(AVIXA CTS Sample Exam – Combined Assessment Sets
A, B, and C)
AVIXA CTS | 3 Papers | 225 Unique Questions | Answers and Rationales Included
Educational use only. This practice assessment supports preparation for AVIXA CTS. It does not replace
official AVIXA course materials, instructor guidance, or professional certification requirements.
This assessment covers AV systems and signal flow, network technologies and TCP/IP, installation and
cabling, troubleshooting and maintenance, and AV design and system integration. It includes foundational
through advanced AV concepts aligned with CTS.
AVIXA CTS Sample Exam Practice – Page 1
,(Paper 1: AVIXA CTS Sample Exam – Assessment Set A)
Difficulty focus: Easy | 75 Multiple-Choice Questions | 75 True/False Questions
Section 1: Multiple-Choice Questions
1. What is the primary purpose of no video for camera?
A. Indicate fault
B. Increase confusion
C. Avoid issue
D. Ignore issue
Answer: A
Rationale: no video indicates fault.
2. What is the primary purpose of digital signage system for media player?
A. Deliver HDMI signal
B. Increase confusion
C. Avoid system
D. Ignore system
Answer: A
Rationale: digital signage system delivers HDMI signal.
3. What is the primary purpose of 1080p for amplifier?
A. Indicate resolution or quality
B. Increase confusion
C. Avoid value
D. Ignore value
Answer: A
Rationale: Indicates quality.
4. What is the primary purpose of firmware update for touch panel?
A. Resolve no response
B. Increase confusion
C. Avoid intervention
D. Ignore intervention
Answer: A
Rationale: firmware update resolves no response.
5. What is the primary purpose of TCP/IP in audiovisual system?
A. Enable communication
B. Increase confusion
C. Avoid protocol
D. Ignore protocol
Answer: A
Rationale: TCP/IP enables communication.
AVIXA CTS Sample Exam Practice – Page 2
,6. What is the primary purpose of USB signal in video conferencing system?
A. Carry information
B. Increase confusion
C. Avoid signal
D. Ignore signal
Answer: A
Rationale: Carries information.
7. What is the primary purpose of control signal in control system?
A. Carry information
B. Increase confusion
C. Avoid signal
D. Ignore signal
Answer: A
Rationale: control signal carries information.
8. What is the primary purpose of processor in control system?
A. Process or display control signal
B. Increase confusion
C. Avoid device
D. Ignore device
Answer: A
Rationale: processor processes/displays control signal.
9. What is the primary purpose of touch panel in control system?
A. Process or display control signal
B. Increase confusion
C. Avoid device
D. Ignore device
Answer: A
Rationale: touch panel processes/displays control signal.
10. What is the primary purpose of IP network in audiovisual system?
A. Connect devices
B. Increase confusion
C. Avoid network
D. Ignore network
Answer: A
Rationale: Connects devices.
11. What is the primary purpose of audio system for amplifier?
A. Deliver audio signal
B. Increase confusion
C. Avoid system
D. Ignore system
Answer: A
Rationale: Delivers audio signal.
AVIXA CTS Sample Exam Practice – Page 3
, 12. What is the primary purpose of 1080p for display?
A. Indicate resolution or quality
B. Increase confusion
C. Avoid value
D. Ignore value
Answer: A
Rationale: 1080p indicates quality.
13. What is the primary purpose of camera in video conferencing system?
A. Process or display USB signal
B. Increase confusion
C. Avoid device
D. Ignore device
Answer: A
Rationale: Processes/displays USB signal.
14. What is the primary purpose of IP network in digital signage system?
A. Connect devices
B. Increase confusion
C. Avoid network
D. Ignore network
Answer: A
Rationale: IP network connects devices.
15. What is the primary purpose of HDMI signal in digital signage system?
A. Carry information
B. Increase confusion
C. Avoid signal
D. Ignore signal
Answer: A
Rationale: HDMI signal carries information.
16. What is the primary purpose of firmware update for camera?
A. Resolve no video
B. Increase confusion
C. Avoid intervention
D. Ignore intervention
Answer: A
Rationale: firmware update resolves no video.
17. What is the primary purpose of IP network in control system?
A. Connect devices
B. Increase confusion
C. Avoid network
D. Ignore network
Answer: A
Rationale: IP network connects devices.
