PA state inspection categories test Questions & Answers(RATED A+)
how should steering components be maintained? -ANSWER - the steering component should be in safe operating conditions the steering wheel shall have a minimum outside diameter of ?? -ANSWER - 13 inches a passenger car manufactured after June 30, 1967 and designated as a 1968 or later model shall be equipped with what? -ANSWER - service brake system with rupture failure design that doesn't not result in complete brake loss brake lines shall be approved for use as -ANSWER - brake lines what shall a vehicle specified in this chapter be equipped with? -ANSWER - parking brake what should a parking brake be adequate to hold the vehicle on? -ANSWER - ice or snow on a 20% grade a radial ply tire shall not be used on? -ANSWER - the same axle as a belted or bias tire different types of tires -ANSWER - different types of tires shall not be used on the same axle unless in the event of an emergency Non-Pneumatic tires -ANSWER - only if originally equipped by the manufacturer and or an antique vehicle ice grips or studs -ANSWER - may not be equipped if they have projections greater than 2/32nds tires and rims -ANSWER - must meet or beat manufacturer specs
Written for
- Institution
- PA state inspection categorie
- Course
- PA state inspection categorie
Document information
- Uploaded on
- March 16, 2024
- Number of pages
- 4
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers
Subjects
-
pa state inspection categories test stuvia
-
pa state inspection categories test questions an
-
how should suspension components be maintained a
Also available in package deal