Becc Test 1 Updated Questions And Answers 2024/2025

BECC TEST 1 UPDATED QUESTIONS AND ANSWERS 2024/2025 Which of the following describes the contents of 200 series part of the PQS? The components and component parts of a system Who is responsible for maintaining the list of qualified signers for a personnel qualification standard? Unit coordinator Who is responsible for ensuring service record entires are done for completed personnel qualification system? DIVO What program trains for watches or duties necessary for the safe operation of a ship? PQS Which of the following serve as the central point of contact for all PQS documentation matters? Unit coordinator What type of protective eyewear is required when handling fuels? Non-vented chemical goggles What would not provide a secure breathing environment in hoods or helmets? Rips, tears, seam integrity Double hearing protection must be worn by all personnel when sound pressure equal to or greater than ______ continues 96dBA What can impede proper airflow in inhalation and exhalation valves? Foreign materials What kind of gloves should always be worn when welding or handling sharp objects? Leather What is the first thing sailors must assess when identifying the appropriate head protection? The hazards associated with the task What is the EEBD used for? Egress and emergency What type of tool is used to measure the width of narrow slots? Feeler gauges Why might you use an impact wrench instead of a socket wrench? To remove a fastener more quickly or forcefully What must be done prior to connecting an electrical tool to a power source? Ensure the power switch is off. What must be done prior to checking out a calibrated tool? Inspect calibration sticker Who will the maintenance person notify if there is a step on a MRC that they do not fully understand? WCS Which of the following provides a detailed procedure for performing preventative measure? MRC The syscom control number assigned for each maintenance requirement listed in a maintenance index page must match the number on the corresponding- MRC Which of the following documents is a detailed procedure to follow to execute preventative maintenance? MRC Which of the following inactive equipment maintenance periodicity codes is used to ensure equipment is suitable for operation when reactivating? Start up maintenance TRUE OR FALSE: The PMS schedule is used to verify that the MRC is up to date. FALSE What is the maintenance that identifies and corrects potential problems before equipment becomes inoperable? Preventative maintenance Who can authorize changes made to a work centers quarterly PMS schedule? DIVO The MRC syscom control number on the MRC must match the syscom control number on the? MIP The maintenance procedure steps on the MRC are? To be followed precisely What is used to indicate a step in a work procedure that must be performed correctly the first time and requires? Critical quality control points (Q-points) Which form is used to authorize the start of work on all ship systems and equipment by activities other than ships? Work authorization form (WAF) When equipment operation is prohibited a ____ tag is used. Red Danger When should an out of calibration (CAL) label be used? When an instrument error is small and consistent What is done every two weeks to ensure that all issued tags are hanging and are in the correct position and condition? Tag-out audit When a personnel hazard is involved, a ______ is used. Danger tag Who will determine whether or not the commanding officers permission is required for a tag out? Authorizing officer (AO) TRUE OR FALSE: A caution tag allows operation of an item as long as the special instruments are understood. TRUE Who can authorize removal of tags and labels? Authorizing Officer TRUE OR FALSE: The second person signing the tags may accompany the person attaching the tags. FALSE Which of the following technical publications provides technical instruction that ensures maintenance is planned, executed, completed, and documented within all fleet commands? JFMM (Joint Fleet Maintenance Manual) What is a material or substance that may pose a substantial hazard to human health or the environment called? Hazardous material (HAZMAT) Which organization or agency produces safety data sheets (SDS)? The chemical manufacturer and distributor Who must review and initial heat stress surveys that reduce personnel stay times? The CO TRUE OR FALSE: To ensure you get an accurate dry bulb reading from the WBGT meter hold it so that the ventilation is blowing on it. FALSE What basic instrument measures air moisture contents? Wet bulb thermometer If you think your fellow sailor is experiencing heat stroke, you should ____________? Notify your supervisor and get the sailor to medical The PQS progress chart is reviewed ____ by ________? Weekly, division officer Who is responsible for monitoring the PQS program through the PQS coordinator? XO If any doubt exists about the condition of any power tool, you should notify and show it to your _______? Supervisor The 3M coordinator is required to perform ______ command weekly spot checks. 