CDL Practice (100% Accurate Answers)

What is the minimum number of tiedowns that a flatbed load must have? correct answers 2 Which of the following should you NOT do if you experience a tire failure? Hold steering wheel firmly brake hard and immediately stay off brake pedal be aware that a tire has failed correct answers Brake hard and immediately Before you transport a sealed load, you should check correct answers Whether the load is properly balanced and secured in the vehicle If your vehicle has an automatic transmission, when should you select a low range? correct answers When you're about to enter a downgrade The minimum tire tread depth for front tires is correct answers 4/32-inch depth To stay alert while you're driving, you should do what? correct answers Take short breaks before you start to feel drowsy If your brakes get wet, they may correct answers apply unevenly What type of fire should you NOT use a B:C fire extinguisher on? correct answers Wood Which of these is NOT part of the basic method for shifting up? Pushing in clutch and shifting into a higher gear at the same time Releasing the clutch accel. while pressing the clutch and turning towards the drivers side releasing clutch and pressing gas pedal at same time correct answers Accelerating while pressing the clutch and turning towards the driver's side Under WI Implied Consent Law... correct answers Drivers must consent to alcohol or drug testing if asked to do so by a police officer Why should you cover your cargo? correct answers To protect against spillage, state requirement, weather protection On a long or steep downgrade, once you have reached your "safe" speed, brake until you are traveling correct answers 5mph slower What is true about oversized loads? correct answers Requires special transit permit On a long or steep downgrade, once you have reached your "safe" speed, brake until you are traveling correct answers Other vehicles and traffic signs