Hawaii C-22 Glazing
and Tinting
Contractor Exam Prep
: Elite Universal
Test Bank
PART 0: THE TABLE OF CONTENTS
● PART I: THE PREVIEW
○ The Intro
○ The "Critical Axioms" Cheat Sheet
● PART II: THE ELITE TEST BANK
○ Tier 1 (Questions 1–18) - Foundational Syntax & Application
○ Tier 2 (Questions 19–37) - Complex Application & Simulation
○ Tier 3 (Questions 38–55) - Grandmaster Synthesis
PART I: THE PREVIEW
Mastering this test bank translates directly to elite operational competence, forging candidates
who approach commercial glazing and tinting with flawless regulatory, structural, and
thermodynamic precision. By internalizing these engineered scenarios, the practitioner develops
the analytical stamina required to execute high-stakes projects within Hawaii's unforgiving
environmental and legal landscape.
The "Critical Axioms" Cheat Sheet
Parameter Regulatory / Engineering Core Application Metric
Standard
Licensing HRS 444 / HAR 16-77 4 years supervisory experience
required; $1,500 aggregate
threshold.
Reciprocity Hawaii DCCA / PSI Zero reciprocity; all applicants
must pass Hawaii-specific PSI
exams.
GTF (Short) ASTM E1300 Annealed: 1.0;
,Parameter Regulatory / Engineering Core Application Metric
Standard
Heat-Strengthened: 2.0; Fully
Tempered: 4.0.
Safety Glazing ASTM C1048 Kind FT (Tempered) must
exceed 10,000 psi surface
compression.
Sedan Tint HRS 291-21.5 Front, Back, and Rear windows
must meter >35% VLT.
SUV/Van Tint HRS 291-21.5 Front >35% VLT; Back and
Rear windows permit any
darkness.
Setting Blocks GANA Glazing Manual Placed at L/4 (quarter points);
Hardness of 80–90 Shore A.
Wind Load ASCE 7-22 (Hawaii) Minimum 130 mph Special
Wind Region floor; deflection
limit L/175.
Lifting Safety ASME B30.20 Vacuum lifters demand a
structural safety factor of 4.0
and 65% minimum vacuum.
PART II: THE ELITE TEST BANK
Tier 1 (Questions 1–18) - Foundational Syntax & Application
Q1: An applicant submits a C-22 Glazing Contractor application to the Hawaii Department of
Commerce and Consumer Affairs. The applicant holds a valid NASCLA Accredited Examination
score and 15 years of continuous licensure in California. Based on Hawaii's licensing
framework, which administrative outcome is MOST ACCURATE?
A) The application is approved under interstate reciprocity clauses.
B) The application is approved for the Trade exam, but the Hawaii Business and Law Exam is
still required.
C) The application is rejected because Hawaii requires passing the PSI-administered Hawaii
Trade and Business exams exclusively.
D) The application is granted a provisional 6-month license pending NASCLA verification.
● Answer: C (The application is rejected because Hawaii requires passing the
PSI-administered Hawaii Trade and Business exams exclusively)
● Distractor Analysis:
○ A is incorrect: Hawaii categorically denies contractor license reciprocity with any
other state, prioritizing localized code fluency.
○ B is incorrect: The state does not accept NASCLA scores for trade classifications;
both parts must be taken via the contracted PSI network.
○ D is incorrect: Provisional licensing protocols for out-of-state exams do not exist; full
PSI testing is a strict statutory prerequisite.
The Mentor's Analysis: Jurisdictional licensing statutes are calculated mechanisms to enforce
localized code compliance and isolate liability. When facing out-of-state credentials, the
immediate priority is understanding that geographic isolation nullifies mainland reciprocity. By
, utilizing the mandated PSI testing protocol, you bypass the common trap of assuming
administrative universality, recognizing that Hawaii’s unique structural environment demands
native vetting. Professional Intuition: All mainland credentials are void in Hawaii; the
DCCA strictly mandates state-administered PSI examinations to ensure fluency in
isolated environmental codes.
Q2: A C-22 contractor is hired to install window tinting on a multi-purpose vehicle (SUV). The
client requests a 5% VLT film on the front side windows, back side windows, and rear
windshield. Under HRS 291-21.5, which action is the REQUIRED path for legal compliance?
A) Proceed with the installation as requested, provided the vehicle is equipped with dual side
mirrors.
