SCTE BPI EXAM STUDY GUIDE | 200 Questions with 100% Correct Answers | Verified | 25 Pages

Certifying the reliability of the customers drop system involves - Replacing any defective drop components What is one step in verifying that the digital set-top terminal is operating normally? - Calling dispatch or the person designated with access to the billing system software to have the set-top terminal authorized When installing the NIU, you would use - A dial-pulse telephone test set to check dial tone on inbound and outbound call capability In twisted pair cable network powering, - Always wire the twisted pair power cables first to the NIU power terminals and then to the power terminal of the power distributing tap Telephony inside wiring - Is routed from the NID or distribution device through the appropriate compression fitting When testing and verifying NIU operation - Call the provisioning center from the test phone or butt set to verify the ability to place an outbound call