METAL COILS ENDORSEMENT (NYS) 2026 UPDATE|COMPLETE EXAM
SET QUESTIONS AND VERIFIED ANSWERS | GET IT 100%
ACCURATE!!| ALREADY PASSED A+
What types of commercial vehicles are required to comply with the cargo
securement regulations? - CORRECT ANSWER-trucks, truck tractors, semi-
trailers, full trailers and tractor-pole trailers with a gross vehicle weight rating
of more than 10,000 lbs.
What is the minimum amount of force that a cargo securement system should
be expected to withstand when traveling on a curve, ramp or when changing
lanes? - CORRECT ANSWER-The minimum side-to-side or lateral force = 50% of
the cargo weight when traveling on a curve or ramp, changing lanes or turning.
If an aluminum coil weighs 12,000 lbs., the load securement must provide
6,000 lbs. of securement to prevent movement in the rearward direction. How
is this performance criteria expressed in terms of gravity ("g")? - CORRECT
ANSWER-0.5 g.
What is the definition of Working Load Limit (WLL)? - CORRECT ANSWER-The
maximum load that may be applied to a component of a cargo securement
system during normal service; it is usually assigned by the manufacturer of the
component.
As required by state and federal regulations, who is responsible for proper load
securement? - CORRECT ANSWER-The motor carrier and driver.
A driver is required to check the cargo and its securing devices within how
many miles after beginning a trip? - CORRECT ANSWER-50 Miles
SET QUESTIONS AND VERIFIED ANSWERS | GET IT 100%
ACCURATE!!| ALREADY PASSED A+
What types of commercial vehicles are required to comply with the cargo
securement regulations? - CORRECT ANSWER-trucks, truck tractors, semi-
trailers, full trailers and tractor-pole trailers with a gross vehicle weight rating
of more than 10,000 lbs.
What is the minimum amount of force that a cargo securement system should
be expected to withstand when traveling on a curve, ramp or when changing
lanes? - CORRECT ANSWER-The minimum side-to-side or lateral force = 50% of
the cargo weight when traveling on a curve or ramp, changing lanes or turning.
If an aluminum coil weighs 12,000 lbs., the load securement must provide
6,000 lbs. of securement to prevent movement in the rearward direction. How
is this performance criteria expressed in terms of gravity ("g")? - CORRECT
ANSWER-0.5 g.
What is the definition of Working Load Limit (WLL)? - CORRECT ANSWER-The
maximum load that may be applied to a component of a cargo securement
system during normal service; it is usually assigned by the manufacturer of the
component.
As required by state and federal regulations, who is responsible for proper load
securement? - CORRECT ANSWER-The motor carrier and driver.
A driver is required to check the cargo and its securing devices within how
many miles after beginning a trip? - CORRECT ANSWER-50 Miles