B) Install the 5% film on the back side windows and rear windshield, but restrict the front side
windows to a minimum of 35% VLT.
C) Deny the 5% film entirely, as all windows on all vehicle classes must maintain >35% VLT.
D) Install the 5% film on all requested windows only after verifying a valid medical exemption
certificate.
● Answer: B (Install the 5% film on the back side windows and rear windshield, but restrict
the front side windows to a minimum of 35% VLT)
● Distractor Analysis:
○ A is incorrect: The front side windows on any vehicle, including SUVs, cannot
legally fall below the 35% VLT threshold.
○ C is incorrect: SUVs and vans are granted statutory exemptions permitting any
darkness on back side and rear windows.
○ D is incorrect: Hawaii law explicitly prohibits medical exemptions for special tint
variations, closing this common loophole.
The Mentor's Analysis: Traffic safety statutes distinguish heavily between passenger sedans
and multi-purpose vehicles to balance driver visibility with cargo security. When facing
automotive tinting requests, the immediate priority is identifying the vehicle's legal classification.
By utilizing the specific exemptions for SUV rear compartments, the contractor bypasses the
common trap of misapplying sedan restrictions to all vehicles, maximizing client satisfaction
without incurring Department of Transportation fines. Professional Intuition: SUV rear
compartments are exempt from darkness limits, but front-side windows strictly require
>35% VLT across all vehicle classes.
Q3: According to ASTM E1300, when designing a monolithic glass panel for a short-duration
wind load, which Glass Type Factor (GTF) is CORRECTLY assigned to Fully Tempered (FT)
glass?
A) 1.0
B) 2.0
C) 3.0
D) 4.0
● Answer: D (4.0)
● Distractor Analysis:
○ A is incorrect: 1.0 is the foundational multiplier for Annealed (AN) glass.
○ B is incorrect: 2.0 is the multiplier for Heat-Strengthened (HS) glass.
○ C is incorrect: 3.0 is a fabricated metric that does not align with any monolithic GTF
standard values.
The Mentor's Analysis: Structural load calculations rely on standardized multipliers to
mathematically predict material failure under dynamic wind pressure. When facing
short-duration wind loads, the immediate priority is selecting the appropriate GTF multiplier
and Tinting
Contractor Exam Prep
: Elite Universal
Test Bank
PART 0: THE TABLE OF CONTENTS
● PART I: THE PREVIEW
○ The Intro
○ The "Critical Axioms" Cheat Sheet
● PART II: THE ELITE TEST BANK
○ Tier 1 (Questions 1–18) - Foundational Syntax & Application
○ Tier 2 (Questions 19–37) - Complex Application & Simulation
○ Tier 3 (Questions 38–55) - Grandmaster Synthesis
PART I: THE PREVIEW
Mastering this test bank translates directly to elite operational competence, forging candidates
who approach commercial glazing and tinting with flawless regulatory, structural, and
thermodynamic precision. By internalizing these engineered scenarios, the practitioner develops
the analytical stamina required to execute high-stakes projects within Hawaii's unforgiving
environmental and legal landscape.
The "Critical Axioms" Cheat Sheet
Parameter Regulatory / Engineering Core Application Metric
Standard
Licensing HRS 444 / HAR 16-77 4 years supervisory experience
required; $1,500 aggregate
threshold.
Reciprocity Hawaii DCCA / PSI Zero reciprocity; all applicants
must pass Hawaii-specific PSI
exams.
GTF (Short) ASTM E1300 Annealed: 1.0;
,Parameter Regulatory / Engineering Core Application Metric
Standard
Heat-Strengthened: 2.0; Fully
Tempered: 4.0.
Safety Glazing ASTM C1048 Kind FT (Tempered) must
exceed 10,000 psi surface
compression.
Sedan Tint HRS 291-21.5 Front, Back, and Rear windows
must meter >35% VLT.
SUV/Van Tint HRS 291-21.5 Front >35% VLT; Back and
Rear windows permit any
darkness.
Setting Blocks GANA Glazing Manual Placed at L/4 (quarter points);
Hardness of 80–90 Shore A.
Wind Load ASCE 7-22 (Hawaii) Minimum 130 mph Special
Wind Region floor; deflection
limit L/175.
Lifting Safety ASME B30.20 Vacuum lifters demand a
structural safety factor of 4.0
and 65% minimum vacuum.
