Basic Orientation Plus Questions and Answers(A+ Solution guide)

what is the most frequently cited OSHA violation ? - Fall Protection what are the key elements that are essential to recognizing hazards and reducing and/or eliminating workplace hazrds - 1.) management commitment and employee involvement 2.) hazard prevention and control 3.) worksite analysis 4.) safety and health training you are encouraged to ask your __________ for information whenever you have a problem or are in doubt about what to do on a job. - Supervisor it is your responsibility to follow all safety regulations, inform your employe r of any unsafe condition; report all injuries (no matter how minor they seem); and wear the proper personal protective equipment. T/F - True what is the OSHA standard that addresses the requirements for preventing and lessening the results of a bad release of toxic, reactive, flammable, or highly explosive hazardous chemicals from a process ? - Process Safety Management Standard The Process Hazard Analysis (PHA) is one of the most important parts of the PSM program. PHAs are used to identify and evaluate major processes and ensure they are: - 1.) Identified 2.) Evaluated 3.) Controlled In the PSM Standard, OSHA states employees must be trained if they work with highly hazardous chemicals . T/F - True facilities are not permitted to control your entrance and exit in covered process areas. T/F - FalseIf you are replacing a piece of equipment, the new one should be the same as the one being removed. If not, you should find out whether the change was on purpose. This is called ? - Management of Change which of the following should be your first concern when entering the work cite ? - Saftey Under the Stop Work Authority, you have the right and obligation to stop work activity if you have reason to believe your own safety or a co-workers safety is in jeopardy or if the work plan is not clearly established or understood. T/F - True