ASNT Level III Basic exam 2022/2023
Questions and Answers
SNT-TC-1A is not intended to be used as a strict specification. - ANSWER-Which of the
following statements is true concerning the usage of SNT-TC-1A?
Written and stated in general terms - ANSWER-The SNT-TC-1A Interpretation Panel will
respond to inquiries about SNT-TC-1A. The inquiry must be:
May engage an outside service but is, nevertheless, responsible for the certification of
the company's NDT personnel - ANSWER-With regard to the training of NDT personnel,
the employer:
To establish their own written practice that must be used as a strict specification. -
ANSWER-SNT-TC-1A is intended as a guideline for employers:
The employer should review the detailed recommendations and modify them as
necessary to meet its particular needs. - ANSWER-The following is a statement in SNT-
TC-1A "It is recognized that these guidelines may not be appropriate for certain
employers; circumstances and / or applications." What should be done if the guidelines
are not appropriate?
The individual's employer. - ANSWER-Who should be responsible to assess whether or
not an individual should be qualified and certified who does not perform NDT, but
monitors and evaluates NDT?
Holographic testing - ANSWER-To which of the following NDT methods is SNT-TC-1A
currently not applicable
With flexibility and reason - ANSWER-ASNT intended that the recommendations of
SNT-TC-1A be applied
The employer. - ANSWER-Of the following, which is most appropriate to determine the
needs to qualify and certify personnel whose only NDT function is to operate digital
thickness equipment.
Written testimony of qualification. - ANSWER-Certification is
It has been specified by the customer. - ANSWER-Use of SNT-TC-1A is mandatory
when:
Level I, II, III. - ANSWER-The basic levels of qualification recommended by SNT-TC-1A
are:
This study source was downloaded by 100000835004878 from CourseHero.com on 01-08-2023 01:49:26 GMT -06:00
https://www.coursehero.com/file/185714961/ASNT-Level-III-Basic-exam-2022docx/
, Weather any NDT personnel should be qualified and certified depends solely upon the
needs of the employer and the requirements of the employer's customers or clientele. -
ANSWER-Should personnel that operate ultrasonic digital thickness measurement
equipment to qualified and certified
The Trainee may not conduct nondestructive test independently and may not report test
results - ANSWER-According to the recommendations of SNT-TC-1A which of the
following is true concerning a Trainee's activities?
Must train and examine the Level I and II personnel in his or her organization. -
ANSWER-According to SNT-TC-1A, which of the following is not true for a Level III?
Specific calibrations, Specific nondestructive test, specific evaluations, and write reports
of test results. - ANSWER-According to written instructions, an NDT Level I may be
qualified to perform:
Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions
provided that they are in accordance with written instruction of a Level III or designee. -
ANSWER-May a Level I independently perform, evaluate and sign for results of
nondestructive test with supervision and guidance from a Level II or III?
The qualifications for Level III equal and exceed those of Level II. - ANSWER-Which of
the following statements is true concerning the definitions of Trainee, Level I, II and III in
SNT-TC-1A?
Establish techniques - ANSWER-Which of the following is not within the scope of
activities of a Level II individual, as recommended in SNT-TC-1A?
My conduct on the job training and guidance of Level I personnel. - ANSWER-A
recommended in SNT-TC-1A, a Level II:
The Level III shall be capable of evaluating test results in terms of codes standards and
specifications. - ANSWER-According SNT-TC-1A which of the following is true for a
Level III?
The employer. - ANSWER-In Accordance with SNT-TC-1A, who is responsible for
establishing a written practice for the control and administration of NDT personnel
training, examination and certification?
Should be described in the employer's written practice only if they are different form
SNT-TC-1A recommendations. - ANSWER-The responsibility of each level of
certification for determining the acceptability of materials or components:
This study source was downloaded by 100000835004878 from CourseHero.com on 01-08-2023 01:49:26 GMT -06:00
https://www.coursehero.com/file/185714961/ASNT-Level-III-Basic-exam-2022docx/
Questions and Answers
SNT-TC-1A is not intended to be used as a strict specification. - ANSWER-Which of the
following statements is true concerning the usage of SNT-TC-1A?
