Fist Cert MQF Exam Prep Questions with
Guaranteed Pass Solutions 2026-2027
Set.
JFO Target Brief - Answer What format would an observer use when the
decision has been made to attack a target using
CAS?
Airspace Coordination Area - Answer A three-dimensional block of airspace in a target
area, established by the appropriate commander, in
which friendly aircraft are reasonably safe from
friendly surface fires. It is normally established using
lateral, altitude, or time separation, or a combination
thereof
Restrictive Firing Line - Answer The _____________ is a line established between
converging friendly forces — one or both may be
moving — that prohibits joint fires or the effects of
joint fires across the line without coordination with
the affected force. The purpose of the line is to
prevent friendly fire and duplication of engagements
by converging friendly forces.
Restrictive Fire Area - Answer A ___________ is an area in which specific
restrictions are imposed and into which fires (or the
effects of fires) that exceed those restrictions will not
be delivered without coordination with the
establishing HQ.
No Fire Area - Answer A _____________ is a land area designated by the
appropriate commander into which fires or their
effects are prohibited.
Kill Box - Answer A __________ is a three-dimensional area used to
,facilitate the integration of joint fires and airspace.
Free Fire Area - Answer A ______________________ is a specific
designated area into which any weapon system may
fire without additional coordination with the
establishing HQ. It is used to expedite joint fires and
to facilitate emergency jettison of aircraft munitions.
Fire Support Coordination Line - Answer ______________ facilitate the expeditious
engagement of targets of opportunity beyond the
coordinating measure. It applies to all fires of air,
land, and maritime-based weapon systems using
any type of munition against surface targets.
Coordinated Firing Line - Answer A ______________ is a line beyond which
conventional, indirect, surface fire support means
may create effects at any time within the boundaries
of the establishing HQ without additional
coordination.
a. Fire Support
Censor zone - Answer A _______________ is an area from which radar is
prohibited from reporting acquisitions. Normally
placed around friendly weapon systems to prevent
them from being acquired by friendly radars.
Critical friendly zone - Answer A _______________ is an area, usually a friendly
unit or location which the maneuver commander
designates as critical to the protection of an asset
whose loss would seriously jeopardize the mission.
Position area for artillery PAA - Answer A ___________________ is an area assigned to an
artillery unit where individual artillery systems can
maneuver to increase their survivability.
,Boundary - Answer A _______________ is a line that delineates
surface areas for the purpose of facilitating
coordination and deconfliction of operations
between adjacent units, formations, or areas (JP 3-
0). It divides up areas of operation and define
responsibility for clearance of fires. It i
True / False: Restrictive fire support coordination
measures are those that provide safeguards for
friendly forces and noncombatants, facilities, or
terrain. - Answer True
Permissive fire support coordination measures
____________ the attack of targets by reducing the
coordination necessary for the clearance of fires - Answer Facilitate
Clearance of fires - Answer ________________________ is the process by
which the supported commander ensures that fires
or their effects will have no unintended
consequences on friendly units or the scheme of
maneuver.
a. Collateral d
Measure of effectiveness - Answer A ____________________ is a criterion used to
assess changes in system behavior, capability, or
operational environment that is tied to measuring
the attainment of an end state, achievement of an
objective, or creation of an effect.
Measure of performance - Answer A _______________ is a criterion used to assess
friendly actions that is tied to measuring task
accomplishment.
Decisive operation - Answer The ______________ is the operation that directly
accomplishes the mission.
, Target area of interest - Answer _________________is the geographical area
where high-value targets can be acquired and
engaged by friendly forces.
______________ occurs throughout the operations
process. Targeting is continuously refined and
adjusted between the commander and staff as the
operation unfolds. Combat assessment measures
how effectively attack systems and munitions
functioned, effects on the target, and a
recommendation as to whether the target should be
reattacked. - Answer Assess
Detect - Answer The second step of the targeting process,
___________, directs how and which target
acquisition assets find the specified targets to the
requisite level of accuracy.
Decide - Answer _________ is the first step in the targeting process.
It begins with the military decision-making process
(MDMP). It does not end when the plan is
completed; the decide function continues throughout
the operation.
a. Target selection standards - Answer ______________ are criteria applied to enemy
activity (acquisitions and battlefield information)
used in deciding whether the activity is a target.
Targeting - Answer . _____________ is the process of selecting and
prioritizing targets and matching the appropriate
response to them, considering operational
requirements and capabilities.
