Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 2 out of 7 pages
Exam (elaborations)

oregon tattoo license exam with complete solutions

Document preview thumbnail
Preview 2 out of 7 pages

can a mobile facility be in motion while performing services - Answer- never when the armature bar is flat on the front coil what is the smallest gap above the rear coil? - Answer- .10 what does a smaller gap above the rear coil cause? - Answer- more power what should armature bars be made of? - Answer- plain steel how does the machine run if too much of the coil core is showing? - Answer- hot what type of edges should your contact screw have? - Answer- rounded and smooth where in on the front spring should the contact screw be hitting? - Answer- front or end of spring what length of spring would run faster - Answer- short spring with a high angle what type of metal should the contact screw be made of to have the highest conductivity - Answer- brass how does the armature bar hit the front coil core - Answer- flat full contact what do you want the frame on your tattoo machine to be? - Answer- nonconductive what happens when your machine is conductive or electrified - Answer- it stays on with the armature bar sticking to the coils what diameter should your binding post be - Answer- 5/16ths what happens if u use a steel contact screw? - Answer- can cause sparks when setting up your machine why would you snug down the eye of the needle bar - Answer- prevent weak jumpy lines why is a one piece contact screw the best choice - Answer- adding things can cause vibration what are two advantages of a brass contact screw - Answer- 100% conductive and it keeps it shape for longer than other metals how much if the contact screw needs to be touching the front spring ? - Answer- tiny contact area why don't you use a coated spring - Answer- coating wears away and causes a bad connection what kind of reaction do you expect from a machine with a very low spring angle? - Answer- weak and spongey which type of machine benefits best from a shorter spring? - Answer- liner which spring is most important for tuning the machine - Answer- rear a machine is hard hitting and fast running moves the needle in and out of the skin so fast that - Answer- not enough pigment is left behind what is the ideal width of the springs used on the machine - Answer- springs should be equally as wide as what they are attached to what types of screws should you use to hold coils to the frame - Answer- a flush magnetic screw tube vise function is - Answer- to firmly hold the tube in place and properly align the tube while the machine is in use how should a tube vise hold a tube in comparison to the machine - Answer- front to back and side to side what is the most important part of the tattoo machine - Answer- coils what is the coils purpose - Answer- to run consistently and not loose power what is a possible reason for the machine to not work at all - Answer- debris between contact screw and front spring what can cause coils to get stuck in the on position - Answer- cool wire, soldering lug, any electrical circuit touching frame what does your frame act as for the coil - Answer- ground what is the purpose of the binding posts - Answer- electrical contact from lugs to contact screw what is a safety feature of cartridge needles - Answer- when not installed the needles are not exposed preventing needlestick EPA - Answer- Environmental Protection Agency FDA - Answer- Food and Drug Administration high level disinfectant is - Answer- chemical agent registered with the epa that is tuberculocidal office in tattoo law refers to - Answer- health licensing office what makes something a sharps container - Answer- puncture resistant, leak proof, labeled with biohazard sticker how many hours are part of the tattoo licensing program - Answer- 360 total 210theory 150practical what does a completed procedure mean? - Answer- a tattoo on a live human finished including touch ups and the client is released how long is a tattoo license active for - Answer- 1 year documents needed to apply for your tattoo license - Answer- application, bbp, cpr, 2 IDs, high school diploma, training from approved tattoo program How long is a Temporary license valid? - Answer- no more than 30 consecutive calendar days how many temporary licenses can u have in a year - Answer- 2 how often to renew license - Answer- once a year a license can be inactive for how long before it's expired - Answer- 3 years how many hours of continuing education do u have to complete in a year - Answer- 10 hrs how many can be self study - Answer- 5 years cpr bbp and first aid count as continuing education when - Answer- never how many hours of continuing Ed can be carried for ward to next renewal - Answer- 8hours how long do u have to submit proof of continuing Ed if u get an audit? - Answer- 30 days from issuance in what instance can u use expired ink - Answer- never where must u get ur ink dyes or pigments - Answer- commercial supplier if not using disposable stencils how do u clean actetate stencil - Answer- clean rinse and immerse in high level disinfectant prior to beginning the procedure a client's skin must be thoroughly cleaned with what kind of chemical - Answer- antiseptic once a procedure is complete what must be used to clean the skin - Answer- a single use paper product saturated with an antiseptic solution what must be used to cover the tattoo once the procedure is complete - Answer- a clean absorbent material or bandage intended to cover wounds to prevent spread of blood or other potentially infectious materials when can u tattoo a minor - Answer- with physicians note for a medical procedure like scar camo when can u tattoo someone with signs of inebriation - Answer- never when can u tattoo someone with a sunburn - Answer- if u are not tattooing the sunburned area if there is not physicians statement when can u tattoo a minor - Answer- never when can a tattoo artist remove a tattoo - Answer- only if they are licensed in the appropriate removal field who is responsible for mainting the equipment in the facility - Answer- anyone who uses it how are chemicals to be stored - Answer- in labeled and closed containers what is required to be single use only - Answer- paper products needles gloves and any other single use only products when can u use the restroom sink as the main hand washing sink - Answer- never when can u use towels and linens during a procedure - Answer- never how to dispose of waste after tattoo - Answer- enclosed in bag then a covered container with garbage liner after each client when should service related waste be disposed of in common area such as the lobby are waiting area? - Answer- never what sharp item doesn't have to be disposed of in the sharps container - Answer- razor blade in original blade cover what requires biohazard label or red biohazard bag - Answer- the waste receptical in the service area that will be used to dispose of biohazard waste animals permitted in the facility? - Answer- service animals dish in aquarium or nonposionus reptiles in terrarium when can u use a stainless steel reusable tube on more than 1 client? - Answer- when it's been through the autoclave and stored properly when can u use a disposable tube on more than one client? - Answer- never when should rinse bottles grips and clip cords be covered - Answer- for every procedure when can u use tapwater in rinsing bottles - Answer- never what can be used as a diluting agent for ink - Answer- distilled or sterilized water how should inks be stored - Answer- in a closed cabinet or drawer when is eye protection shields or masks required? - Answer- when splattering is a possibility what must happen to all substances used during a procedure when it is complete? - Answer- discarded to prevent cross contamination in what instance can a licensee reuse a container or applicator used during a procedure - Answer- never must use how many gloves for each step of the procedure - Answer- 1 how many total pairs of gloves are required for the procedure - Answer- 4 steps to hand washing - Answer- warm running water then liquid soap using friction on all surfaces of hands and wrists then rinse and dry with clean paper towel when must u wash ur hands - Answer- before and after every procedure when can u use bar soap - Answ


Document information

Uploaded on
May 29, 2023
Number of pages
7
Written in
2022/2023
Type
Exam (elaborations)
Contains
Questions & answers
$10.69

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
Gordones22
4.1
(108)
Sold
506
Followers
351
Items
9501
Last sold
1 day ago




Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions

Whoops! We can’t load your doc right now. Try again or contact support.