FIRE INSPECTOR 2 Questions with Correct Solutions
Question:
1. Windows
Answer:
Windows are not exits.
Question:
2. Doors
Answer:
Normally they should be kept closed to limit the spread of smoke.
Question:
3. Exits separation in unsprinklered buildings
Answer:
If the diagonal measurement of a space is 200', exits must be separated by at least 100'.
Question:
4. Egress capacity of a door
Answer:
To calculate the egress capacity of a door, the factor to use is 0.2" per occupant.
Question:
5. Occupant load
Answer:
The occupant load determines the number of people who might occupy a given area.
Question:
6. Standard occupant load factors
Answer:
In order to calculate the occupant load for a building, the fire inspector needs Standard
occupant load factors from NFPA 1.
Question:
7. AHJ increase occupant load
,Answer:
The AHJ can increase the designed occupant load when other parts of the means of egress are
sufficient.
Question:
8. Exit access
Answer:
The exit access is that portion of a means of egress that leads to the entrance of an exit.
Question:
9. Exit discharge
Answer:
That portion of a means of egress between the termination of the exit and a public way is the
exit discharge.
Question:
10. Exits must be
Answer:
Exits must be remote from each other.
Question:
11. Free and unobstructed exit access
Answer:
If the exit access passes through an area containing a fire hazard, the principle of free and
unobstructed exit access is violated.
Question:
12. Minimum exits for occupancy load
Answer:
The minimum of 4 exits are necessary for an occupancy load of 1000 or more.
Question:
13. Egress capacity in multistory buildings
Answer:
In multistory buildings, the floor requiring the greatest egress capacity dictates the minimum
stair width from that floor down to the exit discharge.
Question:
14. Occupant load for stairs
, Answer:
In a 5-story building, if all but the 3rd floor have a capacity of 100 and the 3rd floor has a
capacity of 200, the correct occupant load for the stairs below that level must be calculated.
Question:
15. Width of any component of the means of egress
Answer:
Usually not less than 36".
Question:
16. Maximum projection at each side of a means of egress
Answer:
4½", provided they do not occur above 38" from the ground.
Question:
17. Required means of egress from any area
Answer:
2, as specified by the Life Safety Code.
Question:
18. What occurs when an occupant travels a corridor and finds no exit
Answer:
A dead end exists.
Question:
19. Starting point used to measure travel distance to an exit
Answer:
The most remote point subject to occupancy.
Question:
20. Egress capacity
Answer:
The number of people allowed through any point of the means of egress.
Question:
21. All exits must have doors
Answer:
False; not every door is an exit.
Question:
1. Windows
Answer:
Windows are not exits.
Question:
2. Doors
Answer:
Normally they should be kept closed to limit the spread of smoke.
Question:
3. Exits separation in unsprinklered buildings
Answer:
If the diagonal measurement of a space is 200', exits must be separated by at least 100'.
Question:
4. Egress capacity of a door
Answer:
To calculate the egress capacity of a door, the factor to use is 0.2" per occupant.
Question:
5. Occupant load
Answer:
The occupant load determines the number of people who might occupy a given area.
Question:
6. Standard occupant load factors
Answer:
In order to calculate the occupant load for a building, the fire inspector needs Standard
occupant load factors from NFPA 1.
Question:
7. AHJ increase occupant load
,Answer:
The AHJ can increase the designed occupant load when other parts of the means of egress are
sufficient.
Question:
8. Exit access
Answer:
The exit access is that portion of a means of egress that leads to the entrance of an exit.
Question:
9. Exit discharge
Answer:
That portion of a means of egress between the termination of the exit and a public way is the
exit discharge.
Question:
10. Exits must be
Answer:
Exits must be remote from each other.
Question:
11. Free and unobstructed exit access
Answer:
If the exit access passes through an area containing a fire hazard, the principle of free and
unobstructed exit access is violated.
Question:
12. Minimum exits for occupancy load
Answer:
The minimum of 4 exits are necessary for an occupancy load of 1000 or more.
Question:
13. Egress capacity in multistory buildings
Answer:
In multistory buildings, the floor requiring the greatest egress capacity dictates the minimum
stair width from that floor down to the exit discharge.
Question:
14. Occupant load for stairs
, Answer:
In a 5-story building, if all but the 3rd floor have a capacity of 100 and the 3rd floor has a
capacity of 200, the correct occupant load for the stairs below that level must be calculated.
Question:
15. Width of any component of the means of egress
Answer:
Usually not less than 36".
Question:
16. Maximum projection at each side of a means of egress
Answer:
4½", provided they do not occur above 38" from the ground.
Question:
17. Required means of egress from any area
Answer:
2, as specified by the Life Safety Code.
Question:
18. What occurs when an occupant travels a corridor and finds no exit
Answer:
A dead end exists.
Question:
19. Starting point used to measure travel distance to an exit
Answer:
The most remote point subject to occupancy.
Question:
20. Egress capacity
Answer:
The number of people allowed through any point of the means of egress.
Question:
21. All exits must have doors
Answer:
False; not every door is an exit.
