ASA 114 COMPLETE COURSE REVIEW GUIDE
◉ A forward projection of the Bridgedeck designed to soften the
impact of the seas is called a ____________
Answer: Nacelle
◉ On catamarans without fixed keels, a _________ slides vertically
through a trunk in each hull to provide lateral resistance and
improved performance when sailing into _______________
Answer: Daggerboard, windward
◉ A catamaran's _______________ is derived from the buoyancy in its
two widely separated hulls. Even so, care must be taken to avoid
overloading, and distribute the weight ________
Answer: Stability, evenly
◉ Located on the forward crossbeam the ____________ _____________
provides reinforcement to counter the effect of forestay tension
Answer: Seagull striker
◉ The downward force of the catamaran's mast is supported by the
center___________ integrated into the Bridgedeck structure. The
Mainsheet traveler is often mounted over the _____________ crossbeam
, Answer: Crossbeam, aft
◉ A typical cruising catamaran sail plan consists of a large __________ -
_________ mainsail and a roller-furling jib.
Answer: Fully-Battened
◉ When a catamaran's steering wheel is turned, the __________
operate together because they are connected by a tie rod. They are
smaller than those on a monohull, but their efficiency is increased
due to the lack of __________.
Answer: Rudders, Heeling
◉ Name four systems or components that must be duplicated on a
catamaran: _________, ____________,_____________,_____________
Answer: Engines, running gear, cooling exhaust, electrical, fuel, bilge
pumps
◉ An engine's ______________ battery is generally collocated with the
engine and charged by an ____________on the same engine
Answer: Start, alternator
◉ Take care to ensure that the levels in the ___________ and ___________
tanks are balanced, especially if they are located away from the
boat's centerline.
◉ A forward projection of the Bridgedeck designed to soften the
impact of the seas is called a ____________
Answer: Nacelle
◉ On catamarans without fixed keels, a _________ slides vertically
through a trunk in each hull to provide lateral resistance and
improved performance when sailing into _______________
Answer: Daggerboard, windward
◉ A catamaran's _______________ is derived from the buoyancy in its
two widely separated hulls. Even so, care must be taken to avoid
overloading, and distribute the weight ________
Answer: Stability, evenly
◉ Located on the forward crossbeam the ____________ _____________
provides reinforcement to counter the effect of forestay tension
Answer: Seagull striker
◉ The downward force of the catamaran's mast is supported by the
center___________ integrated into the Bridgedeck structure. The
Mainsheet traveler is often mounted over the _____________ crossbeam
, Answer: Crossbeam, aft
◉ A typical cruising catamaran sail plan consists of a large __________ -
_________ mainsail and a roller-furling jib.
Answer: Fully-Battened
◉ When a catamaran's steering wheel is turned, the __________
operate together because they are connected by a tie rod. They are
smaller than those on a monohull, but their efficiency is increased
due to the lack of __________.
Answer: Rudders, Heeling
◉ Name four systems or components that must be duplicated on a
catamaran: _________, ____________,_____________,_____________
Answer: Engines, running gear, cooling exhaust, electrical, fuel, bilge
pumps
◉ An engine's ______________ battery is generally collocated with the
engine and charged by an ____________on the same engine
Answer: Start, alternator
◉ Take care to ensure that the levels in the ___________ and ___________
tanks are balanced, especially if they are located away from the
boat's centerline.
