OSHA 30 Final Test

Which of the following is NOT a basic element of a safety and health culture? A. Everyone has a first priority for production and profit. B. Everyone accepts responsibility for one's own safety and health. C. Everyone has a duty to protect the safety and health of others. D. Everyone has a right to a safe and healthy workplace. Fall protection would not be required in which of the following situations? A. An employee constructing a leading edge 16 feet off the ground. B. Employees working near a wall opening 10 feet off the ground. C. An employee working on a ramp that is three feet above a lower level. D. All of these require fall protection. Welding and cutting operations are allowed in: A. Buildings with impaired sprinkler systems. B. Well-ventilated areas where all fire hazards have been removed or guarded. C. Areas with explosive atmospheres. D. Storage areas for readily ignitable materials such as baled paper. What is the Hazard Communication Standard commonly called? A. Code of Federal Regulations B. Chemicals in the Workplace Regulations C. Worker Right-to-Know Law D. Chemical Safety Rules Entrances to rooms and other guarded locations containing _____________ must be marked with conspicuous warning signs forbidding unqualified persons to enter. A. De-energized equipment B. Dust C. Locked equipment D. Exposed, live parts The three types of scaffolds are ___________. A. Supported, two point suspension, and aerial lift trucks This study source was downloaded by from CourseH on :27:09 GMT -06:00 B. Supported, aerial lift trucks, and "cherry pickers" C. Supported, needle beam, and two point suspension D. Supported, suspended, and aerial lift trucks