Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 4 out of 46 pages
Exam (elaborations)

TCFP Firefighter I and II Test Questions and Answers Latest 2024 (GRADED)

Document preview thumbnail
Preview 4 out of 46 pages

TCFP Firefighter I and II Test Questions and Answers Latest 2024 (GRADED) A duck-billed lock breaker is used to: Select one: A. force casement and double-hung windows. B. displace automotive door locks. C. displace a lock cylinder. D. open a padlock. - D. open a padlock. How are jalousie windows normally opened and closed? Select one: A. Turning a small hand-crank B. Sliding the sash within the frame C. Using a remote-operated electric motor D. Pulling the chain attached to the drum - A. Turning a small hand-crank How much damage is caused by forcing the locks on double-hung windows? Select one: A. Minor B. Extensive C. Moderate D. None Feedback - B. Extensive What is one of the two styles of wood door frames? Select one: A. Rabbit B. Finger-joint C. Ledge D. Barn - A. Rabbit What is the quickest way to force entry through a security roll-up door? Select one: A. Cut the latch bar with a rotary saw B. Pry upward from the bottom of the door TCFP Firefighter I/II Chapters 10-13 Test Questions & Answers (VERIFIED) C. Cut the door with a power saw D. Pry the latch bar away from the keeper - C. Cut the door with a power saw What is the term for the transparent part of a window? Select one: A. Glass B. Lens C. Glazing D. Light - C. Glazing Which is one of the three types of wood swinging doors? Select one: A. Panel B. Stopped C. Gibb D. Tambour - A. Panel Which method should be considered first when forcing an outward-swinging door? Select one: A. Driving the cylinder through the door B. Cutting the bolt with a rotary saw C. Using the irons to pry it open D. Removing the hinge pins - D. Removing the hinge pins Which tool is designed specifically to remove a lock cylinder? Select one: A. Pry axe B. J tool C. K tool D. Hux bar - C. K tool Which tool is specifically designed to open double doors equipped with panic bars? Select one: A. Slim Jim B. Bar fly C. J tool D. Key tool - C. J tool Breaching of which type of wall is most likely to result in structural collapse? Select one: A. Bearing B. Sleeper C. Partition D. Exterior - A. Bearing For forcible entry, who usually determines the point of entry? Select one: A. Chief officer B. Incident commander C. Fire fighter D. Company officer - D. Company officer How does the rabbit tool work? Select one: A. It spreads the door from the frame B. It shears the hinges C. It displaces the lock cylinder D. It cuts the latch or bolt - A. It spreads the door from the frame Tempered glass is about __________ as strong as regular glass. Select one: A. twice B. four times C. equally D. half - B. four times The K tool is used in combination with: Select one: A. a pick-head axe. B. a strap wrench. C. vise-grips. D. a pry bar. - D. a pry bar. To force an inward-opening door, which part of the Halligan bar is inserted between the door and the jamb? Select one: A. Pick B. Fork C. Adze D. Blade - C. Adze Tool failure and possibly injury could result from attempting to cut __________ with ordinary cutting tools. Select one: A. case-hardened steel B. proof coil C. braided wire D. masonry - A. case-hardened steel What is the function of a J tool? Select one: A. Operate panic hardware on double-swinging doors B. Pull a lock cylinder out of a door C. Turn the lock mechanism after the cylinder has been pulled D. Open locked car doors - A. Operate panic hardware on double-swinging doors What is the minimum acceptable level of protective equipment when conducting forcible entry during fire suppression operations? Select one: A. Full structural firefighting PPE B. Helmet, coat, and gloves C. Helmet and eye protection D. Gloves and eye protection - A. Full structural firefighting PPE What is the term for a small opening that allows better tool access in forcible entry? Select one: A. Bite B. Anchor point C. Toe hold D. Purchase point - D. Purchase point What is the U-shaped part of a padlock that locks into the padlock body? Select one: A. Tongue B. Bow C. Shackle D. Latch - C. Shackle What must be done prior to making forcible entry into a fire building? Select one: A. Ventilation must be established B. The fire attack team must be ready C. Utilities must be controlled D. An "all clear" must be declared - B. The fire attack team must be ready What should be done after a self-closing door is forced? Select one: A. Cut the actuation cable B. Return the door to the closed position C. Allow the mechanism to resume its normal operation D. Chock the door in the open position - D. Chock the door in the open position When forcible entry is used, what should fire fighters do before leaving the scene? Select one: A. Take steps to secure the building B. Photograph and document the damage C. Bring the matter to the attention of law enforcement personnel D. Make the occupant aware of the unsecured openings - A. Take steps to secure the building Where are the hinges placed on a casement window? Select one: A. Top B. Side C. Bottom D. Middle - B. Side Where should a fire fighter stand when breaking windows? Select one: A. Leeward side of the window with the hands below the break B. Windward side of the window with the hands above the break C. Windward side of the window with the hands below the break D. Leeward side of the window with the hands above the break - B. Windward side of the window with the hands above the break Which action should fire fighters perform first before forcing a door? Select one: A. Check for the presence of a dead-bolt B. Sound the surrounding wall C. Gap the door D. Look for a window in or adjacent to the door - D. Look for a window in or adjacent to the door Which circular saw blade is susceptible to damage from gasoline vapors? Select one: A. Masonry B. Wood C. All blades D. Polycarbonate - A. Masonry Which hazard should be of particular concern to fire fighters who are carrying long tools? Select one: A. Tight turns in corridors B. Windows C. Self-closing doors D. Overhead wires - D. Overhead wires Which is a type of wood door frame? Select one: A. Dadoed B. Jointed C. Stopped D. Stiled - C. Stopped Which is one of the four major categories of door locks? Select one: A. Recessed B. Cylindrical C. Dead-bolt D. Tumbler - B. Cylindrical


Document information

Uploaded on
January 16, 2024
Number of pages
46
Written in
2023/2024
Type
Exam (elaborations)
Contains
Questions & answers
$18.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
STUDYROOM2026
3.5
(64)
Sold
412
Followers
212
Items
3879
Last sold
1 month ago




Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions

Whoops! We can’t load your doc right now. Try again or contact support.