Spectrum FTT Weeks 1-3 Questions and Answers (Rated A+)

Your hard hat is intended to protect you from which of the following? - ANSWER-Impact, penetration, and electric shock Which standard is imprinted on glasses or goggles that meet safety requirements? - ANSWER-ANSI Standard Z87.1-2010 Which items of PPE do you need under normal working conditions (not climbing)? - ANSWER-Hard hat, safety glasses, safety vest, FVD, and gloves Which items of PPE would you need when working aloft on a ladder? - ANSWER-Hard hat, safety glasses, FVD, long-sleeved shirt, gloves, body belt, positioning strap, and lineman's boots What happens to leather when it is dried too fast in excessive heat? - ANSWER-The leather curls and cracks How do you measure for proper "D" size on a padded body belt? - ANSWER-Measure hipbone to hipbone plus 2" Once at the working height, pass the positioning strap around the pole and engage the single-sided end on the D-Ring with the mouth of the snap hook _____________. - ANSWER-Outward Always verify visually that the snap hook has engaged the __________________. - ANSWER-D-Ring You must document your monthly PPE inspection on the applicable inspection form. - ANSWER-True What type of safety vest is required? - ANSWER-Class 3 What is the minimum clearance of CATV cable from power at the pole? - ANSWER-40 inches What are the three indicators on the FVD? - ANSWER-10-step bar graph, audible tone, and power indicator LED To use the FVD, after the self-test process, continue to hold pressure on the power switch and move the FVD: - ANSWER-Toward the object you want to test To replace the battery of the FVD, use this tool to pry the cover off the back of the device: - ANSWER-Putty knife, coin or, small screwdriver The FVD is only a voltage detector and is not intended to be a precision measuring device. What other senses would you use as an additional safety check? - ANSWER-Sight, sound, and smell To determine if capacitive coupling is causing a hazardous voltage indication, you should provide a temporary path to __________ for your body to remove the voltage caused by the e-field of the power line. - ANSWER-Ground Indications of high current include - ANSWER-Charring or melting of wires, and smoke Metal buildings and mobile homes should normally indicate voltage is present when tested. - ANSWER-False How many times should you test a cyclic device, such as a traffic light support strand? - ANSWER-Three complete cycles