Arizona CR31 Masonry Practice Exam
Masonry Materials, Construction Methods and Arizona Contractor Law
200 Multiple-Choice Practice Questions
with Answer Key and Explanations
2026 Edition
Arizona CR31 Masonry Practice Exam | Page 1
,Exam Overview
This is an independent, original practice set. It is not affiliated with the Arizona Registrar of Contractors and does
not reproduce state exam questions. Technical content follows general masonry practice and common codes
such as TMS 402/602 and ASTM standards; confirm classification scope, code editions and rule details with the
Registrar.
Exam Arizona CR31 Masonry Practice Exam
Intended for Candidates preparing for the Arizona Registrar of
Contractors CR31 masonry trade exam
Number of questions 200 multiple-choice (four options, one best answer)
Content areas 9
Suggested time 3 hours 20 minutes (about 60 seconds per question)
Suggested passing target 70% or higher (140 of 200) as a readiness target;
confirm the official passing score
Answer format The correct answer and explanation appear directly
after each question
Content Blueprint
Content area Questions Share of exam
Arizona Licensing and Business 22 11%
Law
Masonry Materials 22 11%
Mortar and Grout 22 11%
Layout, Tools and Bonding 22 11%
Brick, Block and Stone 22 11%
Construction
Reinforcement, Structural Design 22 11%
and Seismic
Weather, Moisture and Finishes 22 11%
Estimating, Plans and Inspection 22 11%
Safety and Job Management 24 12%
How to Use This Exam
Cover the answer lines with a sheet of paper and attempt each question before checking.
Work one content area at a time, or take all questions in one timed sitting to simulate test day.
Mark every question you miss or guess on, then reread its explanation and the related reference material.
Repeat the missed questions after a few days; aim to explain why each wrong option is wrong.
Reference Materials Used
Arizona contractor licensing concepts
TMS 402/602 masonry concepts
ASTM masonry material concepts
OSHA construction safety concepts
Arizona CR31 Masonry Practice Exam | Page 2
,Note: This is an independent practice resource written to the published content areas for this exam. It is not affiliated with or
endorsed by the testing organization, and it does not contain actual exam questions. Laws, codes, fees and guidelines change;
confirm current requirements with the official candidate handbook and references.
Arizona CR31 Masonry Practice Exam | Page 3
, Table of Contents
Exam Overview
Section 1: Arizona Licensing and Business Law (Questions 1–22)
Section 2: Masonry Materials (Questions 23–44)
Section 3: Mortar and Grout (Questions 45–66)
Section 4: Layout, Tools and Bonding (Questions 67–88)
Section 5: Brick, Block and Stone Construction (Questions 89–110)
Section 6: Reinforcement, Structural Design and Seismic (Questions 111–132)
Section 7: Weather, Moisture and Finishes (Questions 133–154)
Section 8: Estimating, Plans and Inspection (Questions 155–176)
Section 9: Safety and Job Management (Questions 177–200)
Answer Key Summary
Arizona CR31 Masonry Practice Exam | Page 4
Masonry Materials, Construction Methods and Arizona Contractor Law
200 Multiple-Choice Practice Questions
with Answer Key and Explanations
2026 Edition
Arizona CR31 Masonry Practice Exam | Page 1
,Exam Overview
This is an independent, original practice set. It is not affiliated with the Arizona Registrar of Contractors and does
not reproduce state exam questions. Technical content follows general masonry practice and common codes
such as TMS 402/602 and ASTM standards; confirm classification scope, code editions and rule details with the
Registrar.
Exam Arizona CR31 Masonry Practice Exam
Intended for Candidates preparing for the Arizona Registrar of
Contractors CR31 masonry trade exam
Number of questions 200 multiple-choice (four options, one best answer)
Content areas 9
Suggested time 3 hours 20 minutes (about 60 seconds per question)
Suggested passing target 70% or higher (140 of 200) as a readiness target;
confirm the official passing score
Answer format The correct answer and explanation appear directly
after each question
Content Blueprint
Content area Questions Share of exam
Arizona Licensing and Business 22 11%
Law
Masonry Materials 22 11%
Mortar and Grout 22 11%
Layout, Tools and Bonding 22 11%
Brick, Block and Stone 22 11%
Construction
Reinforcement, Structural Design 22 11%
and Seismic
Weather, Moisture and Finishes 22 11%
Estimating, Plans and Inspection 22 11%
Safety and Job Management 24 12%
How to Use This Exam
Cover the answer lines with a sheet of paper and attempt each question before checking.
Work one content area at a time, or take all questions in one timed sitting to simulate test day.
Mark every question you miss or guess on, then reread its explanation and the related reference material.
Repeat the missed questions after a few days; aim to explain why each wrong option is wrong.
Reference Materials Used
Arizona contractor licensing concepts
TMS 402/602 masonry concepts
ASTM masonry material concepts
OSHA construction safety concepts
Arizona CR31 Masonry Practice Exam | Page 2
,Note: This is an independent practice resource written to the published content areas for this exam. It is not affiliated with or
endorsed by the testing organization, and it does not contain actual exam questions. Laws, codes, fees and guidelines change;
confirm current requirements with the official candidate handbook and references.
Arizona CR31 Masonry Practice Exam | Page 3
, Table of Contents
Exam Overview
Section 1: Arizona Licensing and Business Law (Questions 1–22)
Section 2: Masonry Materials (Questions 23–44)
Section 3: Mortar and Grout (Questions 45–66)
Section 4: Layout, Tools and Bonding (Questions 67–88)
Section 5: Brick, Block and Stone Construction (Questions 89–110)
Section 6: Reinforcement, Structural Design and Seismic (Questions 111–132)
Section 7: Weather, Moisture and Finishes (Questions 133–154)
Section 8: Estimating, Plans and Inspection (Questions 155–176)
Section 9: Safety and Job Management (Questions 177–200)
Answer Key Summary
Arizona CR31 Masonry Practice Exam | Page 4