1
Globus 201 Training Entrance Exam 200
Multiple Choice Practice Questions with
Verified Answers and Detailed
Rationales for 2026-2027 Certification
Success
SECTION 1: CREO SYSTEM SPECIFICATIONS (Questions 1–40)
Question 1
What is the torque specification for the CREO non-threaded system?
A) 4.5 Nm
B) 5.5 Nm
C) 6.5 Nm
D) 7.5 Nm
Correct Answer: B
Rationale: The CREO non-threaded system requires 5.5 Nm of torque for final tightening. This
specification ensures proper locking of the screw to the rod without over-torquing and
damaging the implant .
Question 2
How many millimeters of reduction does the CREO clip reducer offer?
A) 20mm
B) 25mm
,2
C) 30mm
D) 35mm
Correct Answer: C
Rationale: The CREO clip reducer offers 30mm of reduction capability, allowing surgeons to
reduce spondylolisthesis and restore spinal alignment during posterior fixation procedures .
Question 3
What is the profile diameter of the CREO Threaded system?
A) 14mm
B) 15mm
C) 16mm
D) 17mm
Correct Answer: C
Rationale: The CREO Threaded system features a 16mm profile diameter, which refers to the
outer diameter of the threaded portion of the screw .
Question 4
CREO Uniplanar screws offer how many degrees of angulation in the cranial-caudal direction?
A) ±10°
B) ±15°
C) ±20°
D) ±25°
Correct Answer: C
,3
Rationale: CREO Uniplanar screws offer ±20° of angulation in the cranial-caudal direction,
providing flexibility for screw placement while maintaining a fixed medial-lateral trajectory .
Question 5
What lengths are available for CREO Threaded curved rods?
A) 10mm–100mm
B) 20mm–150mm
C) 30mm–200mm
D) 40mm–250mm
Correct Answer: B
Rationale: CREO Threaded curved rods are offered in lengths ranging from 20mm to 150mm,
accommodating various spinal constructs .
Question 6
How many reduction options are available with CREO Non-Threaded screws?
A) 2 options
B) 3 options
C) 4 options
D) 5 options
Correct Answer: C
Rationale: CREO Non-Threaded screws offer 4 reduction options, allowing surgeons to
progressively reduce the rod to the screw head during deformity correction and
spondylolisthesis reduction .
, 4
Question 7
What is the torque of the threaded locking cap for CREO-MIS?
A) 6 Nm
B) 7 Nm
C) 8 Nm
D) 9 Nm
Correct Answer: C
Rationale: The threaded locking cap for CREO-MIS requires 8 Nm of torque for final tightening,
ensuring secure fixation of the rod to the screw .
Question 8
What is the diameter of the extended screw head on CREO-MIS?
A) 10.5mm
B) 11.5mm
C) 12.9mm
D) 14.0mm
Correct Answer: C
Rationale: The extended screw head on CREO-MIS has a diameter of 12.9mm. This extended
head design facilitates percutaneous screw placement and rod insertion through minimally
invasive approaches .
Question 9
CREO-MIS: The extended screw heads come in which reduction options?
Globus 201 Training Entrance Exam 200
Multiple Choice Practice Questions with
Verified Answers and Detailed
Rationales for 2026-2027 Certification
Success
SECTION 1: CREO SYSTEM SPECIFICATIONS (Questions 1–40)
Question 1
What is the torque specification for the CREO non-threaded system?
A) 4.5 Nm
B) 5.5 Nm
C) 6.5 Nm
D) 7.5 Nm
Correct Answer: B
Rationale: The CREO non-threaded system requires 5.5 Nm of torque for final tightening. This
specification ensures proper locking of the screw to the rod without over-torquing and
damaging the implant .
Question 2
How many millimeters of reduction does the CREO clip reducer offer?
A) 20mm
B) 25mm
,2
C) 30mm
D) 35mm
Correct Answer: C
Rationale: The CREO clip reducer offers 30mm of reduction capability, allowing surgeons to
reduce spondylolisthesis and restore spinal alignment during posterior fixation procedures .
Question 3
What is the profile diameter of the CREO Threaded system?
A) 14mm
B) 15mm
C) 16mm
D) 17mm
Correct Answer: C
Rationale: The CREO Threaded system features a 16mm profile diameter, which refers to the
outer diameter of the threaded portion of the screw .
Question 4
CREO Uniplanar screws offer how many degrees of angulation in the cranial-caudal direction?
A) ±10°
B) ±15°
C) ±20°
D) ±25°
Correct Answer: C
,3
Rationale: CREO Uniplanar screws offer ±20° of angulation in the cranial-caudal direction,
providing flexibility for screw placement while maintaining a fixed medial-lateral trajectory .
Question 5
What lengths are available for CREO Threaded curved rods?
A) 10mm–100mm
B) 20mm–150mm
C) 30mm–200mm
D) 40mm–250mm
Correct Answer: B
Rationale: CREO Threaded curved rods are offered in lengths ranging from 20mm to 150mm,
accommodating various spinal constructs .
Question 6
How many reduction options are available with CREO Non-Threaded screws?
A) 2 options
B) 3 options
C) 4 options
D) 5 options
Correct Answer: C
Rationale: CREO Non-Threaded screws offer 4 reduction options, allowing surgeons to
progressively reduce the rod to the screw head during deformity correction and
spondylolisthesis reduction .
, 4
Question 7
What is the torque of the threaded locking cap for CREO-MIS?
A) 6 Nm
B) 7 Nm
C) 8 Nm
D) 9 Nm
Correct Answer: C
Rationale: The threaded locking cap for CREO-MIS requires 8 Nm of torque for final tightening,
ensuring secure fixation of the rod to the screw .
Question 8
What is the diameter of the extended screw head on CREO-MIS?
A) 10.5mm
B) 11.5mm
C) 12.9mm
D) 14.0mm
Correct Answer: C
Rationale: The extended screw head on CREO-MIS has a diameter of 12.9mm. This extended
head design facilitates percutaneous screw placement and rod insertion through minimally
invasive approaches .
Question 9
CREO-MIS: The extended screw heads come in which reduction options?
