CR101B Introduction to Collision RepairExam With Complete Updated Solution()

CR101B Introduction to Collision Repair Exam With Complete Updated Solution(2023 -2024) Which of these warnings is shown in the symbol below? - answerFlammable The reason a safety cable is used on a pulling chain is to: - answerhelp reduce backlash if the chain comes loose. Why are a type of lineman's gloves recommended when working with high voltag e parts? - answerThey are electrically insulated. Which of these safety items is recommended when doing the process shown in the photo below? (Using a hammer & dolly) - answerSafety glasses Which of these warnings is shown in the symbol below? - answerPo ison Which of these is a safety issue when doing the process shown in the photo below? (Spot welding) - answerSparking from the welding process Which of these safety items is missing on the technician in the photo below? (Using angle grinder) - answerFul l-face shield Which of these safety items is missing on the technician in the photo below? (Wiping a car down with something) - answerProtective gloves Which of these sheathing colors is commonly used to designate high voltage wiring? - answerBright oran ge Which of these safety equipment items avoids flash burn when observing the task shown in the photo below? (welding) - answerWelding helmet Technician A says that employers are allowed to remove information from an SDS for use in the work place. Techni cian B says that employers should retain an SDS for 30 years after the product is no longer used. Who is right? - answerB only CR101B Introduction to Collision Repair Exam With Complete Updated Solution(2023 -2024) A carcinogen is a substance that causes: - answercancer Olfactory fatigue is when a person: - answercan no longer smell a chemical after exposure. A Class B fire extinguisher could be used on a: - answerburning solvent. Which of these can occur while welding on a panel that has a catalyzed clearcoat finish? - answerRelease of isocyanate vapors Hepatitis B is considered: - answera blood borne pathogen. Information on cleaning a hazardous material spill can be found in what section of an SDS? - answerAccidental Release Measures If a container does not have a label, a technician should: - answeravoid handling material until identified. Which of these should be worn when using a half - mask supplied -air respirator during refinishing? - answerGoggles A flammable material: - answercan easily catch fire and burn r apidly or explosively. The process being shown in the photo above is: (body filler) - answerapplying body filler. A supplement is a: - answerchange to the damage report. Which of these damage conditions is illustrated above? (Bend in frame rail) - answe rMash The imaginary plane shown in red in the illustration above is used to measure: (through center of vehicle - front to rear) - answerwidth