Naui Elearning Open Water Scuba Diver Final Test Latest Test Questions
And Correct Answers (Graded A+) | Verified Answers | Just Released
Your entry-level NAUI Scuba Diver certification is a "license to _____." - (CORRECT ANSWER)learn
physical fitness is an important consideration for scuba divers because it helps to prevent diving
accidents due to - (CORRECT ANSWER)exhaustion
Completing this entry-level scuba certification course makes you knowledgeable and skillful enough to
dive safely in or at: - (CORRECT ANSWER)open water with conditions similar to those in which you were
trained
Which of the following physical factors can make you incapable of sustaining efforts sometimes
demanded when participating in recreational diving? - (CORRECT ANSWER)ALL OF THE ABOVE
-inadequate sleep
-recent head cold
-recent ingestion of drugs
Diving equipment should be - (CORRECT ANSWER)rinsed thoroughly, dried and stored in a cool place
open heel fins are usually the fins of choice for scuba divers because - (CORRECT ANSWER)they may be
used in a wide variety of environmental conditions
Factors that can affect the breathing ease of a snorkel are - (CORRECT ANSWER)length AND diameter
When selecting a face mask, the most important thing to consider is - (CORRECT ANSWER)proper seal
and fit
Snorkels over 15 inches in length are not recommended primarily because - (CORRECT ANSWER)They
have too much dead air space
1
,when buying or renting equipment for diving, the most important consideration is: - (CORRECT
ANSWER)the fit on your body
Hydrostatic and visual inspection standards are different around the world. Consult your local NAUI
facility to learn about the regulations in your area T or F - (CORRECT ANSWER)True
Engraved markings on scuba tanks include: - (CORRECT ANSWER)Date of hydrostatic test, serial number,
type of material
Two types of materials that scuba tanks are made from are steel and _________. - (CORRECT
ANSWER)aluminum
scuba tanks should always have some pressure in them to prevent _______________ - (CORRECT
ANSWER)moisture from entering
You should have your regulator serviced by a certified repair technician - (CORRECT ANSWER)As
recommended by the manufacturer
The stage of the regulator which reduces working tank pressure to intermediate pressure is - (CORRECT
ANSWER)The first stage
The _____ line is the direction of travel line on the compass - (CORRECT ANSWER)Lubber
When rinsing a regulator it is best to: - (CORRECT ANSWER)Leave the regulator attached to the tank or
have the dust cap in place
A ____ calculates your remaining allowable bottom time while diving - (CORRECT ANSWER)dive
computer
2
, A diving watch must be able to withstand pressure and measure ____. - (CORRECT ANSWER)Elapsed
time
Proper maintenance of instruments includes: - (CORRECT ANSWER)ALL OF THE ABOVE -->
Rinse them in fresh water at the end of each diving day.
Have them inspected and serviced annually by a qualified technician.
Do not subject them to extreme temperature changes.
Three main types of __ are back floatation, jacket, and horse collar - (CORRECT ANSWER)BCs
Essential features found on all BCs are: - (CORRECT ANSWER)ALL OF THEE ABOVE -->
power inflator mechanism
overpressure relief valve
inflator/deflator hose
You should rinse your BC internally because _____ inside your BC can cause damage. - (CORRECT
ANSWER)ALL OF THE ABOVE -->
salt water
dirty water
chlorinated water
The most important feature of the weight belt is ___. - (CORRECT ANSWER)quick release
A _____ compensates for the compression of a wetsuit as you descend underwater - (CORRECT
ANSWER)compensating weight belt
3
And Correct Answers (Graded A+) | Verified Answers | Just Released
Your entry-level NAUI Scuba Diver certification is a "license to _____." - (CORRECT ANSWER)learn
physical fitness is an important consideration for scuba divers because it helps to prevent diving
accidents due to - (CORRECT ANSWER)exhaustion
Completing this entry-level scuba certification course makes you knowledgeable and skillful enough to
dive safely in or at: - (CORRECT ANSWER)open water with conditions similar to those in which you were
trained
Which of the following physical factors can make you incapable of sustaining efforts sometimes
demanded when participating in recreational diving? - (CORRECT ANSWER)ALL OF THE ABOVE
-inadequate sleep
-recent head cold
-recent ingestion of drugs
Diving equipment should be - (CORRECT ANSWER)rinsed thoroughly, dried and stored in a cool place
open heel fins are usually the fins of choice for scuba divers because - (CORRECT ANSWER)they may be
used in a wide variety of environmental conditions
Factors that can affect the breathing ease of a snorkel are - (CORRECT ANSWER)length AND diameter
When selecting a face mask, the most important thing to consider is - (CORRECT ANSWER)proper seal
and fit
Snorkels over 15 inches in length are not recommended primarily because - (CORRECT ANSWER)They
have too much dead air space
1
,when buying or renting equipment for diving, the most important consideration is: - (CORRECT
ANSWER)the fit on your body
Hydrostatic and visual inspection standards are different around the world. Consult your local NAUI
facility to learn about the regulations in your area T or F - (CORRECT ANSWER)True
Engraved markings on scuba tanks include: - (CORRECT ANSWER)Date of hydrostatic test, serial number,
type of material
Two types of materials that scuba tanks are made from are steel and _________. - (CORRECT
ANSWER)aluminum
scuba tanks should always have some pressure in them to prevent _______________ - (CORRECT
ANSWER)moisture from entering
You should have your regulator serviced by a certified repair technician - (CORRECT ANSWER)As
recommended by the manufacturer
The stage of the regulator which reduces working tank pressure to intermediate pressure is - (CORRECT
ANSWER)The first stage
The _____ line is the direction of travel line on the compass - (CORRECT ANSWER)Lubber
When rinsing a regulator it is best to: - (CORRECT ANSWER)Leave the regulator attached to the tank or
have the dust cap in place
A ____ calculates your remaining allowable bottom time while diving - (CORRECT ANSWER)dive
computer
2
, A diving watch must be able to withstand pressure and measure ____. - (CORRECT ANSWER)Elapsed
time
Proper maintenance of instruments includes: - (CORRECT ANSWER)ALL OF THE ABOVE -->
Rinse them in fresh water at the end of each diving day.
Have them inspected and serviced annually by a qualified technician.
Do not subject them to extreme temperature changes.
Three main types of __ are back floatation, jacket, and horse collar - (CORRECT ANSWER)BCs
Essential features found on all BCs are: - (CORRECT ANSWER)ALL OF THEE ABOVE -->
power inflator mechanism
overpressure relief valve
inflator/deflator hose
You should rinse your BC internally because _____ inside your BC can cause damage. - (CORRECT
ANSWER)ALL OF THE ABOVE -->
salt water
dirty water
chlorinated water
The most important feature of the weight belt is ___. - (CORRECT ANSWER)quick release
A _____ compensates for the compression of a wetsuit as you descend underwater - (CORRECT
ANSWER)compensating weight belt
3
