ASNT Level III Basic Exam (Sections 1 to 13) with all
Correct & 100% Verified Answers |Actual Complete
Update |Already Graded A+
Which of the following statements is true concerning the usage of SNT-TC-IA?
a. SNT-TC-1A is intended for use by a limited set of industrial segments
b. SNT-TC-1A was generated to satisfy the specification requirements of ASME
c. SNT-TC-1A is not intended to be used as a strict specification
d. SNT-TC-1A was last revised in 1988 ✔Correct Answer-SNT-TC-1A is not intended to be used
as a strict specification
The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A. The inquiry must
be: ✔Correct Answer-written and stated in general terms
Which of the following statements is true?
a. ASNT has been providing certification examinations for Level III personnel since the late
1960's.
b. SNT-TC-1A was first published in the late 1960's
c. SNT-TC-1A requires that Level III personnel be qualified and certified by ASNT
d. SNT-TC-1A was developed to satisfy requirements for NDT personnel qualification and
certification set forth in parts of the ASME Boiler and Pressure Vessel Code ✔Correct Answer-
SNT-TC-1A was first published in the 1960's
With regard to training of NDT personnel, the employer: ✔Correct Answer-may engage an
outside service who must conduct the training on the employer's premises
SNT-TC-1A is intended as a guideline for employers: ✔Correct Answer-to establish their own
written practice for the qualification and certification of their NDT personnel
The following is a statement in SNT-TC-1A: "It is recognized that these guidelines may not be
appropriate for certain employers, circumstances, and/or applications." What should be done if
the guidelines are not appropriate? ✔Correct Answer-The employer should review the
detailed recommendations and modify them, as necessary, to meet its particular needs with
justification documented in an annex to the written practice
Which of the following statements is true?
a. Qualification is the sum total of training and experience
b. The employer may not certify Level III personnel
c. A certifying agency is any organization used by an employer in training NDT personnel
d. Certification is written testimony of qualification ✔Correct Answer-certification is written
testimony of qualification
, Who should be responsible to assess whether or not an individual should be qualified and
certified who does not perform NDT, but monitors and evaluates NDT? ✔Correct Answer-The
individual's employer
In SNT-TC-1A (2020) holographic testing is a technique under which of the following NDT
methods?
a. visual testing
b. guided wave testing
c. acoustic emission testing
d. laser testing ✔Correct Answer-Laser testing
ASNT intended that the recommendations of SNT-TC-1A be applied ✔Correct Answer-with
flexibility and reason
Of the following, which is most appropriate to determine the needs to qualify and certify
personnel whose only NDT function is to operate digital thickness equipment?
a. ASNT
b. ASME
c. The employer
d. The customer ✔Correct Answer-The employer
Certification is: ✔Correct Answer-written testimony of qualification
Use of SNT-TC-1A is mandatory when: ✔Correct Answer-It has been specified by the
customer.
The basic levels of qualification recommended by SNT-TC-1A are: ✔Correct Answer-Level I,
Level II, Level III
Should personnel who operate ultrasonic digital thickness measurement equipment be qualified
and certified? ✔Correct Answer-Whether any NDT personnel should be qualified and certified
depends on the needs of the employer and the requirements of the employer's customers or
clientele
According to the recommendations of SNT-TC-1A, what is true concerning a trainees activities?
✔Correct Answer-the trainee may not conduct nondestructive tests independently and may not
report test results
According to SNT-TC-1A (2020), what is mandatory for certification of a Level III? ✔Correct
Answer-shall meet the requirements of the employer's written practice
According to written instructions, an NDT level I may: ✔Correct Answer-perform specific
calibrations, specific nondestructive tests, and specific evaluations
Correct & 100% Verified Answers |Actual Complete
Update |Already Graded A+
Which of the following statements is true concerning the usage of SNT-TC-IA?
a. SNT-TC-1A is intended for use by a limited set of industrial segments
b. SNT-TC-1A was generated to satisfy the specification requirements of ASME
c. SNT-TC-1A is not intended to be used as a strict specification
d. SNT-TC-1A was last revised in 1988 ✔Correct Answer-SNT-TC-1A is not intended to be used
as a strict specification
The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A. The inquiry must
be: ✔Correct Answer-written and stated in general terms
Which of the following statements is true?
a. ASNT has been providing certification examinations for Level III personnel since the late
1960's.
b. SNT-TC-1A was first published in the late 1960's
c. SNT-TC-1A requires that Level III personnel be qualified and certified by ASNT
d. SNT-TC-1A was developed to satisfy requirements for NDT personnel qualification and
certification set forth in parts of the ASME Boiler and Pressure Vessel Code ✔Correct Answer-
SNT-TC-1A was first published in the 1960's
With regard to training of NDT personnel, the employer: ✔Correct Answer-may engage an
outside service who must conduct the training on the employer's premises
SNT-TC-1A is intended as a guideline for employers: ✔Correct Answer-to establish their own
written practice for the qualification and certification of their NDT personnel
The following is a statement in SNT-TC-1A: "It is recognized that these guidelines may not be
appropriate for certain employers, circumstances, and/or applications." What should be done if
the guidelines are not appropriate? ✔Correct Answer-The employer should review the
detailed recommendations and modify them, as necessary, to meet its particular needs with
justification documented in an annex to the written practice
Which of the following statements is true?
a. Qualification is the sum total of training and experience
b. The employer may not certify Level III personnel
c. A certifying agency is any organization used by an employer in training NDT personnel
d. Certification is written testimony of qualification ✔Correct Answer-certification is written
testimony of qualification
, Who should be responsible to assess whether or not an individual should be qualified and
certified who does not perform NDT, but monitors and evaluates NDT? ✔Correct Answer-The
individual's employer
In SNT-TC-1A (2020) holographic testing is a technique under which of the following NDT
methods?
a. visual testing
b. guided wave testing
c. acoustic emission testing
d. laser testing ✔Correct Answer-Laser testing
ASNT intended that the recommendations of SNT-TC-1A be applied ✔Correct Answer-with
flexibility and reason
Of the following, which is most appropriate to determine the needs to qualify and certify
personnel whose only NDT function is to operate digital thickness equipment?
a. ASNT
b. ASME
c. The employer
d. The customer ✔Correct Answer-The employer
Certification is: ✔Correct Answer-written testimony of qualification
Use of SNT-TC-1A is mandatory when: ✔Correct Answer-It has been specified by the
customer.
The basic levels of qualification recommended by SNT-TC-1A are: ✔Correct Answer-Level I,
Level II, Level III
Should personnel who operate ultrasonic digital thickness measurement equipment be qualified
and certified? ✔Correct Answer-Whether any NDT personnel should be qualified and certified
depends on the needs of the employer and the requirements of the employer's customers or
clientele
According to the recommendations of SNT-TC-1A, what is true concerning a trainees activities?
✔Correct Answer-the trainee may not conduct nondestructive tests independently and may not
report test results
According to SNT-TC-1A (2020), what is mandatory for certification of a Level III? ✔Correct
Answer-shall meet the requirements of the employer's written practice
According to written instructions, an NDT level I may: ✔Correct Answer-perform specific
calibrations, specific nondestructive tests, and specific evaluations