Fire support coordination - Answer _____________ is the planning and executing of
Guaranteed Pass Solutions 2026-2027
Set.
JFO Target Brief - Answer What format would an observer use when the
decision has been made to attack a target using
CAS?
Airspace Coordination Area - Answer A three-dimensional block of airspace in a target
area, established by the appropriate commander, in
which friendly aircraft are reasonably safe from
friendly surface fires. It is normally established using
lateral, altitude, or time separation, or a combination
thereof
Restrictive Firing Line - Answer The _____________ is a line established between
converging friendly forces — one or both may be
moving — that prohibits joint fires or the effects of
joint fires across the line without coordination with
the affected force. The purpose of the line is to
prevent friendly fire and duplication of engagements
by converging friendly forces.
Restrictive Fire Area - Answer A ___________ is an area in which specific
restrictions are imposed and into which fires (or the
effects of fires) that exceed those restrictions will not
be delivered without coordination with the
establishing HQ.
No Fire Area - Answer A _____________ is a land area designated by the
appropriate commander into which fires or their
effects are prohibited.
Kill Box - Answer A __________ is a three-dimensional area used to
,facilitate the integration of joint fires and airspace.
Free Fire Area - Answer A ______________________ is a specific
designated area into which any weapon system may
fire without additional coordination with the
establishing HQ. It is used to expedite joint fires and
to facilitate emergency jettison of aircraft munitions.
Fire Support Coordination Line - Answer ______________ facilitate the expeditious
engagement of targets of opportunity beyond the
coordinating measure. It applies to all fires of air,
land, and maritime-based weapon systems using
any type of munition against surface targets.
Coordinated Firing Line - Answer A ______________ is a line beyond which
conventional, indirect, surface fire support means
may create effects at any time within the boundaries
of the establishing HQ without additional
coordination.
a. Fire Support
Censor zone - Answer A _______________ is an area from which radar is
prohibited from reporting acquisitions. Normally
placed around friendly weapon systems to prevent
them from being acquired by friendly radars.
Critical friendly zone - Answer A _______________ is an area, usually a friendly
unit or location which the maneuver commander
designates as critical to the protection of an asset
whose loss would seriously jeopardize the mission.
Position area for artillery PAA - Answer A ___________________ is an area assigned to an
artillery unit where individual artillery systems can
maneuver to increase their survivability.
,Boundary - Answer A _______________ is a line that delineates
surface areas for the purpose of facilitating
coordination and deconfliction of operations
between adjacent units, formations, or areas (JP 3-
0). It divides up areas of operation and define
responsibility for clearance of fires. It i
True / False: Restrictive fire support coordination
measures are those that provide safeguards for
friendly forces and noncombatants, facilities, or
terrain. - Answer True
Permissive fire support coordination measures
____________ the attack of targets by reducing the
coordination necessary for the clearance of fires - Answer Facilitate
Clearance of fires - Answer ________________________ is the process by
which the supported commander ensures that fires
or their effects will have no unintended
consequences on friendly units or the scheme of
maneuver.
a. Collateral d
Measure of effectiveness - Answer A ____________________ is a criterion used to
assess changes in system behavior, capability, or
operational environment that is tied to measuring
the attainment of an end state, achievement of an
objective, or creation of an effect.
Measure of performance - Answer A _______________ is a criterion used to assess
friendly actions that is tied to measuring task
accomplishment.
Decisive operation - Answer The ______________ is the operation that directly
accomplishes the mission.
, Target area of interest - Answer _________________is the geographical area
where high-value targets can be acquired and
engaged by friendly forces.
______________ occurs throughout the operations
process. Targeting is continuously refined and
adjusted between the commander and staff as the
operation unfolds. Combat assessment measures
how effectively attack systems and munitions
functioned, effects on the target, and a
recommendation as to whether the target should be
reattacked. - Answer Assess
Detect - Answer The second step of the targeting process,
___________, directs how and which target
acquisition assets find the specified targets to the
requisite level of accuracy.
Decide - Answer _________ is the first step in the targeting process.
It begins with the military decision-making process
(MDMP). It does not end when the plan is
completed; the decide function continues throughout
the operation.
a. Target selection standards - Answer ______________ are criteria applied to enemy
activity (acquisitions and battlefield information)
used in deciding whether the activity is a target.
Targeting - Answer . _____________ is the process of selecting and
prioritizing targets and matching the appropriate
response to them, considering operational
requirements and capabilities.
Fire support coordination - Answer _____________ is the planning and executing of
