BICSI Installer 2 (Answered) With Complete Verified Solution 100%

BICSI Installer 2 (Answered) With Complete Verified Solution 100% 1 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: The decrease in magnitude or the power loss of a signal that propagates between points, expressed in decibels (dB) as the ratio of received signal to transmitted signal level. 2 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: A range of frequencies available for signaling expressed in hertz (Hz). It is used to denote the potential information handling capacity of the medium, device, or system. 3 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: The attenuation of a signal as it passes through an optical fiber cable medium. Cable loss is normally expressed in decibels (dB) and increases with frequency. 4 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: The outer concentric glass layer that surrounds the optical fiber core and has a lower index of refraction than the core. 5 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: A mechanical device used to provide a means for aligning, attaching, and achieving continuity between conductors or optical fibers. 6 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: 1. The loss of signal resulting from the scattering of light pulses as they are transmitted through a medium. 2. The widening or spreading out of the modes in light pulses as it progresses along an optical fiber. 3. The characteristics of the sound coverage field of a speaker. 7 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: The alignment sleeve portion of an optical connector used to protect and align the stripped optical fiber. 8 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: Abbreviation for fiber connector. The device used to hold and align one or more fibers in interface with another fiber or fibers (when not referring to the specific type of connector designated FC). 9 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: An assembly used to increase the effective outer diameter of strands within an optical fiber cable to enable connector termination, typically provided in with 6 or 12 strand configurations. Also called a fan out. 10 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: The signal loss resulting from the insertion of a component, or link, or channel, between a transmitter and receiver (often referred to as attenuation). 11 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: A small form factor (SFF) single fiber, optical fiber connector/adapter used for the termination of both multimode and single mode optical fiber cables. A two-fiber, duplex connector option is also available. The housing mechanism of the LC connector (simplex and duplex) is a push-pull type connection. 12 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: An optical waveguide that allows many bound modes to propagate. Typically used over short distances within buildings or on a campus. 13 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: An abbreviation for small form factor. Any of several physical compact optical fiber connector and adapter designs that have been developed for use in optical fiber systems. They are about half the size of conventional connectors and adapter. 14 KEY TERMS Choose Correct Term: 1. Attenuation, 2. Bandwidth, 3. Cable Loss, 4. Cladding, 5. Connector, 6. Dispersion, 7. Ferrule (Optical Fiber), 8. FC, 9. Furcating Harness, 10. Insertion Loss, 11. LC Connector/Adapter, 12. Multimode Optical Fiber, 13. SFF, 14. SC Definition: Abbreviation for subscriber connector. Optical fiber connector/adapter. 1 Optical Fiber Terminology Choose Correct Term: 1. EMI, 2. Bandwidth, 3. Analog Signal, 4. Bel, 5. Frequency, 6. Digital Signal, 7. TRansmission Definition: Abbreviation for electromagnetic interference. The unwanted coupling of electric and magnetic fields. 7 Optical Fiber Terminology Choose Correct Term: 1. EMI, 2. Bandwidth, 3. Analog Signal, 4. Bel, 5. Frequency, 6. Digital Signal, 7. TRansmission Definition: The movement of information by electromagnetic energy in the form of electrical or optical signals from one point to another through a transport medium. The three methods are Simplex, Half-Duplex, and Full Duplex. 6 Optical Fiber Terminology Choose Correct Term: 1. EMI, 2. Bandwidth, 3. Analog Signal, 4. Bel, 5. Frequency, 6. Digital Signal, 7. TRansmission Definition: Information used by digital devices in the form of a sequence of discrete pulses (e.g., a binary signal with two values used to transmit the two states [0,1]). 5 Optical Fiber Terminology Choose Correct Term: 1. EMI, 2. Bandwidth, 3. Analog Signal, 4. Bel, 5. Frequency, 6. Digital Signal, 7. TRansmission Definition: The number of cycles that a periodic signal completes in a given time. If the unit of time is one second, the frequency is stated in hertz (Hz). One Hz is equal to one cycle per second. 2 Optical Fiber Terminology Choose Correct Term: 1. EMI, 2. Bandwidth, 3. Analog Signal, 4. Bel, 5. Frequency, 6. Digital Signal, 7. TRansmission Definition: A range of frequencies available for signaling expressed in hertz(Hz). It is used to denote the potential information handling capacity of the medium, device, or system. 3 Optical Fiber Terminology Choose Correct Term: 1. EMI, 2. Bandwidth, 3. Analog Signal, 4. Bel, 5. Frequency, 6. Digital Signal, 7. TRansmission Definition: Signal in the form of a wave that uses continuous variations of a physical characteristic over time (e.g., voltage amplitude, frequency) to transmit information. 4 Optical Fiber Terminology Choose Correct Term: 1. EMI, 2. Bandwidth, 3. Analog Signal, 4. Bel, 5. Frequency, 6. Digital Signal, 7. TRansmission Definition: A logarithmic ratio of analog signal strengths, named in honor of telephone pioneer Alexander Graham Bell. A decibel is one-tenth of a bel. bogbswrbyvra Optical Fiber Color Codes List the first letter of the each of the 12 colors in a 12 strand in optical fiber cabling media. Example: Blue, Orange, Green would be "bog". List all twelve together for the answer. black Optical Fiber Color Codes The second 12 strands (13-24) of optical fiber cabling media has the same color code order as 1-12, but has the addition of a stripe. What color is the strip that is added? OF Interpret Cable Markings Choose from the correct marking: OF, N, C, P, R, G, LSZH, LSF Description: Optical Fiber N Interpret Cable Markings Choose from the correct marking: OF, N, C, P, R, G, LSZH, LSF