ENGINEERING - BDOC LATEST ACTUAL EXAM WITH
VERIFIED QUESTIONS & CORRECT ANSWERS
Question 1.
Repair lockers onboard
ANSWER
Repair 2 - FWD Repair 5 - Engineering Repair 3 - AFT
Question 2.
Minimum Personnel Requirements
ANSWER
Repair Party Leader On Scene Leader Attack Team Leader - Nozzleman - Hoseman - Plugman Two
Investigators Boundryman Repair Electrician
Question 3.
Members of a Rapid Response Team
ANSWER
Fire Marshal Repair Electrician Two Advanced DC-qualified personnel They are the first on the scene,
not dressed in FFE.
Question 4.
Attack Team
ANSWER
Attack Team Leader Nozzleman Hoseman Plugman
Question 5.
Where are fire boundaries set?
ANSWER
Only set at transverse bulkheads
Question 6.
Sound-powered lines for each repair locker? Fire Tetrahedron
ANSWER
2JZ - DC Central to Repair stations 4JZ - Repair 2 5JZ - Repair 3 7JZ - Repair 5
1
,Question 7.
Class A Fire
ANSWER
Ordinary Combustible Water
Question 8.
Class B Fire
ANSWER
Flammable Liquids AFFF, PKP, HALON
Question 9.
Class C Fire
ANSWER
Live Electrical equipment CO2
Question 10.
Class D Fire
ANSWER
Combustible metals Jettison
Question 11.
Special Fire
ANSWER
Ammunition, explosives, lithium batteries Water, AFFF, Jettison
Question 12.
PKP Extinguisher
ANSWER
Class B Fires (Breaks Chemical Chain Reaction) Sizes: lbs Ranges: 19 to 21 ft Discharge times:
seconds
Question 13.
AFFF Extinguisher
ANSWER
Class B Fires (Vapor Barrier & Cooling) Sizes: 28 lbs Ranges: 10 ft Discharge times: 45 to 65 seconds
2
, Question 14.
CO2 Extinguisher
ANSWER
Class C Fires (Displaces Oxygen) Size: 15 lbs Ranges: 4 to 6 ft Discharge times: roughly 35 seconds
Question 15.
Soft Patch
ANSWER
must extend 2" past damage not recommended for fuel/steam lines
Question 16.
Jubilee Patch
ANSWER
- 100 psi or less - Gasket must overlap 2 in on all sides
Question 17.
Emergency Water-Activated Repair Patch
ANSWER
- Fully hardens in 30 min - Can't use on fuel or potable water - Systems 150 psi or less and less than
300F
Question 18.
NFTI & Thermal Imaging camera
ANSWER
- Used during overhaul to find base of fire - Cut through thick smoke to identify hot spots
Question 19.
Firemain Configurations
ANSWER
Horizontal Vertical Offset Composite
3
VERIFIED QUESTIONS & CORRECT ANSWERS
Question 1.
Repair lockers onboard
ANSWER
Repair 2 - FWD Repair 5 - Engineering Repair 3 - AFT
Question 2.
Minimum Personnel Requirements
ANSWER
Repair Party Leader On Scene Leader Attack Team Leader - Nozzleman - Hoseman - Plugman Two
Investigators Boundryman Repair Electrician
Question 3.
Members of a Rapid Response Team
ANSWER
Fire Marshal Repair Electrician Two Advanced DC-qualified personnel They are the first on the scene,
not dressed in FFE.
Question 4.
Attack Team
ANSWER
Attack Team Leader Nozzleman Hoseman Plugman
Question 5.
Where are fire boundaries set?
ANSWER
Only set at transverse bulkheads
Question 6.
Sound-powered lines for each repair locker? Fire Tetrahedron
ANSWER
2JZ - DC Central to Repair stations 4JZ - Repair 2 5JZ - Repair 3 7JZ - Repair 5
1
,Question 7.
Class A Fire
ANSWER
Ordinary Combustible Water
Question 8.
Class B Fire
ANSWER
Flammable Liquids AFFF, PKP, HALON
Question 9.
Class C Fire
ANSWER
Live Electrical equipment CO2
Question 10.
Class D Fire
ANSWER
Combustible metals Jettison
Question 11.
Special Fire
ANSWER
Ammunition, explosives, lithium batteries Water, AFFF, Jettison
Question 12.
PKP Extinguisher
ANSWER
Class B Fires (Breaks Chemical Chain Reaction) Sizes: lbs Ranges: 19 to 21 ft Discharge times:
seconds
Question 13.
AFFF Extinguisher
ANSWER
Class B Fires (Vapor Barrier & Cooling) Sizes: 28 lbs Ranges: 10 ft Discharge times: 45 to 65 seconds
2
, Question 14.
CO2 Extinguisher
ANSWER
Class C Fires (Displaces Oxygen) Size: 15 lbs Ranges: 4 to 6 ft Discharge times: roughly 35 seconds
Question 15.
Soft Patch
ANSWER
must extend 2" past damage not recommended for fuel/steam lines
Question 16.
Jubilee Patch
ANSWER
- 100 psi or less - Gasket must overlap 2 in on all sides
Question 17.
Emergency Water-Activated Repair Patch
ANSWER
- Fully hardens in 30 min - Can't use on fuel or potable water - Systems 150 psi or less and less than
300F
Question 18.
NFTI & Thermal Imaging camera
ANSWER
- Used during overhaul to find base of fire - Cut through thick smoke to identify hot spots
Question 19.
Firemain Configurations
ANSWER
Horizontal Vertical Offset Composite
3
