FIRE INSPECTOR 2 Questions with Correct Solutions
Question:
1. A code is:
Answer:
A legal requirement of a building feature or operating feature at a certain location
Question:
2. A standard is:
Answer:
A set of specifications or requirements that is considered industry best practice and meets a
minimum level of performance guidelines
Question:
3. The most important tool the fire inspector possesses is:
Answer:
Knowledge
Question:
4. Any non-compliance (code violation) that has been noticed during the fire inspection:
Answer:
Must be documented in the written report of the inspection
Question:
5. One of the things that a Fire Inspector II could be expected to do that a Fire Inspector I
would not, is to:
Answer:
Process a permit application
Question:
6. A permit to use a chemical during a manufacturing process is an example of a(n):
Answer:
Hazardous materials use permit
Question:
7. Which of the following individuals may have full police powers to investigate and arrest
suspected arsonist and people causing false alarms?
,Answer:
Fire investigator
Question:
8. To ensure that an installation or construction is safe to be occupied, a fire inspector uses:
Answer:
Both prescriptive code and performance-based code
Question:
9. The International Code Council is an example of a(n):
Answer:
Model code organization
Question:
10. The principles that a fire inspector should follow during an inspection are dictated by:
Answer:
Ethics
Question:
11. In the process of adopting a new or modified code or standard, the correct sequence of
steps would be:
Answer:
Identification of need, Review by elected officials, public hearing, adoption of code into
statute
Question:
12. Which of the following positions describes a fire inspector who works within a fire
department and who may respond to the fire scenes for investigative purposes?
Answer:
Fire Marshal
Question:
13. Type II building is:
Answer:
Same as Type I but with less fire resistance
Question:
14. Dry wall is considered:
, Answer:
Limited-Combustible
Question:
15. Masonry exterior bearing walls are usually found in:
Answer:
Type III and IV construction
Question:
16. What can be said about steel members?
Answer:
They can melt in a severe fire
Question:
17. Part of the building's weight and the building's content are supported by a:
Answer:
Load-bearing wall
Question:
18. The most fire-resistive category of building construction is:
Answer:
Type I
Question:
19. Annealed glass is known as:
Answer:
Single-pane glass
Question:
20. The most common building material is:
Answer:
Wood
Question:
21. Pyrolysis refers to:
Answer:
Decomposition without combustion
Question:
1. A code is:
Answer:
A legal requirement of a building feature or operating feature at a certain location
Question:
2. A standard is:
Answer:
A set of specifications or requirements that is considered industry best practice and meets a
minimum level of performance guidelines
Question:
3. The most important tool the fire inspector possesses is:
Answer:
Knowledge
Question:
4. Any non-compliance (code violation) that has been noticed during the fire inspection:
Answer:
Must be documented in the written report of the inspection
Question:
5. One of the things that a Fire Inspector II could be expected to do that a Fire Inspector I
would not, is to:
Answer:
Process a permit application
Question:
6. A permit to use a chemical during a manufacturing process is an example of a(n):
Answer:
Hazardous materials use permit
Question:
7. Which of the following individuals may have full police powers to investigate and arrest
suspected arsonist and people causing false alarms?
,Answer:
Fire investigator
Question:
8. To ensure that an installation or construction is safe to be occupied, a fire inspector uses:
Answer:
Both prescriptive code and performance-based code
Question:
9. The International Code Council is an example of a(n):
Answer:
Model code organization
Question:
10. The principles that a fire inspector should follow during an inspection are dictated by:
Answer:
Ethics
Question:
11. In the process of adopting a new or modified code or standard, the correct sequence of
steps would be:
Answer:
Identification of need, Review by elected officials, public hearing, adoption of code into
statute
Question:
12. Which of the following positions describes a fire inspector who works within a fire
department and who may respond to the fire scenes for investigative purposes?
Answer:
Fire Marshal
Question:
13. Type II building is:
Answer:
Same as Type I but with less fire resistance
Question:
14. Dry wall is considered:
, Answer:
Limited-Combustible
Question:
15. Masonry exterior bearing walls are usually found in:
Answer:
Type III and IV construction
Question:
16. What can be said about steel members?
Answer:
They can melt in a severe fire
Question:
17. Part of the building's weight and the building's content are supported by a:
Answer:
Load-bearing wall
Question:
18. The most fire-resistive category of building construction is:
Answer:
Type I
Question:
19. Annealed glass is known as:
Answer:
Single-pane glass
Question:
20. The most common building material is:
Answer:
Wood
Question:
21. Pyrolysis refers to:
Answer:
Decomposition without combustion
