Dante Network FAQ Latest Update with Verified Solutions

Dante Network FAQ Latest Update with Verified Solutions Does Dante require special network cabling? Regular CAT5E or CAT6 Ethernet cable is recommended Dante uses standard switches? Yes. Which is the 1st step to creating a subscription in Dante Controller? Open the transmitter and receiver to expose channels of each Which is the 2nd step to creating a subscription in Dante Controller? Click at the intersection of the two channels you wish to connect Which is the 3rd step to creating a subscription in Dante Controller? Wait for green check mark to appear Dante works best with *megabit* switches? No, gigabits switches As sample rate is increased on a device, what other property is usually changed? Channel count is reduced If Dante Controller is quit while audio is owing on a Dante network, what happens? Nothing. Dante Controller is not required to be present for a Dante network to work. If a network is only used for Dante and has only one network switch, then: The network does not require a managed switch Is there any advantage to using automatic IP addressing on a Dante network? Yes. Automatic addressing ensures that devices create a working LAN. Does Dante support MIDI? No. Dante only transports audio data, and does not interfere with MIDI. The names of devices and channels in Dante are: User-definable and remembered by devices. The sample rate of an audio system dictates: The highest audio frequency that the system can handle The bit depth of an audio system dictates: The amplitude resolution of each sample What is meant by a "stand alone" Dante network? One that is not connected to the internet or to other networks Which