Written and stated in general terms - ANSWER-The SNT-TC-1A Interpretation Panel will
respond to inquiries about SNT-TC-1A. The inquiry must be:
May engage an outside service but is, nevertheless, responsible for the certification of
the company's NDT personnel - ANSWER-With regard to the training of NDT personnel,
the employer:
To establish their own written practice that must be used as a strict specification. -
ANSWER-SNT-TC-1A is intended as a guideline for employers:
The employer should review the detailed recommendations and modify them as
necessary to meet its particular needs. - ANSWER-The following is a statement in SNT-
TC-1A "It is recognized that these guidelines may not be appropriate for certain
employers; circumstances and / or applications." What should be done if the guidelines
are not appropriate?
The individual's employer. - ANSWER-Who should be responsible to assess whether or
not an individual should be qualified and certified who does not perform NDT, but
monitors and evaluates NDT?
Holographic testing - ANSWER-To which of the following NDT methods is SNT-TC-1A
currently not applicable
With flexibility and reason - ANSWER-ASNT intended that the recommendations of
SNT-TC-1A be applied
The employer. - ANSWER-Of the following, which is most appropriate to determine the
needs to qualify and certify personnel whose only NDT function is to operate digital
thickness equipment.
Written testimony of qualification. - ANSWER-Certification is
It has been specified by the customer. - ANSWER-Use of SNT-TC-1A is mandatory
when:
Level I, II, III. - ANSWER-The basic levels of qualification recommended by SNT-TC-1A
are:
This study source was downloaded by 100000835004878 from CourseHero.com on 01-08-2023 01:49:26 GMT -06:00
https://www.coursehero.com/file/185714961/ASNT-Level-III-Basic-exam-2022docx/
, Weather any NDT personnel should be qualified and certified depends solely upon the
needs of the employer and the requirements of the employer's customers or clientele. -
ANSWER-Should personnel that operate ultrasonic digital thickness measurement
equipment to qualified and certified
The Trainee may not conduct nondestructive test independently and may not report test
results - ANSWER-According to the recommendations of SNT-TC-1A which of the
following is true concerning a Trainee's activities?
Must train and examine the Level I and II personnel in his or her organization. -
ANSWER-According to SNT-TC-1A, which of the following is not true for a Level III?
Specific calibrations, Specific nondestructive test, specific evaluations, and write reports
of test results. - ANSWER-According to written instructions, an NDT Level I may be
qualified to perform:
Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions
provided that they are in accordance with written instruction of a Level III or designee. -
ANSWER-May a Level I independently perform, evaluate and sign for results of
nondestructive test with supervision and guidance from a Level II or III?
The qualifications for Level III equal and exceed those of Level II. - ANSWER-Which of
the following statements is true concerning the definitions of Trainee, Level I, II and III in
SNT-TC-1A?
Establish techniques - ANSWER-Which of the following is not within the scope of
activities of a Level II individual, as recommended in SNT-TC-1A?
My conduct on the job training and guidance of Level I personnel. - ANSWER-A
recommended in SNT-TC-1A, a Level II:
The Level III shall be capable of evaluating test results in terms of codes standards and
specifications. - ANSWER-According SNT-TC-1A which of the following is true for a
Level III?
The employer. - ANSWER-In Accordance with SNT-TC-1A, who is responsible for
establishing a written practice for the control and administration of NDT personnel
training, examination and certification?
Should be described in the employer's written practice only if they are different form
SNT-TC-1A recommendations. - ANSWER-The responsibility of each level of
certification for determining the acceptability of materials or components:
This study source was downloaded by 100000835004878 from CourseHero.com on 01-08-2023 01:49:26 GMT -06:00
https://www.coursehero.com/file/185714961/ASNT-Level-III-Basic-exam-2022docx/
