Traffic Supervisor Exam 2026/2027 |
Comprehensive Study Guide & Practice
Test
Is a shadow vehicle used in all traffic zones?
A. True
B. False - correct answer-False
The shadow vehicle is occupied whenever workers are in the work area.
A. True
B. False - correct answer-False
What class one light is the shadow vehicle equipped with?
A. Flashing Yellow Light
B. Oscillating Yellow Light
C. Yellow Strobe Light
D. All of the above - correct answer-All of the above
When may cones be substituted for drums?
A. Daytime traffic control minimum height 18"
,B. Daytime traffic control minimum height 28"
C. Daytime traffic control minimum height 36"
D. Daytime traffic control minimum height 42" - correct answer-Daytime traffic
control minimum height 28"
When may cones be substituted for drums?
A. Daytime traffic control minimum height 18"
B. Daytime traffic control minimum height 28"
C. Daytime traffic control minimum height 36"
D. Daytime traffic control minimum height 42" - correct answer-Daytime traffic
control minimum height 28"
When cones are substituted for drums for nighttime closers, what is the minimum
cone height requirement?
A. 18"
B. 28"
C. 36"
D. 42" - correct answer-42"
When cones are substituted for drums at nighttime closer, what is the maximum
cone spacing?
A. 20'
B. 30'
C. 40'
D. 50' - correct answer-40'
,What type of flashing warning lights are required when there is a nighttime lane
closer?
A. ROAD WORK AHEAD
B. LANE CLOSED AHEAD
C. A & B
D. NONE OF THE ABOVE - correct answer-ROAD WORK AHEAD
&
LANE CLOSED AHEAD
If there is a lane closure of greater than three days, what is required?
A. Work zone dotted lines, 4' in length separated by 10' gaps, shall be provided to
identify the merge.
B. The appropriate color work zone edge lines shall be applied along the taper and
tangent sections.
C. All the above
D. None of the above - correct answer-The appropriate color work zone edge
lines shall be applied along the taper and tangent sections.
Work zone pavement marking that conflict with final traffic lanes shall be
temporary paint.
A. True
B. False - correct answer-False
What are the extra advance warning signs?
A. Lane Close Ahead
B. Watch for Stopped Traffic
, C. Road Work Ahead
D. All the above - correct answer-Lane Change Ahead
&
Watch for Stopped Traffic
&
Road Work Ahead
Is the advisory speed plaque used in all traffic zones?
A. True
B. False - correct answer-False
When the approach speed limit is 40 mph or less, 36" warning signs may be used.
A. True
B. False - correct answer-True
Road Work Ahead signs shall be provided on entrance ramps or roadways
entering the work limits.
A. True
B. False - correct answer-True
End Road Work signs are only required for lane closures of more than ______ day.
A. 1
B. 2
C. 3
D 4 - correct answer-1
Comprehensive Study Guide & Practice
Test
Is a shadow vehicle used in all traffic zones?
A. True
B. False - correct answer-False
The shadow vehicle is occupied whenever workers are in the work area.
A. True
B. False - correct answer-False
What class one light is the shadow vehicle equipped with?
A. Flashing Yellow Light
B. Oscillating Yellow Light
C. Yellow Strobe Light
D. All of the above - correct answer-All of the above
When may cones be substituted for drums?
A. Daytime traffic control minimum height 18"
,B. Daytime traffic control minimum height 28"
C. Daytime traffic control minimum height 36"
D. Daytime traffic control minimum height 42" - correct answer-Daytime traffic
control minimum height 28"
When may cones be substituted for drums?
A. Daytime traffic control minimum height 18"
B. Daytime traffic control minimum height 28"
C. Daytime traffic control minimum height 36"
D. Daytime traffic control minimum height 42" - correct answer-Daytime traffic
control minimum height 28"
When cones are substituted for drums for nighttime closers, what is the minimum
cone height requirement?
A. 18"
B. 28"
C. 36"
D. 42" - correct answer-42"
When cones are substituted for drums at nighttime closer, what is the maximum
cone spacing?
A. 20'
B. 30'
C. 40'
D. 50' - correct answer-40'
,What type of flashing warning lights are required when there is a nighttime lane
closer?
A. ROAD WORK AHEAD
B. LANE CLOSED AHEAD
C. A & B
D. NONE OF THE ABOVE - correct answer-ROAD WORK AHEAD
&
LANE CLOSED AHEAD
If there is a lane closure of greater than three days, what is required?
A. Work zone dotted lines, 4' in length separated by 10' gaps, shall be provided to
identify the merge.
B. The appropriate color work zone edge lines shall be applied along the taper and
tangent sections.
C. All the above
D. None of the above - correct answer-The appropriate color work zone edge
lines shall be applied along the taper and tangent sections.
Work zone pavement marking that conflict with final traffic lanes shall be
temporary paint.
A. True
B. False - correct answer-False
What are the extra advance warning signs?
A. Lane Close Ahead
B. Watch for Stopped Traffic
, C. Road Work Ahead
D. All the above - correct answer-Lane Change Ahead
&
Watch for Stopped Traffic
&
Road Work Ahead
Is the advisory speed plaque used in all traffic zones?
A. True
B. False - correct answer-False
When the approach speed limit is 40 mph or less, 36" warning signs may be used.
A. True
B. False - correct answer-True
Road Work Ahead signs shall be provided on entrance ramps or roadways
entering the work limits.
A. True
B. False - correct answer-True
End Road Work signs are only required for lane closures of more than ______ day.
A. 1
B. 2
C. 3
D 4 - correct answer-1
