• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 2 out of 9 pages
Exam (elaborations)

NCLE Practice Test Practical Verified A+ 2023

Document preview thumbnail
Preview 2 out of 9 pages

NCLE Practice Test Practical Steep Fluorescein Pattern - Bright green pooling center, very faint green pooling on diameter of lens Flat Fluorescein Pattern - Bright green pooling on diameter of lens, very faint green in center Against-the-rule Astigmatism Pattern - Bright green pooling horizontally, faint green pooling vertically With-the-rule Astigmatism Pattern - Bright green pooling vertically, faint green pooling horizontally Prism Ballast - Common technique to stabilize lens from rotating. Added thickness will position lens inferiorly (bottom of cornea) Truncation - Cutting off .50mm to 1.50mm of bottom edge of lens to provide stability. Reduces diameter, making a looser fit. Double Slab-off - Lens is thicker centrally and thinner at top and bottom of lens. Provides comfort to wearer, but may cause some stability issues. Aspheric Lens Design - Hyperflange - Used to correct high riding minus lenses. Myoflange - Used to correct low riding plus lenses. Monovision - Corrects presbyopia in contact wearers. One eye uses distance (dominant) and the other eye uses reading (resessive) Segment Bifocal - Same concept as spectacle bifocal. Must be prism ballast. Often crescent shaped. Toric Lenses - Anterior (front surface), back spherical surface or posterior (back surface), toric back curve Front Toric Lens - Corrects a low to moderate amount of corneal astigmatism Back Toric Lens - Corrects a mid to high amount of corneal astigmatism Bitoric Lens - Corrects 1.50D of corneal astigmatism and high residual astigmatism Aphakic - Condition of no crystalline lens Psuedophakic - Implant, intraocular lens Corneal Edema - Always causes a poor fitting lens Spectacle Blur - Temporary blurred vision upon switching from contact lenses to eyeglasses Crystalline Lens - The main focusing mechanism of the eye The Main Supply of Oxygen to the cornea is provided by - Tear Film Keratometry mires which are only clear when the wearer blinks are indicative of a - Steep Fit Keratometry mires which blur immediately following blink are indicative of a - Flat Fit A rigid contact lens shows a flourescein pattern inferiorly and superiorly beneath the lens. This is indicative of which type of astigmatism - With-the-rule A bi-toric rigid lens will show - Two base curves on the radiuscope, sphero-cylindrical rx on the lensometer The ANSI tolerance for a soft lens diameter is - ±0.25 The ANSI tolerance for a soft lens refractive power on a Rx 5.12D to 10.00D - ±0.18 The ANSI tolerance for RGP Base Curve is - ±0.05mm The ANSI tolerance for RGP lens diameter is - ±0.05mm Which instrument allows simultaneous verification of lens diameter, optic zone width, and peripheral curve - Radiuscope Which instrument is best to observe the blends of rigid contact lens - Profile Analyzer If a toric lens rotates to the fitters left - Add the degrees of rotation to the prescribed axis If a toric lens rotates to the fitters right - Subtract (minus) the degrees of rotation to the prescribed axis Increasing the sagittal depth of a rigid lens will - Not change the effective power of the lens How would you stop rotation in a bifocal lens - Truncate the lens Change the base curve Increase prism The DK value of a lens is - Oxygen permeability of that material The original rigid material used in contact lens manufacturing - Polymethylmethacrylate (PMMA) Orthokeratology may be defined as - Reduction of refractive errors by corneal molding with the contact lens applications What can be used to evaluate a dry eye patient - Sodium Flourscein Schirmer Strips Rose Bengal An advantage of a flourocarbon lens is its - High DK value Given an Rx of -4.00 + 0.75 x 90 K readings of 43.50@180/44.25@90 a lens designed on K would have an effective sphere power of - -3.25 (always remember to transpose to minus format) A protein found in the tear film that is a potent germ killer - Lysozyme When trial lens fitting a soft lens patient, after placing the lens on the eye, you should - Allow the lens to settle twenty minutes before evaluating Corneal epithelial edema will appear as - A grey haze, using a slit lamp with sclerotic scatter and the unaided eye Apical flourescein pooling under a rigid lens indicates - A tight fit A dynamic flourescein pattern is best illuminated by - Cobalt blue light An "ideal" flouorescein pattern for a spherical lens on a spherical cornea would show - An even distribution of flourescein with added thickness under the peripheral curves When a rigid contact lens shows apical touch, this would indicate - A flat fit When a spectacle Rx exceeds __________ D, vertex distance must be compensated for when determining the power of a contact lens - ±4.00 Astigmatism that is left over after a contact lens is placed on the eye - Residual Astigmatism Fenestrations are put into a lens to - Increase oxygen transmission When the power of a bifocal gradually changes from the central area of the lens to the periphery, it is called - An aspheric lens A bifocal design that utilizes a small central reading area and a distance periphery is - Reverese Centrad In the manufacturing process, when there is a polished front curve, a polished back curve and a diameter, it is - Semi-finished lens Back toric lens works with - High corneal toricity Single Cut aphakic contact lenses can be well suited for patients with - small apertures and flat corneas In bitoric lens fitting, rotation is controlled by - Relationship of base curve to anterior corneal cylinder The amount of prism ballast often used in ballasted lenses to prevent lens rotation - 1.50D of prism A aspheric PCC - Is a toric pcc and has a specific eccentricity value Diameter of a contact lens can be reduced by: a. razor blade b. cut down stone c. file technique d. all the above - d. all the above Good example of a bifocal contact lens which may rotate without vision impairment is - An aspheric lens


Document information

Uploaded on
May 14, 2023
Number of pages
9
Written in
2022/2023
Type
Exam (elaborations)
Contains
Questions & answers
$13.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
Academicmines
4.0
(18)
Sold
96
Followers
55
Items
2686
Last sold
3 weeks ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions

Whoops! We can’t load your doc right now. Try again or contact support.