5 What is the purpose of the PQS? It is the minimum standardized path for getting qualifications The 100 Series covers? Fundamentals, terms and definitions The 200 series covers? Systems What does 3M stand for? Maintenance material management Who runs the engineering department? Chief of engineering What is MDS used for? Getting support for things we find in the PMS Where is LOEP, MIP and MRC located? In 43P1 work center PMS manual What is the periodicity code for required maintenance? R What form is the 4790/2K? 2 kilo, job (MDS) How many sections are on the SDS? 16 Small containers must contain what information? Material name, manufacturer name, national stock number Heat stress is? Heat that stresses the body caused by thermal radiation, humidity, airflow and workload What is the body's optimal temperature? 97-99 degrees Fahrenheit How often are MRCs updated? Every 10 years Who informs sailors about the PHEL curve? The chief engineer What is HAZMINCEN? Hazardous Material Minimization Center Which section of the PQS is your actual qualifications? The 300 series Which section of the PQS can you find your prerequisites? The 300 series How many EEBDs are on a ship? 150% per crew When do we PMS on EEBDs? Every two years What are the three types of respirators? Air purifying, supplied air, and atmosphere supplying respirator What protects your eyes from flying debris? Safety glasses How often do we get audiograms? Annually, every year When do you need double hearing protection? When it is more than 96dBA When do you need single hearing protection? When it is 85dBA but less than 96dBA What is an STS? STS is significant threshold shift at 10dB or more What are the three types of hearing protection? Earplugs, headband ear cups, and circumaural muffs What tool is used to measure the degree of tightness of fasteners? Torque wrench Who is in charge of engineering while at sea? EOOW Who is in charge of engineering while at port? EDO What document describes everything for QA? The joint fleet maintenance manual What are 3 kinds of technical work documents? MP, FWP, and CWP What does QA ensure? First time quality What document tells you everything you need to know about tagging-out? TUMS What are the two types of tags? Yellow caution tag and red danger tag What is the purpose of tagging-out? To secure a piece of equipment for the safety of sailors and to do maintenance on the equipment Who do you report missing tags to? The AO What code is used for non-timed based requirements? RA What is a LOEP? The index pages to find a certain MIP What is an MIP? Maintenance index page What is an MRC? Maintenance requirement card. It is one way to maintain one piece of equipment What if preventive maintenance? Maintenance that prevents and gives the ship longevity Who is responsible for ensuring PMS is done? The commanding officer Who manages the 43P1? WCS What 2 sections is 3M divided into? PMS and MDS Who do you ask questions about maintenance? WCS Who is the 3M manager? Executive Officer (XO) How do you verify an MRC? MRCs are verified in MIP, and MIP is verified in LOEP Where does the DIVO record PQS qualifications? Service record What does the CO do in PQS? Establishes the PQS organization, assigns a unit coordinator, authorizes PQS modification What does the XO do in PQS? Acts as the overall training supervisor What does the DH do in PQS? Designates PQS qualifiers, supervises the execution of PQS What does the DIVO do in PQS? Acts with LCPO and assigns divisional watchstations, they make recommendations to the DH for personnel to act as qualifiers. What does the LCPO do in PQS? Assist the DIVO What does the WCS do in PQS? Assisting qualifiers as required, assigns requirements What do qualifiers do in PQS? Maintain PQS integrity, notify the supervisor of changes, and make time for sign-offs Who maintains the list of qualified signers? The unit coordinator Who is responsible for ensuring that an effective sight conservation program is established? The CO Who is responsible for ensuring that eyewash stations receive PMS checks? The DH Who is responsible for ensuring that areas identified as eye-hazardous are properly marked and labeled? The DIVO 5 inch micro meters will measure objects that are? 4-5 inches thick Where can you find the requirements to combat hazardous material spills? In the MSDS What must you wear when handholds and good porting is not available to stop a fall? A safety harness or dyna-brake What degree burn causes tingling? 1st degree burn When is it not safe to operate electric power tools? When flammable gasses are near What do torque wrenches measure? Feet, inches, and pounds The effective use of available manpower and material resources is the objective of? The 3M system