AND CORRECT ANSWERS (VERIFIED ANSWERS)
Q&A 2027|INSTANT DOWNLOAD PDF
1. What is the primary ingredient in ordinary Portland
cement?
A. Gypsum B. Limestone and clay C. Sand and gravel D. Wood
ash
Correct answer: B. Limestone and clay.
Rationale: Portland cement is manufactured primarily from
limestone and clay or other materials supplying calcium, silica,
alumina, and iron. These ingredients are processed at high
temperatures to form clinker, which is ground with gypsum.
2. What is the primary purpose of mortar in masonry
construction?
A. To waterproof every masonry surface B. To provide electrical
insulation C. To bond masonry units and distribute loads D. To
replace structural reinforcement
Correct answer: C. To bond masonry units and distribute loads.
Rationale: Mortar bonds individual masonry units,
accommodates minor dimensional variations, distributes
compressive stresses, and helps create a stable masonry
assembly.
,3. Which material is commonly used as fine aggregate in
mortar?
A. Crushed glass B. Masonry sand C. Large gravel D. Steel chips
Correct answer: B. Masonry sand.
Rationale: Clean, properly graded masonry sand provides the
fine aggregate needed for mortar workability, volume, and
strength development.
4. What is the primary function of water in a cement-based
mortar mixture?
A. To change the mortar color B. To initiate cement hydration
and provide workability C. To eliminate the need for sand D. To
prevent all shrinkage
Correct answer: B. To initiate cement hydration and provide
workability.
Rationale: Water reacts chemically with cement during
hydration and makes the mixture workable. Excess water can
reduce strength and increase shrinkage.
5. Which masonry unit is manufactured from fired clay?
A. Concrete masonry unit B. Calcium silicate block C. Clay brick
D. Gypsum block
Correct answer: C. Clay brick.
,Rationale: Clay bricks are formed from clay or shale and fired in
kilns at high temperatures to develop their strength and
durability.
6. What does CMU stand for?
A. Cement Mortar Utility B. Concrete Masonry Unit C. Concrete
Mixing Unit D. Compressed Masonry Utility
Correct answer: B. Concrete Masonry Unit.
Rationale: CMU is the standard abbreviation for concrete
masonry unit, commonly used in foundation walls, partitions,
retaining walls, and structural construction.
7. What is the purpose of aggregate in concrete masonry
units?
A. To provide bulk and contribute to strength and dimensional
stability B. To eliminate cement C. To make blocks completely
waterproof D. To replace curing
Correct answer: A. To provide bulk and contribute to strength
and dimensional stability.
Rationale: Aggregates make up a substantial portion of
concrete masonry units. Their grading and properties influence
density, strength, texture, and durability.
8. Which property describes a masonry material's ability to
resist crushing under a compressive load?
A. Flexibility B. Compressive strength C. Ductility D. Elasticity
, Correct answer: B. Compressive strength.
Rationale: Compressive strength measures resistance to
crushing forces. Masonry is generally designed to carry
substantial compressive loads.
9. What is efflorescence?
A. Rust formation on reinforcement B. White salt deposits on
masonry surfaces C. Cracking caused by earthquakes D. Mortar
discoloration from soot
Correct answer: B. White salt deposits on masonry surfaces.
Rationale: Efflorescence occurs when water transports soluble
salts through masonry and deposits them on the surface as the
water evaporates.
10. Which material is commonly used to construct mortar
joints?
A. Portland cement-based mortar B. Roofing asphalt C. Joint
compound D. Gypsum plaster only
Correct answer: A. Portland cement-based mortar.
Rationale: Cement-based masonry mortar is commonly used to
bond brick, concrete block, and stone units. The specified
mortar type must suit the application.
11. What is the main purpose of gypsum added during
Portland cement manufacture?