FCTC Study Guide Test prep Correct 100%(RATED A+)

Grooming Standard Essay - ANSWERSTake 10 minutes to read and write about the grooming standards Gears - ANSWERSA gear or cogwheel is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part to transmit torque Gear Train - ANSWERSTwo or more gears working in a sequence meshed - ANSWERSIf the gears are touching adjacent - ANSWERSnear, next to, adjoining If the gears are touching then which way are the adjacent gears roatating? - ANSWERSMove in opposite directions Rack - ANSWERSa non-rotating toothed part, called a When two gears mesh, and one gear is bigger than the other (even though the size of the teeth must match), what occurs - ANSWERSmechanical advantage is produced, with the rotational speeds and the torques of the two gears differing in an inverse relationship. Spur gears - ANSWERSstraight-cut gears parallel - ANSWERSSide by side and having the same distance continuously between them:"parallel lines never meet" A belt and pulley system is characterized by - ANSWERStwo or more pulleys in common to a belt clockwise - ANSWERSflowing the same direction a clock would flow Counter clockwise - ANSWERSFlowing the opposite direction a clock would flow analogous - ANSWERScomparable flanges - ANSWERSan edge that sticks out used to strengthen an object by holding it in