EPA Lead Inspector | 111 Questions with 100% correct Answers | verified

Lead-based paint (LBP) - Any varnish, shallac, or coating that contains either- 1.0 mg/cm2 - 0.5 % by weight - 5000 ppm - Older instruments could not read accurately at 0.7, so the lead standard was updated to 1.0 Dust sample clearance values - - Floors: 40 μg/ft2 10 μg/ft2 (10 μg/ft2 in NY) - Windows: 250 μg/ft2 100 μg/ft2 (50 μg/ft2 in NY) - Window wells (troughs): 400 μg/ft2 (100 μg/ft2 in NY) - Samples must be at 1 sq ft 2 sq ft (can be reduced to 1 sq ft if within 10 μg) EPA Soil Regulations - - 400 ppm for playgrounds/children's areas - 1200 ppm for rest of yard - There must be 9 sq ft of soil to classify with soil testing - At 5000 ppm, MUST remediate/abate (remove & replace, paving, or bioremediation) Lab sampling technique - - AAS (Atomic Absorption Spectrometry) - Sample is placed into a furnace and vaporized ... light is shone through to give a quantitative result XRF - - X-ray fluorescence - Utilizes radioactive isotopes (unstable material trying to reach stability) - Cobalt-57 (half-life of 9 months) and cadmium-109 (half-life of 15 months) are the two sources (where radiation originates) - Emits gamma rays but will read X-rays (backscatters) - Ionizing radiation from the removal of electrons due to interactions with radiation LBP Hazard - ANY condition that causes exposure to lead LBP inspection - a surface-by-surface investigation to determine the presence of lead CPSC - - Consumer Product Safety Commission - Set a lead paint standard: cannot contain 0.06% lead by weight ... updated to 0.009% - The commission banned lead-based paint in 1978 True/False: Dust sampling only done for hazard assessments - True; only risk assessors take samples to determine likelihood of coming into contact with contaminantsWhat kind of sampling must be done for inspections? - Random ... repeats must be annotated then you move onto the next