PART II: THE ELITE TEST BANK
Tier 1 (Questions 1–18) - Foundational Syntax & Application
Q1: An applicant submits a C-22 Glazing Contractor application to the Hawaii Department of
Commerce and Consumer Affairs. The applicant holds a valid NASCLA Accredited Examination
score and 15 years of continuous licensure in California. Based on Hawaii's licensing
framework, which administrative outcome is MOST ACCURATE?
A) The application is approved under interstate reciprocity clauses.
B) The application is approved for the Trade exam, but the Hawaii Business and Law Exam is
still required.
C) The application is rejected because Hawaii requires passing the PSI-administered Hawaii
Trade and Business exams exclusively.
D) The application is granted a provisional 6-month license pending NASCLA verification.
● Answer: C (The application is rejected because Hawaii requires passing the
PSI-administered Hawaii Trade and Business exams exclusively)
● Distractor Analysis:
○ A is incorrect: Hawaii categorically denies contractor license reciprocity with any
other state, prioritizing localized code fluency.
○ B is incorrect: The state does not accept NASCLA scores for trade classifications;
both parts must be taken via the contracted PSI network.
○ D is incorrect: Provisional licensing protocols for out-of-state exams do not exist; full
PSI testing is a strict statutory prerequisite.
The Mentor's Analysis: Jurisdictional licensing statutes are calculated mechanisms to enforce
localized code compliance and isolate liability. When facing out-of-state credentials, the
immediate priority is understanding that geographic isolation nullifies mainland reciprocity. By
, utilizing the mandated PSI testing protocol, you bypass the common trap of assuming
administrative universality, recognizing that Hawaii’s unique structural environment demands
native vetting. Professional Intuition: All mainland credentials are void in Hawaii; the
DCCA strictly mandates state-administered PSI examinations to ensure fluency in
isolated environmental codes.
Q2: A C-22 contractor is hired to install window tinting on a multi-purpose vehicle (SUV). The
client requests a 5% VLT film on the front side windows, back side windows, and rear
windshield. Under HRS 291-21.5, which action is the REQUIRED path for legal compliance?
A) Proceed with the installation as requested, provided the vehicle is equipped with dual side
mirrors.
B) Install the 5% film on the back side windows and rear windshield, but restrict the front side
windows to a minimum of 35% VLT.
C) Deny the 5% film entirely, as all windows on all vehicle classes must maintain >35% VLT.
D) Install the 5% film on all requested windows only after verifying a valid medical exemption
certificate.
● Answer: B (Install the 5% film on the back side windows and rear windshield, but restrict
the front side windows to a minimum of 35% VLT)
● Distractor Analysis:
○ A is incorrect: The front side windows on any vehicle, including SUVs, cannot
legally fall below the 35% VLT threshold.
○ C is incorrect: SUVs and vans are granted statutory exemptions permitting any
darkness on back side and rear windows.
○ D is incorrect: Hawaii law explicitly prohibits medical exemptions for special tint
variations, closing this common loophole.
The Mentor's Analysis: Traffic safety statutes distinguish heavily between passenger sedans
and multi-purpose vehicles to balance driver visibility with cargo security. When facing
automotive tinting requests, the immediate priority is identifying the vehicle's legal classification.
By utilizing the specific exemptions for SUV rear compartments, the contractor bypasses the
common trap of misapplying sedan restrictions to all vehicles, maximizing client satisfaction
without incurring Department of Transportation fines. Professional Intuition: SUV rear
compartments are exempt from darkness limits, but front-side windows strictly require
>35% VLT across all vehicle classes.
Q3: According to ASTM E1300, when designing a monolithic glass panel for a short-duration
wind load, which Glass Type Factor (GTF) is CORRECTLY assigned to Fully Tempered (FT)
glass?
A) 1.0
B) 2.0
C) 3.0
D) 4.0
● Answer: D (4.0)
● Distractor Analysis:
○ A is incorrect: 1.0 is the foundational multiplier for Annealed (AN) glass.
○ B is incorrect: 2.0 is the multiplier for Heat-Strengthened (HS) glass.
○ C is incorrect: 3.0 is a fabricated metric that does not align with any monolithic GTF
standard values.
The Mentor's Analysis: Structural load calculations rely on standardized multipliers to
mathematically predict material failure under dynamic wind pressure. When facing
short-duration wind loads, the immediate priority is selecting the appropriate GTF multiplier
