MSF BASIC ECOURSE PREPARING TO RIDE QUESTIONS
WITH VERIFIED ANSWERS LATEST UPDATE
Question 1.
A white or brightly colored helmet provides more visibility in traffic than a darker colored helmet.
A. True
B. False
ANSWER
A. True
Question 2.
Rain Protection
ANSWER
Riding in the rain requires a rain suit since you will be more comfortable and alert when not
wet and chilled.
One or two-piece styles are available. When selecting a suit, bright orange or yellow colors are
good choices.
Be sure to have elastic in the waist, pant legs, and sleeves for a snug fit. The jacket should have
a high collar, and should zip up with wide flaps across the zippered opening.
Adding waterproof gloves and boot covers to your rain suit is a good idea. Some motorcycle
boots are waterproof.
Question 3.
A rider dresses in layers to:
A. Be more colorful
B. Be more visible
C. Adjust to changing temperatures
D. Match helmet color
ANSWER
C. Adjust to changing temperatures
, Question 4.
Oil and Other Fluids
ANSWER
O, for oil and other fluids.
Some of the oils and fluids in your motorcycle are responsible for making the engine, and
other parts of the drivetrain, run smooth and cool, by reducing friction and heat. Special fluids
are used if your bike has a hydraulic braking system. Always make sure there's enough oil in
the engine before starting it, or you could cost yourself a lot of money. Check the level, as
directed in the owner's manual, usually when the engine is warm with the dipstick or sight
glass, with the bike upright, and add oil as needed.
Make sure to change the oil and the filter, on schedule or even more frequently than what
your manual says. Oil is the life-blood of internal combustion engines, and old or low-quality
oils can accelerate engine wear.
Take a glance at your brake fluid levels, too. And follow the owner's manual directions on
checking or replacing any transmission oil or shaft drive fluid.
If you have a liquid-cooled engine, check the coolant level, as directed in the owner's manual.
Never open the radiator cap when the engine is hot.
All of these fluids need to be changed periodically, because they deteriorate with age. Fresh
fluids do their job better than old fluids.
And, of course, before and during a ride, you really want to know exactly how much fuel you
have on board so you don't run out, miles from a gas station. Use a quality fuel and check
octane requirements in your owner's manual. You want the freshest possible fuel in your bike,
as gasoline can begin to go bad after several weeks and clog your fuel system.
If you've got an electric motorcycle, make sure it's charged enough for your ride, and know
where the next charging station is if you'll need one on your journey.
Question 5.
Helmet Basics
ANSWER
There are four basic parts of a helmet. They are:
The Outer Shell, which keeps objects from reaching the head as it absorbs impacts. If a helmet
has an impact, it should be professionally inspected and replaced as necessary. Damage may
not be visible.
The Impact-Absorbing Liner, which is made of material to absorb shock. It works with the
outer Shell to dissipate energy throughout the helmet so there is less damage to the head and
brain.
The Comfort Padding is the soft foam and cloth layer next to your head. It helps with comfort
and fit and can often be removed for cleaning.
The Retention System, used to fasten the helmet to your head. It is commonly a chinstrap with
D-rings. If a helmet is not secured well, it may come off during a mishap and its protection is
lost.
WITH VERIFIED ANSWERS LATEST UPDATE
Question 1.
A white or brightly colored helmet provides more visibility in traffic than a darker colored helmet.
A. True
B. False
ANSWER
A. True
Question 2.
Rain Protection
ANSWER
Riding in the rain requires a rain suit since you will be more comfortable and alert when not
wet and chilled.
One or two-piece styles are available. When selecting a suit, bright orange or yellow colors are
good choices.
Be sure to have elastic in the waist, pant legs, and sleeves for a snug fit. The jacket should have
a high collar, and should zip up with wide flaps across the zippered opening.
Adding waterproof gloves and boot covers to your rain suit is a good idea. Some motorcycle
boots are waterproof.
Question 3.
A rider dresses in layers to:
A. Be more colorful
B. Be more visible
C. Adjust to changing temperatures
D. Match helmet color
ANSWER
C. Adjust to changing temperatures
, Question 4.
Oil and Other Fluids
ANSWER
O, for oil and other fluids.
Some of the oils and fluids in your motorcycle are responsible for making the engine, and
other parts of the drivetrain, run smooth and cool, by reducing friction and heat. Special fluids
are used if your bike has a hydraulic braking system. Always make sure there's enough oil in
the engine before starting it, or you could cost yourself a lot of money. Check the level, as
directed in the owner's manual, usually when the engine is warm with the dipstick or sight
glass, with the bike upright, and add oil as needed.
Make sure to change the oil and the filter, on schedule or even more frequently than what
your manual says. Oil is the life-blood of internal combustion engines, and old or low-quality
oils can accelerate engine wear.
Take a glance at your brake fluid levels, too. And follow the owner's manual directions on
checking or replacing any transmission oil or shaft drive fluid.
If you have a liquid-cooled engine, check the coolant level, as directed in the owner's manual.
Never open the radiator cap when the engine is hot.
All of these fluids need to be changed periodically, because they deteriorate with age. Fresh
fluids do their job better than old fluids.
And, of course, before and during a ride, you really want to know exactly how much fuel you
have on board so you don't run out, miles from a gas station. Use a quality fuel and check
octane requirements in your owner's manual. You want the freshest possible fuel in your bike,
as gasoline can begin to go bad after several weeks and clog your fuel system.
If you've got an electric motorcycle, make sure it's charged enough for your ride, and know
where the next charging station is if you'll need one on your journey.
Question 5.
Helmet Basics
ANSWER
There are four basic parts of a helmet. They are:
The Outer Shell, which keeps objects from reaching the head as it absorbs impacts. If a helmet
has an impact, it should be professionally inspected and replaced as necessary. Damage may
not be visible.
The Impact-Absorbing Liner, which is made of material to absorb shock. It works with the
outer Shell to dissipate energy throughout the helmet so there is less damage to the head and
brain.
The Comfort Padding is the soft foam and cloth layer next to your head. It helps with comfort
and fit and can often be removed for cleaning.
The Retention System, used to fasten the helmet to your head. It is commonly a chinstrap with
D-rings. If a helmet is not secured well, it may come off during a mishap and its protection is
lost.
