Mako PKA
Comprehensive Resource To Help You Ace Exams Includes
Frequently Tested Questions With ELABORATED 100%
Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. During Bone Reg, a medial tibia has the same # of points as a lateral
tibia - CORRECT ANSWER False
2. You can use either 3.2x110 pins or 4.0x110 pins for the tibia -
CORRECT ANSWER True
3. You cannot change the plan intraoperatively once patient time out is
accepted - CORRECT ANSWER false
4. During pre-op planning, the MPS should select a femoral component
that covers about 75% of the femoral condyle - CORRECT ANSWER
True
5. What does FFC stand for - CORRECT ANSWER Flexion Facet
Center
6. Where can you change "planar workflow" to "burr only workflow" in
Mako PKA 3.0? - CORRECT ANSWER Surgeon Preferences
7. How much does the component move when clicking the "translational
arrows" in PKA 3.0? - CORRECT ANSWER 0.25mm
8. How much does the component move when clicking the "rotational
arrows" in mako PKA 3.0? - CORRECT ANSWER 0.5 degrees
9. During bone reg, the pattern of a medial uni femur is the same as a
bi-comp femur - CORRECT ANSWER False
10. A mako PKA 3.0 plan can be opened in a mako PKA 2.5.6x
application - CORRECT ANSWER False
,11. Burr only workflow; can robotic arm be positioned on non-
operative side? - CORRECT ANSWER Yes
12. Mako PKA 3.0 can be opened in the Mako TKA application -
CORRECT ANSWER False
13. Mako PKA 2.5.6 plan can be opened in a 3.0 applicaiton -
CORRECT ANSWER True
14. If planar workflow is selected, robotic arm must be positioned
on the same side as operative side - CORRECT ANSWER True
15. If a surgeon chooses to switch from a Patellofemoral procedure
intraoperatively in the mako PKA 3.0 app, on which page does the
MPS change the implant? - CORRECT ANSWER Patient Information
16. What is the recommended workflow for a lateral procedure in
the mako 3.0 app? - CORRECT ANSWER Burr only
17. How does the mako Partial Knee 3.0 application appear in the
GUI? - CORRECT ANSWER PKA Mics
18. The average thickness of healthy cartilage is? - CORRECT
ANSWER 2mm
19. How does the mako partial knee 2.5.6 appear in the GUI? -
CORRECT ANSWER PKA Burr
20. For the planar workflow, which step is required for RIO
Registration in Mako Partial Knee 3.0? - CORRECT ANSWER Rio
Set up
21. When the burr only workflow is selected, the robotic arm can
only be positioned on the operative side in mako PKA 3.0 -
CORRECT ANSWER False
22. During probe check in Mako PKA 3.0, verifying the probe does
not require pressing "capture" - CORRECT ANSWER True
, 23. When the burr-only workflow is selected, the robotic arm can be
positioned on the operative or non-operative side in mako PKA 3.0 -
CORRECT ANSWER true
24. In mako PKA, Rio Reg is done with the registration tool and the
end effector array - CORRECT ANSWER True
25. The mako PKA 3.0 is approved for use w/ stryker's leg
positioner and self-retractors - CORRECT ANSWER true
26. In the burr-only workflow, how is the robotic arm positioned for
rio reg in mako PKA 3.0? - CORRECT ANSWER 90-90-90
27. In mako PKA 3.0, rio reg is done w/ the burr and the end
effector array - CORRECT ANSWER false
28. In the planar workflow, how is the robotic arm positioned for rio
reg? - CORRECT ANSWER rio setup
29. When attaching the irrigation clip, how do you instruct the scrub
tech to orient the irrigation clip in PKA 3.0? - CORRECT ANSWER
Burr guard is thicker than the burr - arrow on irrigation clip points
towards the tip of the burr
30. What attachments are used for the mako PKA 3.0 workflow -
CORRECT ANSWER straight saw attachment, rotary attachment
31. If the long guard and rotary attachment are assembled properly,
the laser markings (black lines) on them will match - CORRECT
ANSWER true
32. There is a planar probe option to check the depth of the
resection in Mako PKA 3.0 - CORRECT ANSWER False
33. The MICS is a high torque cutting tool - CORRECT ANSWER
true
34. In PKA, the gap is calculated between the 2 virtual implants -
CORRECT ANSWER True
