Vivint Smart Home Pro Final Exam Questions and Answers 2024

12-24v - correct answerWhat is the input voltage range of the Doorbell Cam? 16.5 VAC - correct answerWhat is the output voltage of the transformer used to power the SkyControl panel? true - correct answerTrue or False: When programming a sensor into the sky panel you can type in the serial number or "learn" it in by triggering the device 2 - correct answerWhen programming a DW21, which loop number is used? 1 2 3 beans and wire caps - correct answerWhich of the following materials can you use to group multiple ground terminals in a takeover module: Solder String Wire Caps Duct Tape Beans True - correct answerT or F: When installing the firefighter, it is required to test the customer's existing smoke detectors 3/4" - correct answerWhen installing a DW21, what size bit should you use to drill the hole for the sensor? 1/2" 3/8" 3/4" 1" True - correct answerT or F: When installing the TAKE-345, you must ensure that the transformer is supplying power to the power supply before the battery. True - correct answerT or F: You are required to test signals from all secondary keypads and key fobs even though they are not detection devices False - correct answerT or F: When running power to the TAKE-345 polarity does not apply - correct answerWhat is the correct height at which to install the PIR2? 7 ft At least 5 ft At least 7 ft At 7.5 ft How would you program a CO3 if mounted on a hallway wall? Loop 1 Zone 8 Loop 1 Zone 14 Loop 3 Zone 4 Loop 1 Zone 4 - correct answer When installing a DW21 into a metal door frame, with a wooden door, what should you be sure to use? Metal Drill bit A DW11 should be used on all metal door frames