TestOut LabSim 3.3.5 Practice Questions | Verified | Guaranteed Success Score: 100%

Question 1:  Correct You have just finished installing Windows 10 on a computer that will be the reference system. An image needs to be captured from this reference system. You will be deploying the image captured to computers that were made by several different manufacturers and which use a wide range of hardware. Therefore, you need to remove all devicespecific information from the reference system prior to capturing the image. Which tool should you use to do this? EXPLANATION The System Preparation Tool (SysPrep) is used to prepare an existing Windows installation for imaging by removing device-specific information. The Windows Configuration Designer is used to create provisioning packages that can be applied to image files or even to running systems. The Deployment Image Servicing and Management (DISM) command line tool is used to apply updates, drivers, and language packs to a Windows image. It can also be used to capture an image of a reference system or deploy it on a target system. The Deployment and Imaging Tools Environment provides a Command Prompt session that is preconfigured with all of the image management tools provided by the Windows ADK. REFERENCES LabSim for Client Pro, Section 8.4. Deployment Image Servicing and Management System Preparation Tool Deployment and Imaging Tools Environment Windows Configuration Designer6/10/2021 TestOut LabSim  Question 2:  Correct You have just finished installing Windows 10 on a reference system from which you need to capture an image. You've already removed device-specific information from the system and are ready to capture the image files. Which tools can you use to do this? EXPLANATION Deployment Image Servicing and Management (DISM) is a command line tool that can be used to capture an image of a reference system and deploy it on a target system. The System Preparation Tool (Sysprep) is used to prepare an existing Windows installation for imaging by removing device-specific information. The Deployment and Imaging Tools Environment provides a Command Prompt session that is preconfigured with all of the image management tools provided by the Windows ADK. The Windows Configuration Designer is used to create provisioning packages that can be applied to image files or even to running systems.