Woodshop Exam Questions with Correct Answers

Woodshop Exam Questions with Correct Answers The table saw - Answer-- size is determined by the maximum diameter of saw blade that can be safely used on the saw - may be called a circular saw or bench saw - can be used to make a variety of cuts Which of the following statements regarding the safety guard on a table saw is not true - Answer-The safety guard allows you to safely reach over the saw while it is cutting Before turning on the power to the table saw - Answer-- make sure the blade is sharp and the teeth have set -be certain the tilted blade will clear the table, fence, guard, and miter gauge - raise the blade no more than 1/4" above the stock You should always keep you hands and fingers 4"-6" from the cutting path. True or False - Answer-True A crosscut blade has teeth that - Answer-look and cut like a series of knives The rip blade is used for cutting along the grain of the wood. True or false - AnswerTrue A combination blade many be hollow ground, making the blade thinner near the teeth. True or false - Answer-False Ripping stock with a combination blade tends to overheat the blade due to insufficient clearance. True or false - Answer-True which of the following statements regarding changing blades on a saw table is not true - Answer-You should install the blade with the teeth pointing away from the stock and operator when in operation Crosscutting means the cutting is done across the grain or width of the board. True or False - Answer-True Both softwood and hardwood lumber are available in standard widths and lengths True or False - Answer-False An accessory that is helpful when ripping long stock is a(n) - Answer-outfeed stand A(n) ____________ is angled cut along an edge of a board - Answer-bevel