Comprehensive Resource To Help You Ace Exams Includes
Frequently Tested Questions With ELABORATED 100%
Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
1. During Bone Reg, a medial tibia has the same # of points as a lateral
tibia - CORRECT ANSWER False
2. You can use either 3.2x110 pins or 4.0x110 pins for the tibia -
CORRECT ANSWER True
3. You cannot change the plan intraoperatively once patient time out is
accepted - CORRECT ANSWER false
4. During pre-op planning, the MPS should select a femoral component
that covers about 75% of the femoral condyle - CORRECT ANSWER
True
5. What does FFC stand for - CORRECT ANSWER Flexion Facet
Center
6. Where can you change "planar workflow" to "burr only workflow" in
Mako PKA 3.0? - CORRECT ANSWER Surgeon Preferences
7. How much does the component move when clicking the "translational
arrows" in PKA 3.0? - CORRECT ANSWER 0.25mm
8. How much does the component move when clicking the "rotational
arrows" in mako PKA 3.0? - CORRECT ANSWER 0.5 degrees
9. During bone reg, the pattern of a medial uni femur is the same as a
bi-comp femur - CORRECT ANSWER False
10. A mako PKA 3.0 plan can be opened in a mako PKA 2.5.6x
application - CORRECT ANSWER False
,11. Burr only workflow; can robotic arm be positioned on non-
operative side? - CORRECT ANSWER Yes
12. Mako PKA 3.0 can be opened in the Mako TKA application -
CORRECT ANSWER False
13. Mako PKA 2.5.6 plan can be opened in a 3.0 applicaiton -
CORRECT ANSWER True
14. If planar workflow is selected, robotic arm must be positioned
on the same side as operative side - CORRECT ANSWER True
15. If a surgeon chooses to switch from a Patellofemoral procedure
intraoperatively in the mako PKA 3.0 app, on which page does the
MPS change the implant? - CORRECT ANSWER Patient Information
16. What is the recommended workflow for a lateral procedure in
the mako 3.0 app? - CORRECT ANSWER Burr only
17. How does the mako Partial Knee 3.0 application appear in the
GUI? - CORRECT ANSWER PKA Mics
18. The average thickness of healthy cartilage is? - CORRECT
ANSWER 2mm
19. How does the mako partial knee 2.5.6 appear in the GUI? -
CORRECT ANSWER PKA Burr
20. For the planar workflow, which step is required for RIO
Registration in Mako Partial Knee 3.0? - CORRECT ANSWER Rio
Set up
21. When the burr only workflow is selected, the robotic arm can
only be positioned on the operative side in mako PKA 3.0 -
CORRECT ANSWER False
22. During probe check in Mako PKA 3.0, verifying the probe does
not require pressing "capture" - CORRECT ANSWER True
, 23. When the burr-only workflow is selected, the robotic arm can be
positioned on the operative or non-operative side in mako PKA 3.0 -
CORRECT ANSWER true
24. In mako PKA, Rio Reg is done with the registration tool and the
end effector array - CORRECT ANSWER True
25. The mako PKA 3.0 is approved for use w/ stryker's leg
positioner and self-retractors - CORRECT ANSWER true
26. In the burr-only workflow, how is the robotic arm positioned for
rio reg in mako PKA 3.0? - CORRECT ANSWER 90-90-90
27. In mako PKA 3.0, rio reg is done w/ the burr and the end
effector array - CORRECT ANSWER false
28. In the planar workflow, how is the robotic arm positioned for rio
reg? - CORRECT ANSWER rio setup
29. When attaching the irrigation clip, how do you instruct the scrub
tech to orient the irrigation clip in PKA 3.0? - CORRECT ANSWER
Burr guard is thicker than the burr - arrow on irrigation clip points
towards the tip of the burr
30. What attachments are used for the mako PKA 3.0 workflow -
CORRECT ANSWER straight saw attachment, rotary attachment
31. If the long guard and rotary attachment are assembled properly,
the laser markings (black lines) on them will match - CORRECT
ANSWER true
32. There is a planar probe option to check the depth of the
resection in Mako PKA 3.0 - CORRECT ANSWER False
33. The MICS is a high torque cutting tool - CORRECT ANSWER
true
34. In PKA, the gap is calculated between the 2 virtual implants -
CORRECT ANSWER True
