GEORGIA ELECTRICAL CONTRACTOR CLASS II (UNRESTRICTED) EXAMINATION– QUESTIONS AND ANSWERS |
VERIFIED AND WELL DETAILED ANSWERS | PLUS RATIONALES | DOWNLOAD AND PASS | LATEST EXAM UPDATE
2026/2027
Core Domains
NEC Code Calculations and Load Analysis
Wiring Methods, Materials, and Installation Standards
Grounding, Bonding, and Overcurrent Protection
Motors, Generators, and HVAC Equipment Controls
Special Occupancies and Hazardous Locations
Georgia Electrical Contractor Licensing Law and Rules
Business Practices, Project Management, and Ethics
OSHA Construction Safety and CFR Compliance
Introduction
,The Georgia Electrical Contractor Class II (Unrestricted) examination assesses the competency of applicants seeking
licensure to perform electrical contracting work without restriction on system size or phase. This comprehensive
assessment evaluates mastery of the National Electrical Code, Georgia-specific licensing regulations, business law, and
field safety practices. Questions utilize multiple-choice and scenario-based formats to simulate real-world decision-
making. Candidates must demonstrate foundational theory, applied professional knowledge, and the critical thinking
skills necessary to supervise installations, ensure code compliance, and protect public welfare. This test bank
emphasizes practical application and regulatory adherence required for unrestricted electrical contracting in Georgia.
SECTION ONE: QUESTIONS 1–50
1. According to Georgia Rule 121-2-.01, applicants for a statewide Class II electrical contractor license must
document a minimum of how many years of experience in the electrical field?
A. 2 years
B. 3 years
C. 4 years
D. 6 years
🟢 Correct Answer: C. 4 years
,🔴 Explanation: Georgia Rule 121-2-.01(2) requires applicants for a statewide electrical contractor license to be a
minimum of 21 years old and document a minimum of 4 years experience in the electrical field as would be covered
by the Georgia Electrical Code or the National Electrical Code .
2. What is the maximum allowable voltage drop for a branch circuit according to NEC recommendations for
reasonable efficiency of operation?
A. 3%
B. 5%
C. 7%
D. 10%
🟢 Correct Answer: A. 3%
🔴 Explanation: NEC 210.19(A) Informational Note No. 4 recommends that branch circuits be sized to prevent a
voltage drop exceeding 3% at the farthest outlet of power, heating, and lighting loads, or combinations of such
loads .
, 3. Georgia Rule 121-4-.05 requires electrical contractors to complete how many hours of continuing education
per year prior to license renewal?
A. 2 hours
B. 4 hours
C. 6 hours
D. 8 hours
🟢 Correct Answer: B. 4 hours
🔴 Explanation: Georgia Rule 121-4-.05(2) states that any applicant for renewal of an electrical contractor license is
required to complete four (4) hours of continuing education per year .
4. When installing a 3-phase, 480-volt motor with a full-load current of 52 amperes, what is the minimum
branch-circuit conductor ampacity required for a continuous-duty motor?
A. 52 amperes
B. 62.4 amperes
C. 65 amperes
D. 78 amperes
VERIFIED AND WELL DETAILED ANSWERS | PLUS RATIONALES | DOWNLOAD AND PASS | LATEST EXAM UPDATE
2026/2027
Core Domains
NEC Code Calculations and Load Analysis
Wiring Methods, Materials, and Installation Standards
Grounding, Bonding, and Overcurrent Protection
Motors, Generators, and HVAC Equipment Controls
Special Occupancies and Hazardous Locations
Georgia Electrical Contractor Licensing Law and Rules
Business Practices, Project Management, and Ethics
OSHA Construction Safety and CFR Compliance
Introduction
,The Georgia Electrical Contractor Class II (Unrestricted) examination assesses the competency of applicants seeking
licensure to perform electrical contracting work without restriction on system size or phase. This comprehensive
assessment evaluates mastery of the National Electrical Code, Georgia-specific licensing regulations, business law, and
field safety practices. Questions utilize multiple-choice and scenario-based formats to simulate real-world decision-
making. Candidates must demonstrate foundational theory, applied professional knowledge, and the critical thinking
skills necessary to supervise installations, ensure code compliance, and protect public welfare. This test bank
emphasizes practical application and regulatory adherence required for unrestricted electrical contracting in Georgia.
SECTION ONE: QUESTIONS 1–50
1. According to Georgia Rule 121-2-.01, applicants for a statewide Class II electrical contractor license must
document a minimum of how many years of experience in the electrical field?
A. 2 years
B. 3 years
C. 4 years
D. 6 years
🟢 Correct Answer: C. 4 years
,🔴 Explanation: Georgia Rule 121-2-.01(2) requires applicants for a statewide electrical contractor license to be a
minimum of 21 years old and document a minimum of 4 years experience in the electrical field as would be covered
by the Georgia Electrical Code or the National Electrical Code .
2. What is the maximum allowable voltage drop for a branch circuit according to NEC recommendations for
reasonable efficiency of operation?
A. 3%
B. 5%
C. 7%
D. 10%
🟢 Correct Answer: A. 3%
🔴 Explanation: NEC 210.19(A) Informational Note No. 4 recommends that branch circuits be sized to prevent a
voltage drop exceeding 3% at the farthest outlet of power, heating, and lighting loads, or combinations of such
loads .
, 3. Georgia Rule 121-4-.05 requires electrical contractors to complete how many hours of continuing education
per year prior to license renewal?
A. 2 hours
B. 4 hours
C. 6 hours
D. 8 hours
🟢 Correct Answer: B. 4 hours
🔴 Explanation: Georgia Rule 121-4-.05(2) states that any applicant for renewal of an electrical contractor license is
required to complete four (4) hours of continuing education per year .
4. When installing a 3-phase, 480-volt motor with a full-load current of 52 amperes, what is the minimum
branch-circuit conductor ampacity required for a continuous-duty motor?
A. 52 amperes
B. 62.4 amperes
C. 65 amperes
D. 78 amperes
