Becc Mod 2 Questions with correct Answers 2023 LATEST UPDATES.

Becc Mod 2 Questions with correct Answers 2023 LATEST UPDATES. What is gauge pressure plus atmospheric pressure? - answer-Pounds per square inch absolute (PSIA) What is atmospheric pressure at sea level? - answer-14.7 PSIA What does a differential gauge measure? - answer-Difference between 2 separate points. Known as PSID What does a duplex gauge measure? - answer-Measures and displays pressure readings simultaneously from 2 points What does a vacuum gauge measure? - answer-Measure pressure lower than atmospheric pressure What does a compound gauge measure? - answer-Measures both above and below atmospheric pressure What does a simplex gauge measure? - answer-Measures pressure from 1 location Which gauge is constructed of 2 Bourdon Tubes and 1 needle? - answer-Differential gauge Which gauge is constructed of 2 Bourdon Tubes and 2 needles? - answer-Duplex gauge What is a vacuum gauge measured in? - answer-Inches of water or inches of Mercury (InHg) What measuring device uses 2 dissimilar metals? - answer-Bimetallic expansion Which thermometer is also known as a distant reading thermometer? - answer-Filled system thermometer What does a filled system thermometer consists of? - answer-A hollow metal sensing bulb at one end of a small bore tube. The other end is connected to a Bourdon tube What is the oldest, simplest, most widely used thermometer? - answer-Liquid-in-glass thermometer What thermometer is used to measure temperatures between 300 degrees and 3000 degrees - answer-Pyrometer What are 3 types of direct liquid level indicators? - answer-Sounding tape, sounding rule, sight glass What does a sounding tape consists of? - answer-Measuring tape attached to and wound to a drum with a non- sparking plumb bob on the end What is the most commonly used sensor by the Navy? - answer-Magnetic float type What is the main type of Indirect Reading Device that you will see for measuring liquid levels? - answer-Tank Level Indicator What are the 3 major components of the magnetic float type? - answer-Fluid level detection device, Receiver device, Remote level indicator What are the 2 legal records maintained by the engineering department? - answerEngineering Log and Bell Book/Log How long are legal documents kept onboard ship? - answer-3 years What is the daily log that records which equipment is in operation, casualties to equipment or personnel, and any general information that affects the engineering plant? - answer-The engineering Log Where are speed changes recorded? - answer-The bell book Which report contains lists of liquids onboard such as fuels, lubricating oil and fresh water? - answer-The fuel and water report What log shows the existing material conditions for readiness and is maintained in Damage Control Central? - answer-Damage Control Closure log Which record provides information about unusual maintenance problems and ensures that service calls are handled properly? - answer-The Trouble Call record What is included in the trouble call record? - answer-Time received, nature of problem, who is assigned to correct the problem and time completed How long is the operating log kept onboard? - answer-6 months What do you do when readings indicate abnormal operations? - answer-Readings must be circled in red and reported to the watch supervisor, and an annotation made in the remarks section. The circle and annotation must both be in red What is the purpose of the Physical Security Program? - answer-To safeguard the ship and ship's company from sabotage Who does ultimate responsibility for physical security lie with? - answer-Commanding Officer Which device is a positive stop designed to prevent inadvertent manipulation? - answerA locking device What is a specially constructed key that allows complete disassembly of a security lock? - answer-Control key What is a standard key used by watch standers and maintenance personnel? - answerOperator key Who has the only keys to the key locker? - answer-Key issue control custodian, Engineering duty officer, and the Engineering officer Who must any breach of security procedures be reported to? - answer-The Engineering officer Who can approve the resumption of normal operations? - answer-Engineer officer, CDO, or CO Who is responsible for physical security of the ship and takes direct control of security forces in the event of a security alert? - answer-CDO In-port, represents the CO, and reports to the CDO - answer-OOD Who controls access to the ship and receives hourly reports from the sounding and security watch? - answer-OOD In cases involving fire or flooding, what information do you state? - answer-Type of casualty, location, compartment noun name, your name, rate/rank and telephone number What is the purpose of the EOSS? - answer-Provides safe, accurate and standardized procedures tailored to each ship What does EOSS stand for? - answer-Engineering Operational Sequencing System The use of the EOSS is? - answer-Mandatory Changes in the EOSS must be authorized by? - answer-CO What are the 3 parts of the EOSS? - answer-User Guide, Engineering Operational Procedures(EOP), Engineering Operational Casualty Control(EOCC) Where is the EOSS located? - answer-In the Engineering Spaces. There is also a CDROM kept in the log room Master Plant Procedures are structured so that they are the overall controlling document used by? - answer-The EOOW What provides proper valve alignment for each combination of tanks, components, fuel stations, and systems that are used when accomplishing an evolution? - answer-Tank Table What provides tank capacities? - answer-Tank Status Diagrams The act of opening an electrical circuit breaker or switch at a power supply - answer-Deenergize The act of closing an electrical circuit breaker or switch at a power supply - answerEnergize The opening or shutting of valves in a piping system or the positioning of switches or controls in an electrical system to permit the required flow of fluids or current - answerAlign