipment D. Written authorizations to conduct the work E. All of the above Which of the following is allowed for accessing a scaffold? A. Ladder B. Stair tower C. Ramp and walkway D. All the above (correct answer) Hazard Prevention and Control includes which of the following? A. Elimination and control workplace hazards B. Establishment of a preventive maintenance program C. Training and information for employees D. Record and analyze occupational injuries and illnesses. E. All the above (correct answer) Spoil piles should be backed off from the side of a trench by a minimum distance of A. Not less than 1 foot B. Not less than 2 feet (correct answer) C. Not less than 6 feet D. None of the above A safety and health program should be A. Consistent with standard industry-wide programs B. Personalized and tailored to the specific job hazards at a workplace (correct answer) C. Written in a way so that it will never need to be changed D. Written so that it can be used by all facilities of an single organization Supervisors should receive specific training in leadership skills such as: A. Hierarchy of controls B. Being in charge C. Communication and coaching (correct answer) D. Taking and receiving A must be available to direct workers who are constructing or moving scaffolds. A. Qualified Inspector B. OSHA Inspector C. Supervisor D. Competent Person (correct answer) A hazard is defined as a situation or condition that has the potential to cause harm to: A. Life B. Health C. Profits D. Schedule E. Both A and B (correct answer) Once completely erected, the jacking mast tower crane must be retested A. True (correct answer) B. False The top section of an extension on a straight ladder should: A. Be used by itself B. Not be used by itself (correct answer) C. Never be used at all D. None of the above When a circular saw is withdrawn from the work material, the lower guard must automatically return to the covering position A. True (correct answer) B. False Lift slab operations Lift-slab operations must be designed and planned by A. A registered professional engineer experienced in lift-slab construction. (correct answer) B. Qualified Person. C. Superintendent for the operation. D. OSHA inspector. Concrete buckets equipped with hydraulic or pneumatic gates shall have A. Positive safety latches or similar safety devices. (correct answer) B. Plate to indicate date of design. C. All of the above D. None of the above When the employer receives an OSHA citation, it must be: A. Contested and filed with the courts B. Copied and mailed to each worker C. Posted for 3 days or until the violation is fixed (correct answer) D. Signed and returned to OSHA The CFR Parts, such as Part 1926 for Construction, are further broken down into , which group together specific and detailed standards. A. Bullets B. Pieces C. Slices D. Subparts (correct answer)