NACE CIP Level 1 Exam 2023 | Guide with Verified Answers (2023/2024 Update)

NACE CIP Level 1 Exam 2023 | Guide with Verified Answers (2023/2024 Update) Q: What are the two primary components of a liquid applied coating? Answer: Pigment, Vehicle (Resin/Binder + Solven) Q: What are the three (3) methods by which a coating provides corrosion control? Answer: barrier, inhibitive, sacrificial (cathodic protection) Q: What are the three different ways a coating can adhere to the surface? Answer: Chemical, Mechanical, Polar/valance or combo of all three Q: The two broad classifications for curing mechanisms are: Answer: Convertible and Non-Convertible Q: List two Non-convertible coating types: Answer: Chlorinated rubber, vinyl Q: List three (3) *convertible* coating curing mechanisms Answer: oxidation, co-reaction (polmerization), hydration, fusion Q: List two (2) characteristics of *oxidation* cure coatings Answer: Not suitable for immersion service, not suitable for use over alkaline substrates, limited dry film thickness per coat Q: List three coating types that cure by *co-reaction (polymerization)* Answer: epoxies, polyurethanes, polyureas, polyaspartics, polysiloxanies Q: Induction time is: Answer: the time required by the Product Data Sheet (coatings manufacturer) between mixing the coating components and the start of application Q: What is the main requirement for a *hydrolysis* coating cure? Answer: Moisture or water Q: Industrial and marine coatings are commonly referred to by Answer: generic resin type Q: Oil based coatings applied over alkaline surfaces may result in_______........(soap)