Oregon Tattoo License Questions & Answers Solved 100% Correct!!

Oregon Tattoo License Questions & Answers Solved 100% Correct!! can a mobile facility be in motion while performing services never when the armature bar is flat on the front coil what is the smallest gap above the rear coil? .10 what does a smaller gap above the rear coil cause? more power what should armature bars be made of? plain steel how does the machine run if too much of the coil core is showing? hot what type of edges should your contact screw have? rounded and smooth where in on the front spring should the contact screw be hitting? front or end of spring what length of spring would run faster short spring with a high angle what type of metal should the contact screw be made of to have the highest conductivity brass how does the armature bar hit the front coil core flat full contact what do you want the frame on your tattoo machine to be? nonconductive what happens when your machine is conductive or electrified it stays on with the armature bar sticking to the coils what diameter should your binding post be 5/16ths what happens if u use a steel contact screw? can cause sparks when setting up your machine why would you snug down the eye of the needle bar prevent weak jumpy lines why is a one piece contact screw the best choice adding things can cause vibration what are two advantages of a brass contact screw 100% conductive and it keeps it shape for longer than other metals how much if the contact screw needs to be touching the front spring ? tiny contact area why don't you use a coated spring coating wears away and causes a bad connection what kind of reaction do you expect from a machine with a very low spring angle? weak and spongey which type of machine benefits best from a shorter spring? liner which spring is most important for tuning the machine rear a machine is hard hitting and fast running moves the needle in and out of the skin so fast that not enough pigment is left behind what is the ideal width of the springs used on the machine springs should be equally as wide as what they are attached to what types of screws should you use to hold coils to the frame a flush magnetic screw tube vise function is to firmly hold the tube in place and properly align the tube while the machine is in use how should a tube vise hold a tube in comparison to the machine front to back and side to side what is the most important part of the tattoo machine coils what is the coils purpose to run consistently and not loose power what is a possible reason for the machine to not work at all debris between contact screw and front spring what can cause coils to get stuck in the on position cool wire, soldering lug, any electrical circuit touching frame what does your frame act as for the coil ground what is the purpose of the binding posts electrical contact from lugs to contact screw what is a safety feature of cartridge needles when not installed the needles are not exposed preventing needlestick EPA Environmental Protection Agency FDA Food and Drug Administration high level disinfectant is chemical agent registered with the epa that is tuberculocidal office in tattoo law refers to health licensing office what makes something a sharps container puncture resistant, leak proof, labeled with biohazard sticker how many hours are part of the tattoo licensing program 360 total 210theory 150practical what does a completed procedure mean? a tattoo on a live human finished including touch ups and the client is released how long is a tattoo license active for 1 year documents needed to apply for your tattoo license application, bbp, cpr, 2 IDs, high school diploma, training from approved tattoo program How long is a Temporary license valid? no more than 30 consecutive calendar days how many temporary licenses can u have in a year 2 how often to renew license once a year a license can be inactive for how long before it's expired 3 years how many hours of continuing education do u have to complete in a year 10 hrs how many can be self study 5 years cpr bbp and first aid count as continuing education when never how many hours of continuing Ed can be carried for ward to next renewal 8hours how long do u have to submit proof of continuing Ed if u get an audit? 30 days from issuance in what instance can u use expired ink never where must u get ur ink dyes or pigments commercial supplier if not using disposable stencils how do u clean actetate stencil clean rinse and immerse in high level disinfectant prior to beginning the procedure a client's skin must be thoroughly cleaned with what kind of chemical antiseptic once a procedure is complete what must be used to clean the skin a single use paper product saturated with an antiseptic solution what must be used to cover the tattoo once the procedure is complete a clean absorbent material or bandage intended to cover wounds to prevent spread of blood or other potentially infectious materials when can u tattoo a minor with physicians note for a medical procedure like scar camo when can u tattoo someone with signs of inebriation never when can u tattoo someone with a sunburn if u are not tattooing the sunburned area if there is not physicians statement when can u tattoo a minor never when can a tattoo artist remove a tattoo only if they are licensed in the appropriate removal field who is responsible for mainting the equipment in the facility anyone who uses it