PA Safety Inspection with question and answer

ASME Code - correct answer The American Society of Mechanical Engineers Boiler and Pressure Vessel Code ASTM - correct answer The American Society for Testing and Materials; Crash Dummies Acute Area of the Windshield - correct answer The center of the critical area on the driver's side of the vehicle directly in the driver's normal line of vision; 8 1/2 inches wide and 5 1/2 inches high; changes with height of driver Allowable Working Pressure - correct answer The pounds per square inch for which the container was constructed, or if conditions have changed, the maximum pressure at specified temperatures permitted at the most recent inspection by a certified inspector; usually deals with CNG Alteration - correct answer A change in the construction, design, or installation of a container that affects the strength or safety of the system; must be of equal or greater strength as the original Auxiliary Driving Lamp - correct answer A lighting device mounted to provide illumination in front of the vehicle and to supplement the upper beam of a standard headlamp system; it is not intended for use alone or with the lower beam of a standard headlamp system Back-Up Lamp - correct answer A lamp used to provide illumination behind the vehicle and to provide a warning signal when the vehicle is in reverse gear Bead - correct answer The part of the tire made of steel wires wrapper or reinforced by ply cords, that is shaped to fit the rim Belt - correct answer A layer made of fabric or other material located under the tread area CGA - correct answer The Compressed Gas Association Cargo Lamp - correct answer A lamp mounted on a multipurpose passenger vehicle, truck or bus that provides illumination to load or unload cargo