API 1104 TERMS VERIFIED STUDY GUIDE
Butt weld - Answers - A nonstandard term for a weld in a butt joint, which is a joint
between two members aligned approximately in the same place.
Classification number - Answers - A number in an AWS numbering system that
identifies electrodes and filler metals according to their chemistry and operating
characteristics.
SMAW--7018, GMAW--ER70S-6, GTAW--EWTH-2
defect - Answers - A rejectable imperfection that impairs the suitability of a structure
for its intended purpose. API 1104 Section 9 for a list of types of imperfections.
destructive testing - Answers - Testing that renders the material or part useless for
service, performed to obtain information on material properties and soundness.
discontinuity - Answers - An irregularity in an otherwise uniform structure. See API
1104 Section 9 for a list of types of imperfections and the criteria that may allow
them in a weldment. API 1104 does not use the word discontinuity but rather calls
them indications or imperfections. Not all discontinuities, imperfections or indications
are rejectable.
essential variable - Answers - A component of a welding procedure specification that
requires requalification if changed beyond certain limits specified in the applicable
code
face reinforcement - Answers - A weld metal build-up, raised above the surface of
the parent metal in excess of of what is required to fill a groove joint on the side of
the base metal from which welding was done.
faying surface - Answers - The mating surface of two parts that are to be welded
together.
filler metal - Answers - The metal or alloy to be added in making a brazed, soldered
or welded joint.
fillet weld - Answers - A weld of approximately triangular cross section joining two
surfaces approximately at right angles.
fisheye - Answers - A discontinuity attributed to the presence of hydrogen in the
weld, observed on the fracture surface of a weld in steel that consists of a small pore
or inclusion surrounded by a round bright area.
flux - Answers - A substance that hinders or prevents oxide formation, and promotes
the union of the metals being joined.
Butt weld - Answers - A nonstandard term for a weld in a butt joint, which is a joint
between two members aligned approximately in the same place.
Classification number - Answers - A number in an AWS numbering system that
identifies electrodes and filler metals according to their chemistry and operating
characteristics.
SMAW--7018, GMAW--ER70S-6, GTAW--EWTH-2
defect - Answers - A rejectable imperfection that impairs the suitability of a structure
for its intended purpose. API 1104 Section 9 for a list of types of imperfections.
destructive testing - Answers - Testing that renders the material or part useless for
service, performed to obtain information on material properties and soundness.
discontinuity - Answers - An irregularity in an otherwise uniform structure. See API
1104 Section 9 for a list of types of imperfections and the criteria that may allow
them in a weldment. API 1104 does not use the word discontinuity but rather calls
them indications or imperfections. Not all discontinuities, imperfections or indications
are rejectable.
essential variable - Answers - A component of a welding procedure specification that
requires requalification if changed beyond certain limits specified in the applicable
code
face reinforcement - Answers - A weld metal build-up, raised above the surface of
the parent metal in excess of of what is required to fill a groove joint on the side of
the base metal from which welding was done.
faying surface - Answers - The mating surface of two parts that are to be welded
together.
filler metal - Answers - The metal or alloy to be added in making a brazed, soldered
or welded joint.
fillet weld - Answers - A weld of approximately triangular cross section joining two
surfaces approximately at right angles.
fisheye - Answers - A discontinuity attributed to the presence of hydrogen in the
weld, observed on the fracture surface of a weld in steel that consists of a small pore
or inclusion surrounded by a round bright area.
flux - Answers - A substance that hinders or prevents oxide formation, and promotes
the union of the metals being joined.