Elevator Mechanic Test -
Section 2/ Updated/51
Questions with Complete
Answers/100% Accurate
In a modernization they plan on moving the controller 30 feet away
which ends up resulting in a voltage drop. What do you do? A) Call
electric company for a step-up transformer, B) Use a bigger wire. - -B)
Use a bigger wire.
-Governor trips at 115% of rated speed, the over speed switch trips at
90% of the 115%. - -
-If you are cutting something with a power saw, which way does piece
you are cutting face. Up or down? - -Down.
-They give you a voltage of 480 on primary and 216 on secondary and
a current. What transformer would you need to order? 1KVA 1to1, 2KVA
2to1, or 3KVA 2to1? - -2KVA 2to1
-You have 15 full 16lob rails, and two 8' sections. How much do they
weigh? - -
-Static load test - car drifts down 15 inches in ten minutes with no
noticeable oil leak. Where is the most likely leak? - -Underground
-You need to reset the step level switch on an escalator. Where is it
located? A) top B) bottom C) Both. - -C) Both
-What is needed for a false platform? - -False cars require spring-loaded
safeties held in locked position and barricades and netting on top, 600-
pound capacity. A working platform requires the governor to be
installed, and to be counterbalanced correctly.
-3 cars, 12 floors. 3 floors do not get PIs. How many PIs do you order? -
-27 PIs.
-The should you a call button wirting diagram with 3 floors, up and
down with a common and ground wire. How many wires are needed to
wire it? - -No answer noted.
-Where would you look for how many fixtures you need for a job? - -
Abstract
-PI goes out too fast at 2nd floor, what contacts are problem on print? -
-
Section 2/ Updated/51
Questions with Complete
Answers/100% Accurate
In a modernization they plan on moving the controller 30 feet away
which ends up resulting in a voltage drop. What do you do? A) Call
electric company for a step-up transformer, B) Use a bigger wire. - -B)
Use a bigger wire.
-Governor trips at 115% of rated speed, the over speed switch trips at
90% of the 115%. - -
-If you are cutting something with a power saw, which way does piece
you are cutting face. Up or down? - -Down.
-They give you a voltage of 480 on primary and 216 on secondary and
a current. What transformer would you need to order? 1KVA 1to1, 2KVA
2to1, or 3KVA 2to1? - -2KVA 2to1
-You have 15 full 16lob rails, and two 8' sections. How much do they
weigh? - -
-Static load test - car drifts down 15 inches in ten minutes with no
noticeable oil leak. Where is the most likely leak? - -Underground
-You need to reset the step level switch on an escalator. Where is it
located? A) top B) bottom C) Both. - -C) Both
-What is needed for a false platform? - -False cars require spring-loaded
safeties held in locked position and barricades and netting on top, 600-
pound capacity. A working platform requires the governor to be
installed, and to be counterbalanced correctly.
-3 cars, 12 floors. 3 floors do not get PIs. How many PIs do you order? -
-27 PIs.
-The should you a call button wirting diagram with 3 floors, up and
down with a common and ground wire. How many wires are needed to
wire it? - -No answer noted.
-Where would you look for how many fixtures you need for a job? - -
Abstract
-PI goes out too fast at 2nd floor, what contacts are problem on print? -
-