AVIXA CTS Sample Exam Practice – Page 4
A, B, and C)
AVIXA CTS | 3 Papers | 225 Unique Questions | Answers and Rationales Included
Educational use only. This practice assessment supports preparation for AVIXA CTS. It does not replace
official AVIXA course materials, instructor guidance, or professional certification requirements.
This assessment covers AV systems and signal flow, network technologies and TCP/IP, installation and
cabling, troubleshooting and maintenance, and AV design and system integration. It includes foundational
through advanced AV concepts aligned with CTS.
AVIXA CTS Sample Exam Practice – Page 1
,(Paper 1: AVIXA CTS Sample Exam – Assessment Set A)
Difficulty focus: Easy | 75 Multiple-Choice Questions | 75 True/False Questions
Section 1: Multiple-Choice Questions
1. What is the primary purpose of no video for camera?
A. Indicate fault
B. Increase confusion
C. Avoid issue
D. Ignore issue
Answer: A
Rationale: no video indicates fault.
2. What is the primary purpose of digital signage system for media player?
A. Deliver HDMI signal
B. Increase confusion
C. Avoid system
D. Ignore system
Answer: A
Rationale: digital signage system delivers HDMI signal.
3. What is the primary purpose of 1080p for amplifier?
A. Indicate resolution or quality
B. Increase confusion
C. Avoid value
D. Ignore value
Answer: A
Rationale: Indicates quality.
4. What is the primary purpose of firmware update for touch panel?
A. Resolve no response
B. Increase confusion
C. Avoid intervention
D. Ignore intervention
Answer: A
Rationale: firmware update resolves no response.
5. What is the primary purpose of TCP/IP in audiovisual system?
A. Enable communication
B. Increase confusion
C. Avoid protocol
D. Ignore protocol
Answer: A
Rationale: TCP/IP enables communication.
AVIXA CTS Sample Exam Practice – Page 2
,6. What is the primary purpose of USB signal in video conferencing system?
A. Carry information
B. Increase confusion
C. Avoid signal
D. Ignore signal
Answer: A
Rationale: Carries information.
7. What is the primary purpose of control signal in control system?
A. Carry information
B. Increase confusion
C. Avoid signal
D. Ignore signal
Answer: A
Rationale: control signal carries information.
8. What is the primary purpose of processor in control system?
A. Process or display control signal
B. Increase confusion
C. Avoid device
D. Ignore device
Answer: A
Rationale: processor processes/displays control signal.
9. What is the primary purpose of touch panel in control system?
A. Process or display control signal
B. Increase confusion
C. Avoid device
D. Ignore device
Answer: A
Rationale: touch panel processes/displays control signal.
10. What is the primary purpose of IP network in audiovisual system?
A. Connect devices
B. Increase confusion
C. Avoid network
D. Ignore network
Answer: A
Rationale: Connects devices.
11. What is the primary purpose of audio system for amplifier?
A. Deliver audio signal
B. Increase confusion
C. Avoid system
D. Ignore system
Answer: A
Rationale: Delivers audio signal.
AVIXA CTS Sample Exam Practice – Page 3
, 12. What is the primary purpose of 1080p for display?
A. Indicate resolution or quality
B. Increase confusion
C. Avoid value
D. Ignore value
Answer: A
Rationale: 1080p indicates quality.
13. What is the primary purpose of camera in video conferencing system?
A. Process or display USB signal
B. Increase confusion
C. Avoid device
D. Ignore device
Answer: A
Rationale: Processes/displays USB signal.
14. What is the primary purpose of IP network in digital signage system?
A. Connect devices
B. Increase confusion
C. Avoid network
D. Ignore network
Answer: A
Rationale: IP network connects devices.
15. What is the primary purpose of HDMI signal in digital signage system?
A. Carry information
B. Increase confusion
C. Avoid signal
D. Ignore signal
Answer: A
Rationale: HDMI signal carries information.
16. What is the primary purpose of firmware update for camera?
A. Resolve no video
B. Increase confusion
C. Avoid intervention
D. Ignore intervention
Answer: A
Rationale: firmware update resolves no video.
17. What is the primary purpose of IP network in control system?
A. Connect devices
B. Increase confusion
C. Avoid network
D. Ignore network
Answer: A
Rationale: IP network connects devices.
AVIXA CTS Sample Exam Practice – Page 4
