NCTI IV Ch: 8
When troubleshooting, why is it important to recreate a problem? Correct
Ans - All of the above.
Which of the following helps to determine local addressing information?
Correct Ans - ipconfig.
Which of the following commands shows the addresses configured on a
Microsoft PC? Correct Ans - ipconfig.
Which TCP/IP tool allows you to display a workstation's network
configuration values? Correct Ans - ipconfig.
Typing ipconfig in the Windows command line interface (CLI) displays which
three of the following pieces of client configuration information? (Choose
three.) Correct Ans - Adapter address.
IP address.
Lease expiration.
You are troubleshooting a name resolution problem on your local network.
You run two internal Domain Name System (DNS) servers, and they resolve all
local hostnames. Where would you look to verify that your Windows clients
are configured to use the correct DNS servers? Correct Ans - The
ipconfig response.
Which key combination will terminate a continuous Ping issued with the Ping
-t option? Correct Ans - Ctrl+C.
Which TCP/IP troubleshooting tool is the fastest and easiest method to
evaluate whether a host is available across a TCP/IP network? Correct
Ans - Ping
Which of the following echoes information back from an IP process?
Correct Ans - Ping
Which two of the following might cause a ping across network boundaries to
fail? (Choose two.) Correct Ans - Firewalls on the router ports.
, Internet Control Message Filters (ICMP) filters on the router ports.
Which of the following troubleshooting tools tells how many hops to the
destination computer? Correct Ans - tracert.
To determine the path your IP packets take to reach a remote office router,
you issue the tracert command from a local network host, targeted at the
remote office router's outside interface. Previous tracert replies showed the
router nine hops away, so you set the tracert command's maximum hops
option to 10. You ping the remote router interface, 191.67.17.2, and it
succeeds. You issue the command tracert -h 10 191.67.17.2, but the tracert
result does not list the router interface's IP address. Which might be a reason
why this occurred? Correct Ans - Your Internet service provider (ISP)
has added routers between your local and remote network.
Which of the following commands shows the path between source and
destination in a TCP/IP network? Correct Ans - tracert
How many Internet Control Message Protocol (ICMP) packets does the tracert
utility send per hop? Correct Ans - 3
Tracert uses which of the following commands and IP fields to carry out its
operation? Correct Ans - Ping and time-to-live (TTL).
Which command uses Network Basic Input/Output System (NetBIOS) to
display protocol statistics on a local host? Correct Ans - nbtstat.
Which utility displays a host's current Network Basic Input/Output System
(NetBIOS) over a TCP/IP connection? Correct Ans - nbtstat.
Which command can we use in conjunction with the address resolution
protocol (ARP) command to determine the hostname of a cached
NetBIOSover-IP address? Correct Ans - Nbtstat -A <IPaddress>.
You are running an active browser session with your employer's Human
Resources intranet web server. You issue the netstat command from your
local workstation's command prompt. The resulting screen shows several
connections to the web server, each using a separate transmission control
protocol (TCP) port. Why does your client workstation have multiple active
When troubleshooting, why is it important to recreate a problem? Correct
Ans - All of the above.
Which of the following helps to determine local addressing information?
Correct Ans - ipconfig.
Which of the following commands shows the addresses configured on a
Microsoft PC? Correct Ans - ipconfig.
Which TCP/IP tool allows you to display a workstation's network
configuration values? Correct Ans - ipconfig.
Typing ipconfig in the Windows command line interface (CLI) displays which
three of the following pieces of client configuration information? (Choose
three.) Correct Ans - Adapter address.
IP address.
Lease expiration.
You are troubleshooting a name resolution problem on your local network.
You run two internal Domain Name System (DNS) servers, and they resolve all
local hostnames. Where would you look to verify that your Windows clients
are configured to use the correct DNS servers? Correct Ans - The
ipconfig response.
Which key combination will terminate a continuous Ping issued with the Ping
-t option? Correct Ans - Ctrl+C.
Which TCP/IP troubleshooting tool is the fastest and easiest method to
evaluate whether a host is available across a TCP/IP network? Correct
Ans - Ping
Which of the following echoes information back from an IP process?
Correct Ans - Ping
Which two of the following might cause a ping across network boundaries to
fail? (Choose two.) Correct Ans - Firewalls on the router ports.
, Internet Control Message Filters (ICMP) filters on the router ports.
Which of the following troubleshooting tools tells how many hops to the
destination computer? Correct Ans - tracert.
To determine the path your IP packets take to reach a remote office router,
you issue the tracert command from a local network host, targeted at the
remote office router's outside interface. Previous tracert replies showed the
router nine hops away, so you set the tracert command's maximum hops
option to 10. You ping the remote router interface, 191.67.17.2, and it
succeeds. You issue the command tracert -h 10 191.67.17.2, but the tracert
result does not list the router interface's IP address. Which might be a reason
why this occurred? Correct Ans - Your Internet service provider (ISP)
has added routers between your local and remote network.
Which of the following commands shows the path between source and
destination in a TCP/IP network? Correct Ans - tracert
How many Internet Control Message Protocol (ICMP) packets does the tracert
utility send per hop? Correct Ans - 3
Tracert uses which of the following commands and IP fields to carry out its
operation? Correct Ans - Ping and time-to-live (TTL).
Which command uses Network Basic Input/Output System (NetBIOS) to
display protocol statistics on a local host? Correct Ans - nbtstat.
Which utility displays a host's current Network Basic Input/Output System
(NetBIOS) over a TCP/IP connection? Correct Ans - nbtstat.
Which command can we use in conjunction with the address resolution
protocol (ARP) command to determine the hostname of a cached
NetBIOSover-IP address? Correct Ans - Nbtstat -A <IPaddress>.
You are running an active browser session with your employer's Human
Resources intranet web server. You issue the netstat command from your
local workstation's command prompt. The resulting screen shows several
connections to the web server, each using a separate transmission control
protocol (TCP) port. Why does your client workstation have multiple active
