Firefighter 1 & 2 State Test OCTOMBER
2023/2024(Answered test)
What is the mission of the fire service? - ✔✔To save lives and protect property
What NFPA standard establishes basic training criteria for Firefighter I and Firefighter II
- ✔✔1001
A ____ is a collection of rules enacted by law in a particular jurisdiction. - ✔✔Code
Which of the following BEST describes the action first taken after an alert to the station?
- ✔✔Dispatching of emergency services responders
What task may a telecommunications center be assigned during a progress report? - ✔
✔Periodic time transmissions
Which of the following must be considered when deciding the size of a collapse zone? -
✔✔Type of building construction and safest location for personel
Which of the following best describes when SARS are used? - ✔✔Confined space
rescues and technical rescue incidents
Which of the following SCBA components warns when the system is reaching 20-25
percent of cylinder capacity? - ✔✔End of service time indicators
When donning SCBA, all straps on the harness assembly and facepiece should be - ✔
✔Fully extended
Which types of SCBA are tested every five years? - ✔✔Steel and aluminum
Which of the following types of rope is the only rope required to have a rope log? - ✔✔
Life safety rope
Which part of the rope is used to tie a knot or hitch? - ✔✔Working
Which type of knot can be used to secure a victim's hands or feet to drag the victim to
safety? - ✔✔Handcuff
Once a search is complete, a firefighter should - ✔✔Report promptly to the supervisor
, What are the two objectives for a structural search? - ✔✔Search for life; assess fire
conditions
In the acronym LUNAR, the A stands for - ✔✔Assignment
Which of the following best describes the result of running a generator for a long period
of time without a load? - ✔✔Will overheat and damage the generator.
Which rescue tool power source is typically powered by pumps? - ✔✔Hydraulic
What stabilizing tool uses a system of at least three wedged posts between the ground
and a vehicle resting on its side or top? - ✔✔Buttress tension system
Hybrid vehicles that use color coded wiring use ____ to mark high voltage wiring. - ✔✔
Orange
When using a strut and buttress tension system, firefighters must ensure all parts have
a safety margin that is: - ✔✔In excess of the weight being secured
What type of extrication method is used to stabilize a vehicle that is upside down or
lying on its side? - ✔✔Buttress tension system
What initial action is the next priority after stabilizing the scene? - ✔✔Stabilize the
victim
What type of structural collapse occurs when the floor and/or roof assemblies on both
sides of a load-bearing wall collapse, allowing a good chance of victim survival? - ✔✔
A-frame
In the OATH method of signaling on a search line, two tugs represents - ✔✔Advance
Which of the following is an example of a push/pull tool? - ✔✔Pike pole
Cutting edges on axes should be inspected for: - ✔✔Chips, cracks, or spurs
When caring for an unprotected metal surface, use a metal file to: - ✔✔Remove burrs
from a cutting edge
NFPA 1931 requires that single, roof combination and extension ladders must support a
maximum load of - ✔✔750 lbs
Ground ladders should be service tested before being placed in service, ____ while in
service, and after use that exposes the ladder to high heat or rough treatment. - ✔✔
Once each year
2023/2024(Answered test)
What is the mission of the fire service? - ✔✔To save lives and protect property
What NFPA standard establishes basic training criteria for Firefighter I and Firefighter II
- ✔✔1001
A ____ is a collection of rules enacted by law in a particular jurisdiction. - ✔✔Code
Which of the following BEST describes the action first taken after an alert to the station?
- ✔✔Dispatching of emergency services responders
What task may a telecommunications center be assigned during a progress report? - ✔
✔Periodic time transmissions
Which of the following must be considered when deciding the size of a collapse zone? -
✔✔Type of building construction and safest location for personel
Which of the following best describes when SARS are used? - ✔✔Confined space
rescues and technical rescue incidents
Which of the following SCBA components warns when the system is reaching 20-25
percent of cylinder capacity? - ✔✔End of service time indicators
When donning SCBA, all straps on the harness assembly and facepiece should be - ✔
✔Fully extended
Which types of SCBA are tested every five years? - ✔✔Steel and aluminum
Which of the following types of rope is the only rope required to have a rope log? - ✔✔
Life safety rope
Which part of the rope is used to tie a knot or hitch? - ✔✔Working
Which type of knot can be used to secure a victim's hands or feet to drag the victim to
safety? - ✔✔Handcuff
Once a search is complete, a firefighter should - ✔✔Report promptly to the supervisor
, What are the two objectives for a structural search? - ✔✔Search for life; assess fire
conditions
In the acronym LUNAR, the A stands for - ✔✔Assignment
Which of the following best describes the result of running a generator for a long period
of time without a load? - ✔✔Will overheat and damage the generator.
Which rescue tool power source is typically powered by pumps? - ✔✔Hydraulic
What stabilizing tool uses a system of at least three wedged posts between the ground
and a vehicle resting on its side or top? - ✔✔Buttress tension system
Hybrid vehicles that use color coded wiring use ____ to mark high voltage wiring. - ✔✔
Orange
When using a strut and buttress tension system, firefighters must ensure all parts have
a safety margin that is: - ✔✔In excess of the weight being secured
What type of extrication method is used to stabilize a vehicle that is upside down or
lying on its side? - ✔✔Buttress tension system
What initial action is the next priority after stabilizing the scene? - ✔✔Stabilize the
victim
What type of structural collapse occurs when the floor and/or roof assemblies on both
sides of a load-bearing wall collapse, allowing a good chance of victim survival? - ✔✔
A-frame
In the OATH method of signaling on a search line, two tugs represents - ✔✔Advance
Which of the following is an example of a push/pull tool? - ✔✔Pike pole
Cutting edges on axes should be inspected for: - ✔✔Chips, cracks, or spurs
When caring for an unprotected metal surface, use a metal file to: - ✔✔Remove burrs
from a cutting edge
NFPA 1931 requires that single, roof combination and extension ladders must support a
maximum load of - ✔✔750 lbs
Ground ladders should be service tested before being placed in service, ____ while in
service, and after use that exposes the ladder to high heat or rough treatment. - ✔✔
Once each year
