Woodshop Final Test Questions and Answers All Correct
Woodshop Final Test Questions and Answers All Correct You should wear safety glasses in the shop when. . . - Answer-doing any work that may endanger your eyes the margin of safety for a jointer - Answer-4 inches In general, the _____ should control the machine while in operation. - Answer-operator A clicking noise on a band saw indicates a. . . - Answer-crack in the blade The min. distance your hands should ever come to the cutting tool while in operation is called the. . . - Answer-margin of safety 3 types of safety devices: - Answer-push stick, push block, feather board safety rule for jointer #1 - Answer-before turning on the machine, make adjustments for the depth of cut and position of fence safety rule for jointer #2 - Answer-stock must be at least 12 inches long safety rule for jointer #3 - Answer-feed the work so the knives will cut with the grain When using table saw, the position of the stock must be controlled by the fence or the. . . - Answer-miter gauge safety rule for radial arm saw #1 - Answer-stock must be held firmly on the table against the fence safety rule for radial arm saw #2 - Answer-secure approval from your instructor before making ripping cuts safety rule for radial arm saw #3 - Answer-wear safety glasses when operating drill press: holes over ____ inches in diameter should be bored at slowest speed - Answer-1/2
Document information
- Uploaded on
- March 14, 2024
- Number of pages
- 4
- Written in
- 2023/2024
- Type
- Exam (elaborations)
- Contains
- Questions & answers
