Itn 200 Final 2023 Exam Questions With Correct Answers

ITN 200 Final 2023 EXAM QUESTIONS WITH CORRECT ANSWERS The modern partition table is called the Master Boot Record (MBR) and uses storage devices that are larger than 2 TB. - CORRECT ANSWERS False Using a disk management tool, you can create a GPT on a disk that has an MBR when no partitions exist on a disk. - CORRECT ANSWERS True Trimming erases sections of the volatile memory chips on an SSD that no longer contain data, consolidating the existing data into fewer memory locations. - CORRECT ANSWERS False Sonia is configuring a RAID level 5 array with five disks. Each disk has the capacity to store 3 TB of data. What is the total storage size that Sonia can use to store data? - CORRECT ANSWERS 12TB Rebecca is configuring a RAID with three storage devices. If she saves a file, the file will be divided into three sections, with each section written to separate storage devices concurrently, in a third of the amount of time it would take to save the entire file on one storage device. - CORRECT ANSWERS RAID Level 0 Which of the following RAID level configurations is not supported by Windows Server 2019? - CORRECT ANSWERS RAID Level 2 While copying files between folders, it is possible to retrace and complete the transfer in case of a power failure if an NTFS-based filesystem is being used. The same cannot be said for a FAT32 filesystem. - CORRECT ANSWERS NTFS is a journaling filesystem, while FAT32 is not. Imran is associating a drive letter to a filesystem so that the drive letter can be accessed by the operating system. What is the term given to the process that Imran is carrying out. - CORRECT ANSWERS Mounting You are asked to create seven partitions in a storage device that uses an MBR. The device already has two partitions. However, you are also told that you cannot create more than a certain number of partitions on the storage device using an MBR. - CORRECT ANSWERS Create the partitions and label one of the partitions as extended How much storage space is reserved on a storage device to convert a storage disk to a dynamic disk using a Windows tool? - CORRECT ANSWERS 1 MB One of the disks on your computer is running low on storage space. You notice that there is unallocated space in the spanned volume. - CORRECT ANSWERS Right-click the volume on that disk and click Extend Volume to increase the size of the volume using the unallocated space. Nadia uses the Disk Management tool to create a simple volume in one of the disks. She specifies the simple volume size and chooses a drive letter. While selecting the formatting options, she modifies the default allocation unit size. What will happen if the allocation unit size is large? - CORRECT ANSWERS The performance of file sharing applications will increase. How do you create a RAID level 1 volume with two disks in the Disk Management tool? - CORRECT ANSWERS Right-click on the disk that you want to configure as a RAID volume and then click New Mirrored Volume to create a RAID level 1 volume with two disks. Gabriela attempts to create a virtual disk on a storage pool using Server Manager. However, she is unable to select the Create storage tiers on this virtual disk option. - CORRECT ANSWERS The system uses an SSD and not an HDD. Tara, an administrator, has added storage devices to the storage pool and selected the RAID level for the virtual disk using Server Manager. She wishes to allocate more space than is required for the current amount of data such that the system only uses the actual space it needs, enabling the actual size to grow with data. - CORRECT ANSWERS Create several thin-provisioned virtual disks Identify the option that can be used to create storage pools that include storage devices from different servers on a network. - CORRECT ANSWERS Storage Spaces Direct Which of the following is a requirement for using Storage Spaces Direct? - CORRECT ANSWERS A 10 GB Ethernet network interface with remote-direct memory access (RDMA) support is a must. A server rack containing data files, databases, web content, etc. is stored on an external SAN, which is connected to the Windows Server 2019 operating system via iSCSI. - CORRECT ANSWERS Using hardware RAID externally to provide fault tolerance Which of the following statements is true of SAN devices? - CORRECT ANSWERS SAN devices are functionally like an external USB drive. Which of the following is a term given to the software component in the operating system that connects to the SAN device via iSCSI? - CORRECT ANSWERS iSCSI initiator Shaw, a server administrator, uses an iSCSI SAN protocol to transfer data to and from SAN devices at a speed of up to 40 Gb/s. He configures one of the SAN devices to provide storage to Jasper's Windows Server 2019 system. - CORRECT ANSWERS The iSCSI target